README.md: some hints for Arduino LoL Shield users

This commit is contained in:
Christian Kroll 2014-05-29 04:33:17 +02:00
parent 54bc57fcf0
commit 041dc7bea0
1 changed files with 39 additions and 1 deletions

View File

@ -131,6 +131,44 @@ compile the source code to a native host application so you can step through
your C-Code with an ordinary host debugger. The GUI thread reads the simulated your C-Code with an ordinary host debugger. The GUI thread reads the simulated
frame buffer every 20ms (40ms on Windows) and draws its contents. frame buffer every 20ms (40ms on Windows) and draws its contents.
Joystick directions are simulated by the WASD keys and SPACE acts as the fire Joystick movements are simulated by the WASD keys and SPACE acts as the fire
button. The OpenGL based simulator (Linux/BSD) enables you to adjust the button. The OpenGL based simulator (Linux/BSD) enables you to adjust the
viewing angle of the LED matrix via the arrow keys (not available on Windows). viewing angle of the LED matrix via the arrow keys (not available on Windows).
LoL Shield on Arduino (and clones)
----------------------------------
Although this project supports the LoL Shield on various Arduino boards, it does
not use the Arduino software stack at all. Instead, it follows the classical
Unix approach involving make files and mere command line tools. If you haven't
used anything besides the Arduino IDE, getting the Borgware to run (let alone
extending it) might be difficult at first. This README won't even try to cover
all workflows involved.
However, here are some hints:
* Find out what 'avrdude' command line parameters are used by the Arduino IDE to
flash your device (look into the upload log). Use that parameters (with the -U
option pointing to the Borgware 'image.hex' file) to flash your board.
* Pay attention to the size of your image. Borgware 2D can easily be configured
to exceed the usable flash memory of a 32 KiB device. After a successful
build, both flash and SRAM usage are displayed. Keep in mind that stock
Arduino MCUs already reserve 0.5 to 4KiB of flash memory for bootloaders.
* Same with SRAM. The "data size" should not exceed 2KiB (make that 1.5 KiB as
we still need some additional SRAM at runtime).
* In case avrdude gives you a verification error, chances are that your image
already reaches the bootloader area in the flash. Try to disable some
animations or games in Menuconfig to trim your image.
Digital joysticks are supported on the 'analog' pins, which are used in digital
input mode with internal pullups turned on. Just connect them to GND to signal
joystick movements.
| Arduino Pin | Meaning |
| ----------- | ------------- |
| A0 | Up |
| A1 | Down |
| A2 | Left |
| A3 | Right |
| A4 | Not Connected |
| A5 | Fire |