pingpair_blocking test now uses expect and runs on linux

This commit is contained in:
maniacbug 2012-01-15 22:07:13 -08:00
parent c2e9564678
commit dec61af85f
6 changed files with 175 additions and 148 deletions

View File

@ -1,206 +1,219 @@
PROJECT_NAME = $(PWD:B) ; # (1) Project Information
PROJECT_DIR = . ;
PROJECT_LIBS = SPI RF24 ;
OUT_DIR = ojam ; PROJECT_LIBS = SPI RF24 ;
F_CPU = 16000000 ; PROJECT_DIRS = $(PWD) ;
MCU = atmega328p ;
PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ;
UPLOAD_RATE = 57600 ; # (2) Board Information
AVRDUDE_PROTOCOL = stk500v1 ;
COM = 33 ; UPLOAD_PROTOCOL ?= arduino ;
UPLOAD_SPEED ?= 57600 ;
MCU ?= atmega328p ;
F_CPU ?= 16000000 ;
CORE ?= arduino ;
VARIANT ?= standard ;
ARDUINO_VERSION ?= 100 ;
# (3) USB Ports
PORTS = p4 p6 p9 u0 u1 u2 ;
PORT_p6 = /dev/tty.usbserial-A600eHIs ;
PORT_p4 = /dev/tty.usbserial-A40081RP ;
PORT_p9 = /dev/tty.usbserial-A9007LmI ;
PORT_u0 = /dev/ttyUSB0 ;
PORT_u1 = /dev/ttyUSB1 ;
PORT_u2 = /dev/ttyUSB2 ;
# (4) Location of AVR tools
#
# This configuration assumes using avr-tools that were obtained separate from the Arduino
# distribution.
# Host-specific overrides for locations
if $(OS) = MACOSX if $(OS) = MACOSX
{ {
ARDUINO_VERSION = 22 ; AVR_BIN ?= /usr/local/avrtools/bin ;
OLD_DIR = /opt/arduino-0021 ; AVR_ETC = /usr/local/avrtools/etc ;
AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; AVR_INCLUDE = /usr/local/avrtools/include ;
AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; }
ARDUINO_DIR = /opt/Arduino ; else
ARDUINO_AVR = /usr/lib/avr/include ; {
AVR_BIN ?= /usr/bin ;
AVR_INCLUDE = /usr/lib/avr/include ;
AVR_ETC = /etc ;
} }
# Where is everything? # (5) Directories where Arduino core and libraries are located
ARDUINO_VERSION ?= 22 ;
AVR_TOOLS_PATH ?= /usr/bin ; ARDUINO_DIR ?= /opt/Arduino ;
ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/$(CORE) $(ARDUINO_DIR)/hardware/arduino/variants/$(VARIANT) ;
ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ;
AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ;
ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ;
ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; ARDUINO_LIB = $(ARDUINO_DIR)/libraries ;
SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; SKETCH_LIB = $(HOME)/Source/Arduino/libraries ;
AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ;
AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ;
AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ;
AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ;
AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ;
DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; #
CTUNING = -ffunction-sections -fdata-sections ; # --------------------------------------------------
CXXTUNING = -fno-exceptions -fno-strict-aliasing ; # Below this line usually never needs to be modified
CFLAGS = -Os -Werror -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; #
CXXFLAGS = $(CFLAGS) $(CXXTUNING) ;
LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; # Tool locations
CC = $(AVR_BIN)/avr-gcc ;
C++ = $(AVR_BIN)/avr-g++ ;
LINK = $(AVR_BIN)/avr-gcc ;
AR = $(AVR_BIN)/avr-ar rcs ;
RANLIB = ;
OBJCOPY = $(AVR_BIN)/avr-objcopy ;
AVRDUDE ?= $(AVR_BIN)/avrdude ;
# Flags
DEFINES += F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ;
OPTIM = -Os ;
CCFLAGS = -Wall -Wextra -Wno-strict-aliasing -mmcu=$(MCU) -ffunction-sections -fdata-sections ;
C++FLAGS = $(CCFLAGS) -fno-exceptions -fno-strict-aliasing ;
LINKFLAGS = $(OPTIM) -lm -Wl,--gc-sections -mmcu=$(MCU) ;
AVRDUDEFLAGS = -V -F -D -C $(AVR_ETC)/avrdude.conf -p $(MCU) -c $(UPLOAD_PROTOCOL) -b $(UPLOAD_SPEED) ;
# Search everywhere for headers # Search everywhere for headers
HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ;
# Grab everything from the core directory HDRS = $(PROJECT_DIRS) $(AVR_INCLUDE) $(ARDUINO_CORE) $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) ;
CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ;
# Grab everything from libraries. To avoid this "grab everything" behaviour, you # Output locations
# can specify specific modules to pick up in PROJECT_MODULES
LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ;
# In addition to explicitly-specified program modules, pick up anything from the current LOCATE_TARGET = $(F_CPU) ;
# dir. LOCATE_SOURCE = $(F_CPU) ;
PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ;
# Shortcut for the out files #
OUT = $(OUT_DIR)/$(PROJECT_NAME) ; # Custom rules
#
# AvrDude setup
AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ;
rule GitVersion rule GitVersion
{ {
Always $(<) ; Always $(<) ;
Depends all : $(<) ; Depends all : $(<) ;
} }
actions GitVersion actions GitVersion
{ {
echo "const char program_version[] = \"\\" > $(<) echo "const char program_version[] = \"\\" > $(<)
git log -1 --pretty=format:%h >> $(<) git log -1 --pretty=format:%h >> $(<)
echo "\";" >> $(<) echo "\";" >> $(<)
} }
GitVersion version.h ; GitVersion version.h ;
rule AvrCc
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
Clean clean : $(<) ;
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
}
actions AvrCc
{
$(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>)
}
rule AvrC++
{
Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ;
Clean clean : $(<) ;
CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ;
CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ;
}
actions AvrC++
{
$(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>)
}
rule Pde rule Pde
{ {
Depends $(<) : $(>) ; Depends $(<) : $(>) ;
Depends $(<) : $(<:D) ; MakeLocate $(<) : $(LOCATE_SOURCE) ;
Clean clean : $(<) ; Clean clean : $(<) ;
}
if ( $(ARDUINO_VERSION) < 100 )
{
ARDUINO_H = WProgram.h ;
}
else
{
ARDUINO_H = Arduino.h ;
} }
actions Pde actions Pde
{ {
echo "#include <WProgram.h>" > $(<) echo "#include <$(ARDUINO_H)>" > $(<)
echo "#line 1 \"$(>)\"" >> $(<) echo "#line 1 \"$(>)\"" >> $(<)
cat $(>) >> $(<) cat $(>) >> $(<)
} }
rule AvrPde rule C++Pde
{ {
local _CPP = $(OUT_DIR)/$(_I:B).cpp ; local _CPP = $(>:B).cpp ;
Pde $(_CPP) : $(>) ; Pde $(_CPP) : $(>) ;
AvrC++ $(<) : $(_CPP) ; C++ $(<) : $(_CPP) ;
} }
rule AvrObject rule UserObject
{ {
switch $(>:S) switch $(>:S)
{ {
case .c : AvrCc $(<) : $(>) ; case .ino : C++Pde $(<) : $(>) ;
case .cpp : AvrC++ $(<) : $(>) ; case .pde : C++Pde $(<) : $(>) ;
case .pde : AvrPde $(<) : $(>) ; }
}
} }
rule AvrObjects rule Objects
{ {
for _I in $(<) local _i ;
{
AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; for _i in [ FGristFiles $(<) ]
} {
local _b = $(_i:B)$(SUFOBJ) ;
local _o = $(_b:G=$(SOURCE_GRIST:E)) ;
Object $(_o) : $(_i) ;
Depends obj : $(_o) ;
}
} }
rule AvrMainFromObjects rule Library
{ {
Depends $(<) : $(>) ; LibraryFromObjects $(<) : $(>:B)$(SUFOBJ) ;
Depends $(<) : $(<:D) ; Objects $(>) ;
MkDir $(<:D) ;
Depends all : $(<) ;
Clean clean : $(<) ;
} }
actions AvrMainFromObjects rule Main
{ {
$(AVR_LD) $(LDFLAGS) -o $(<) $(>) MainFromObjects $(<) : $(>:B)$(SUFOBJ) ;
Objects $(>) ;
} }
rule AvrMain rule Hex
{ {
AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; Depends $(<) : $(>) ;
AvrObjects $(>) ; MakeLocate $(<) : $(LOCATE_TARGET) ;
Depends hex : $(<) ;
Clean clean : $(<) ;
} }
rule AvrHex actions Hex
{ {
Depends $(<) : $(>) ; $(OBJCOPY) -O ihex -R .eeprom $(>) $(<)
Depends $(<) : $(<:D) ;
Depends hex : $(<) ;
Clean clean : $(<) ;
} }
actions AvrHex rule Upload
{ {
$(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) Depends $(1) : $(2) ;
Depends $(2) : $(3) ;
NotFile $(1) ;
Always $(1) ;
Always $(2) ;
UploadAction $(2) : $(3) ;
} }
rule AvrUpload actions UploadAction
{ {
Depends $(1) : $(2) ; $(AVRDUDE) $(AVRDUDEFLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i
Depends $(2) : $(3) ;
NotFile $(1) ;
Always $(1) ;
Always $(2) ;
AvrUploadAction $(2) : $(3) ;
} }
actions AvrUploadAction rule Arduino
{ {
$(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i LINKFLAGS on $(<) = $(LINKFLAGS) -Wl,-Map=$(LOCATE_TARGET)/$(<:B).map ;
Main $(<) : $(>) ;
LinkLibraries $(<) : core libs ;
Hex $(<:B).hex : $(<) ;
for _p in $(PORTS)
{
Upload $(_p) : $(PORT_$(_p)) : $(<:B).hex ;
}
} }
AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; #
AvrHex $(OUT).hex : $(OUT).elf ; # Targets
#
AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; # Grab everything from the core directory
AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; Library core : [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ;
AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ;
# Grab everything from libraries. To avoid this "grab everything" behaviour, you
# can specify specific modules to pick up in PROJECT_MODULES
Library libs : [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(ARDUINO_LIB)/$(PROJECT_LIBS)/utility $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp *.c ] ;
# Main output executable
Arduino $(PWD:B).elf : $(PROJECT_MODULES) [ GLOB $(PROJECT_DIRS) : *.c *.cpp *.pde *.ino ] ;

View File

@ -166,6 +166,9 @@ void setup(void)
// //
radio.printDetails(); radio.printDetails();
if ( role == role_pong_back )
printf("\n\r+OK ");
} }
void loop(void) void loop(void)

View File

@ -1,5 +1,5 @@
/* /*
Copyright (C) 2011 James Coliz, Jr. <maniacbug@ymail.com> Copyright (C) 2011 J. Coliz <maniacbug@ymail.com>
This program is free software; you can redistribute it and/or This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License modify it under the terms of the GNU General Public License
@ -16,7 +16,7 @@
#ifndef __PRINTF_H__ #ifndef __PRINTF_H__
#define __PRINTF_H__ #define __PRINTF_H__
#include "WProgram.h" #ifdef ARDUINO
int serial_putc( char c, FILE * ) int serial_putc( char c, FILE * )
{ {
@ -30,4 +30,8 @@ void printf_begin(void)
fdevopen( &serial_putc, 0 ); fdevopen( &serial_putc, 0 );
} }
#else
#error This example is only for use on Arduino.
#endif // ARDUINO
#endif // __PRINTF_H__ #endif // __PRINTF_H__

View File

@ -1,10 +1,10 @@
#!/opt/local/bin/python #!/usr/bin/python
import sys,serial import sys,serial
def read_until(token): def read_until(token):
while 1: while 1:
line = ser.readline(None,"\r") line = ser.readline(None)
sys.stdout.write(line) sys.stdout.write(line)
if (line.startswith(token)): if (line.startswith(token)):

View File

@ -1,9 +1,5 @@
#!/bin/sh #!/bin/sh
# Connect p6 to receiver, p4 to sender # Connect u0 to receiver, u1 to sender
jam p4 p6 || exit 1 jam u0 u1 && expect test.ex
./runtest.py /dev/tty.usbserial-A600eHIs 1 &
./runtest.py /dev/tty.usbserial-A40081RP 1 || ( kill `jobs -p` && exit 1 )
kill `jobs -p`
exit 0

11
tests/pingpair_blocking/test.ex Executable file
View File

@ -0,0 +1,11 @@
#/usr/bin/expect
set timeout 100
spawn picocom -b 57600 /dev/ttyUSB0
expect "+READY"
send "1"
expect "+OK"
spawn picocom -b 57600 /dev/ttyUSB1
expect "+READY"
send "1"
expect "+OK"