new hardware driver, still beta
This commit is contained in:
Hans-Gert Dahmen
parent
9c07418f23
commit
6325170d1c
|
|
@ -10,6 +10,10 @@ ifeq ($(BORG_HW),HW_BORG_16)
|
|||
SRC = borg_hw_borg16.c
|
||||
endif
|
||||
|
||||
ifeq ($(BORG_HW),HW_BORG_16_HGM)
|
||||
SRC = borg_hw_borg16_hgmod.c
|
||||
endif
|
||||
|
||||
ifeq ($(BORG_HW),HW_BORG_ANDRE)
|
||||
SRC = borg_hw_andreborg.c
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,245 @@
|
|||
#include "../config.h"
|
||||
#include "../makros.h"
|
||||
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/io.h>
|
||||
#include <avr/wdt.h>
|
||||
#include "borg_hw.h"
|
||||
|
||||
/*
|
||||
// those macros get defined via menuconfig, now
|
||||
*/
|
||||
|
||||
#define TLC_PIN_SIN 0
|
||||
#define TLC_PIN_SCLK 1
|
||||
#define TLC_PIN_SOUT 5
|
||||
#define TLC_PIN_XLAT 2
|
||||
#define TLC_PIN_BLANK 3
|
||||
#define TLC_PIN_VPRG 7
|
||||
#define TLC_PIN_DCPRG 4
|
||||
#define TLC_PIN_XERR 6
|
||||
|
||||
#define COLDDR DDR(COLPORT)
|
||||
#define ROWDDR DDR(ROWPORT)
|
||||
|
||||
#define SCLK() { \
|
||||
COLPORT |= _BV(TLC_PIN_SCLK); \
|
||||
COLPORT &= ~_BV(TLC_PIN_SCLK); \
|
||||
}
|
||||
|
||||
#define XLAT() { \
|
||||
COLPORT |= _BV(TLC_PIN_XLAT); \
|
||||
COLPORT &= ~_BV(TLC_PIN_XLAT); \
|
||||
}
|
||||
|
||||
/* more ifdef magic :-( */
|
||||
#ifdef __AVR_ATmega644P__
|
||||
#define OCR0 OCR0A
|
||||
#define SIG_OUTPUT_COMPARE0 SIG_OUTPUT_COMPARE0A
|
||||
#endif
|
||||
|
||||
// buffer which holds the currently shown frame
|
||||
unsigned char pixmap[NUMPLANE][NUM_ROWS][LINEBYTES];
|
||||
|
||||
// switch to next row
|
||||
static void nextrow(uint8_t row) {
|
||||
unsigned char i;
|
||||
static unsigned char row = 0;
|
||||
|
||||
//blank outputs of low-side (column) driver
|
||||
COLPORT |= _BV(TLC_PIN_BLANK);
|
||||
|
||||
//increment & wrap row counter
|
||||
if (++row == NUM_ROWS) row = 0;
|
||||
|
||||
// short delay loop, to ensure proper deactivation of the drivers
|
||||
for (i = 0; i < 10; i++) asm volatile("nop");
|
||||
|
||||
// row 0: initialize first shift register
|
||||
if (row == 0)
|
||||
{
|
||||
#ifndef INVERT_ROWS
|
||||
ROWPORT &= ~(1 << PIN_MCLR);
|
||||
ROWPORT |= (1 << PIN_MCLR);
|
||||
ROWPORT |= (1 << PIN_DATA);
|
||||
ROWPORT |= (1 << PIN_CLK);
|
||||
ROWPORT &= ~(1 << PIN_CLK);
|
||||
ROWPORT &= ~(1 << PIN_DATA);
|
||||
#else
|
||||
ROWPORT&= ~(1<<PIN_DATA);
|
||||
ROWPORT|= (1<<PIN_CLK);
|
||||
ROWPORT&= ~(1<<PIN_CLK);
|
||||
ROWPORT|= (1<<PIN_DATA);
|
||||
#endif
|
||||
}
|
||||
// remaining rows: just shift forward
|
||||
else
|
||||
{
|
||||
ROWPORT |= (1 << PIN_CLK);
|
||||
ROWPORT &= ~(1 << PIN_CLK);
|
||||
}
|
||||
|
||||
// another delay loop, to ensure that the drivers are ready
|
||||
for (i = 0; i < 20; i++) asm volatile("nop");
|
||||
}
|
||||
|
||||
// show a row
|
||||
/*
|
||||
static void rowshow(unsigned char row, unsigned char plane) {
|
||||
// depending on the currently drawn plane, display the row for a specific
|
||||
// amount of time
|
||||
static unsigned char const ocr_table[] = {3, 4, 22};
|
||||
OCR0 = ocr_table[plane];
|
||||
|
||||
// output data of the current row to the column drivers
|
||||
uint8_t tmp, tmp1;
|
||||
row = (row>>1) + ((row & 0x01)?8:0 );
|
||||
tmp = pixmap[plane][row][0];
|
||||
tmp1 = pixmap[plane][row][1];
|
||||
|
||||
#ifdef REVERSE_COLS
|
||||
tmp = (tmp >> 4) | (tmp << 4);
|
||||
tmp = ((tmp & 0xcc) >> 2) | ((tmp & 0x33)<< 2); //0xcc = 11001100, 0x33 = 00110011
|
||||
tmp = ((tmp & 0xaa) >> 1) | ((tmp & 0x55)<< 1); //0xaa = 10101010, 0x55 = 1010101
|
||||
COLPORT2 = tmp;
|
||||
tmp = tmp1;
|
||||
tmp = (tmp >> 4) | (tmp << 4);
|
||||
tmp = ((tmp & 0xcc) >> 2) | ((tmp & 0x33) << 2); //0xcc = 11001100, 0x33 = 00110011
|
||||
tmp = ((tmp & 0xaa) >> 1) | ((tmp & 0x55) << 1); //0xaa = 10101010, 0x55 = 1010101
|
||||
COLPORT1 = tmp;
|
||||
#else
|
||||
COLPORT1 = tmp;
|
||||
COLPORT2 = tmp1;
|
||||
#endif
|
||||
}
|
||||
*/
|
||||
|
||||
|
||||
// depending on the plane this interrupt triggers at 50 kHz, 31.25 kHz or
|
||||
// 12.5 kHz
|
||||
SIGNAL(SIG_OUTPUT_COMPARE0) {
|
||||
uint8_t i, x;
|
||||
|
||||
// reset watchdog
|
||||
wdt_reset();
|
||||
|
||||
// switch rows
|
||||
nextrow(row);
|
||||
|
||||
// output current row according to current plane
|
||||
//rowshow(row, plane);
|
||||
|
||||
//debug: load 100% duty cycle into column driver
|
||||
for(i = 0; i < 16; i++) //16 x 12bit
|
||||
{
|
||||
//shift in 12 bit words
|
||||
for(x = 0; x < 12; x++)
|
||||
{
|
||||
COLPORT &= ~_BV(TLC_PIN_SIN);
|
||||
COLPORT |= ((uint8_t)((uint16_t)0xFFF >> x) & 1) << TLC_PIN_SIN;
|
||||
SCLK();
|
||||
}
|
||||
}
|
||||
|
||||
//latch data and disable blanking
|
||||
XLAT();
|
||||
COLPORT &= ~_BV(TLC_PIN_BLANK);
|
||||
}
|
||||
|
||||
|
||||
void timer0_off() {
|
||||
cli();
|
||||
|
||||
COLPORT = 0;
|
||||
ROWPORT = 0;
|
||||
|
||||
#ifdef __AVR_ATmega644P__
|
||||
TCCR0A = 0x00;
|
||||
TCCR0B = 0x00;
|
||||
#else
|
||||
TCCR0 = 0x00;
|
||||
#endif
|
||||
|
||||
sei();
|
||||
}
|
||||
|
||||
|
||||
// initialize timer which triggers the interrupt
|
||||
static void timer0_on() {
|
||||
/* TCCR0: FOC0 WGM00 COM01 COM00 WGM01 CS02 CS01 CS00
|
||||
* CS02 CS01 CS00
|
||||
* 0 0 0 stop
|
||||
* 0 0 1 clk
|
||||
* 0 1 0 clk/8
|
||||
* 0 1 1 clk/64
|
||||
* 1 0 0 clk/256
|
||||
* 1 0 1 clk/1024
|
||||
*/
|
||||
|
||||
#ifdef __AVR_ATmega644P__
|
||||
TCCR0A = 0x02; // CTC Mode
|
||||
TCCR0B = 0x04; // clk/256
|
||||
TCNT0 = 0; // reset timer
|
||||
OCR0 = 20; // compare with this value
|
||||
TIMSK0 = 0x02; // compare match Interrupt on
|
||||
#else
|
||||
TCCR0 = 0x0C; // CTC Mode, clk/256
|
||||
TCNT0 = 0; // reset timer
|
||||
OCR0 = 20; // compare with this value
|
||||
TIMSK = 0x02; // compare match Interrupt on
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
void tlc5940_init()
|
||||
{
|
||||
uint8_t i;
|
||||
|
||||
//init control port pins
|
||||
COLDDR = 0x00;
|
||||
COLDDR = _BV(TLC_PIN_SCLK) | _BV(TLC_PIN_SIN)
|
||||
| _BV(TLC_PIN_XLAT) | _BV(TLC_PIN_BLANK)
|
||||
| _BV(TLC_PIN_VPRG) | _BV(TLC_PIN_DCPRG);
|
||||
|
||||
//switch off all outputs and pull-ups
|
||||
//xerr is open-drain, enable PUP
|
||||
//set blank flag (disable led-outputs)
|
||||
//dcprog is high -> use values from dc register
|
||||
//vprg is high -> dot correction mode mode
|
||||
COLPORT = _BV(TLC_PIN_XERR) | _BV(TLC_PIN_BLANK) | _BV(TLC_PIN_DCPRG) | _BV(TLC_PIN_VPRG);
|
||||
|
||||
//set max power (6bit * 16 LEDs)
|
||||
COLPORT |= _BV(TLC_PIN_SIN);
|
||||
for(i = 0; i < 96; i++) SCLK();
|
||||
XLAT();
|
||||
|
||||
//switch to grayscale mode
|
||||
COLPORT &= ~_BV(TLC_PIN_VPRG);
|
||||
|
||||
//flush input shift register (12bit * 16 LEDs)
|
||||
COLPORT &= ~_BV(TLC_PIN_SIN);
|
||||
for(i = 0; i < 192; i++) SCLK();
|
||||
XLAT();
|
||||
|
||||
//one extra clk pulse is needed after switching from dc mode
|
||||
SCLK();
|
||||
}
|
||||
|
||||
|
||||
void borg_hw_init() {
|
||||
//init column driver
|
||||
tlc5940_init();
|
||||
|
||||
// switch pins of the row port to output mode
|
||||
ROWDDR = (1 << PIN_MCLR) | (1 << PIN_CLK) | (1 << PIN_DATA);
|
||||
|
||||
// reset shift registers for the rows
|
||||
ROWPORT = 0;
|
||||
|
||||
//activate the activator
|
||||
timer0_on();
|
||||
|
||||
// activate watchdog timer
|
||||
wdt_reset();
|
||||
wdt_enable(0x00); // 17ms watchdog
|
||||
}
|
||||
Loading…
Reference in New Issue