fixed ram problem, made program working

schaltungen/displayboard_servo/software/Makefile

@@ -12,6 +12,9 @@
 
 MCU = attiny2313
 F_CPU = 8000000
+LFUSE = 0xe4
+HFUSE = 0xd9
+EFUSE = 0xff
 
 # Output format. (can be srec, ihex, binary)
 FORMAT = ihex
@@ -78,6 +81,7 @@ LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 AVRDUDE_PROGRAMMER = usbtiny
 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+AVRDUDE_FUSE = -U lfuse:w:$(LFUSE):m -U hfuse:w:$(HFUSE):m -U efuse:w:$(EFUSE):m 
 
 AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
 
@@ -184,6 +188,8 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
+fuse: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_FUSE)
 
 # Create final output files (.hex, .eep) from ELF output file.
 %.hex: %.elf

schaltungen/displayboard_servo/software/src/main.c

@@ -8,53 +8,87 @@
 #include "main.h"
 #include "uart.h"
 
-#define BUFSIZE 40
+
+#define BUFSIZE		32
 
 volatile uint16_t syscounter = 0;
 
 // values send over uart from powerboard
-uint16_t power_gen = 0;
+typedef struct {
-
+	uint16_t voltage_gen;
-unsigned char data_count = 0;
+	uint16_t voltage_reg;
-unsigned char data_in[BUFSIZE];
+	uint16_t current_gen;
-char command_in[BUFSIZE];
+	
+	struct {
+		uint8_t loadsw : 1;
+		uint8_t gensw : 1;
+		uint8_t batsw : 1;
+	};
+} PWR_DATA;
 
+static PWR_DATA pd;
 
+uint8_t data_count = 0;
+char data_in[BUFSIZE];
+extern unsigned char __heap_start;
+   
+   
 static void timer_init(void) {
 	// clock is 8MHz
 	TCCR1B |= _BV(WGM12) | _BV(CS11) | _BV(CS10);       // CTC Mode for Timer 1 (16Bit) with prescale of 64
     OCR1A = 2312;                           // Neutralposition ((2500-2312)*0.008ms)=1,5ms)
 	TIMSK = _BV(OCIE1A);
 	TCCR1A = (1<<COM1A0);                   // Togglen bei Compare Match
-
-    sei();	// enable interrupts
 }
 
 static void ports_init(void) {
 	DDRB |= _BV(PB3); 
 }
 
-static void process_command() {
+static void process_command(char *command) {
-    if(strstr(command_in,"A") != NULL) {
+	
-        // we have an A and B (from check in work_uart()
+    if(command[0] == 'A') {
-        // so our message should be complete and consist of:
+		// command must be in the following format:
-        // A$voltage,$current_in,$current_out,$power_in,$power_out,loadsw,dumpsw,gensw\n
+        // A$voltage_gen,$voltage_reg,$current_gen,loadsw,batsw,gensw\n
-
+        // examples: 
-        //A12.5,65464,00000,00000,00000,1,0,1B
+        //	A24500,13400,12000,1,1,1B
+        //	A19900,11000,15000,1,1,1B
+        //	A34100,15100,01000,1,1,1B
 
         char *token;
         uint8_t tokencounter = 0;
 
-        char *start = strrchr(command_in, 'A');
+        token = strtok(command, ","); 
-
+        
-        // remove first (B is ignored by atoi)
-        start++;
-
-        token = strtok(start, ",");
-
         while( token ) {
-            if (tokencounter == 3) {
+			/*uart_puts_P("\r\ntoken: ");
-                power_gen = atoi(token);
+			uart_puts(token);
+			
+			uart_puts_P("\r\ntokencounter: ");
+			uart_print_uint16(tokencounter);*/
+			
+            switch(tokencounter) {
+                case 0:
+                    pd.voltage_gen = atoi(++token);	// skip the A in front of the number
+                    break;
+                case 1:
+                    pd.voltage_reg = atoi(token);
+                    break;
+                case 2:
+                    pd.current_gen = atoi(token);
+                    break;
+                case 3:
+                    if(atoi(token) == 1) pd.loadsw = 1;
+                    else pd.loadsw = 0;
+                    break;
+                case 4:
+                    if(atoi(token) == 1) pd.batsw = 1;
+                    else pd.batsw = 0;
+                    break;
+                case 5:
+                    if(atoi(token) == 1) pd.gensw = 1;
+                    else pd.gensw = 0;
+                    break;
             }
 
             tokencounter++;
@@ -65,66 +99,109 @@ static void process_command() {
 
 static void work_uart() {
 
-    uint8_t c = uart_getc();
+    uint16_t c = uart_getc();
 
     if ( !(c & UART_NO_DATA) ) {
-        data_in[data_count] = c;
+		
+		data_in[data_count] = (c & 0xff);
+		
+		/*
+		uart_print_uint16(data_count);
+		uart_puts_P(" char: ");
+		uart_putc(c >> 8);
+		uart_putc(c & 0xff);
+		uart_puts_P(";\r\n");
+		*/
+		/*
+		uart_puts_P("data: ");
+		
+		for(uint8_t i = 0; i < BUFSIZE; i++) {
+			uart_putc(data_in[i]);
+		}
+		uart_puts_P("\r\n");
+		*/
 
         if (data_in[data_count] == 'B') {
+			//uart_puts_P("got b\r\n");
+            
+            process_command(data_in);
+            
             data_count = 0;
-
-            memcpy(command_in, data_in, BUFSIZE);
             memset(data_in, 0, BUFSIZE);
-
+        } 
-            process_command();
+        
-        } else {
+        data_count++;
-            data_count++;
+		if(data_count >= BUFSIZE) {
-        }
+			data_count = 0;
+			memset(data_in, 0, BUFSIZE);
+			//uart_puts_P("overflow\r\n");
+		}
+        
     }
+
+
 }
 
 static void set_servo(uint16_t display) {
 
-    display = display * 10;     // shift, since we have to divide by 3,2 (32)
+	if( display < 1 ) display = 1;
+	if( display > 400 ) display = 400;
+
+    display = display * 10;   // shift, since we have to divide by 3,2 (32)
     display = display / 32;   // instead of dividing by 3,2
     display = display + 125;
 
 	cli();		// read and write atomic
+	if( display < 125 ) display = 125;
+	if( display > 250 ) display = 250;
     OCR1A = 2500-display;
-    sei();
+    sei();    
-    
 }
 
 
 static void demo_display(void) {
-	for(uint8_t i = 0; i< 40;i++) {
+	for(uint16_t i = 0; i<= 40;i++) {
 		set_servo(i*10);
-		wait(5);
+		_delay_ms(50);
 	}
-
+	for(uint16_t i = 40; i> 0;i--) {
-	for(uint8_t i = 40; i> 0;i--) {
 		set_servo(i*10);
-		wait(5);
+		_delay_ms(50);
-    }
+	}
-
 }
 
-int main(void) {
 
+int main(void) {
+	sei();
 	ports_init();
 	timer_init();
-    uart_init(UART_BAUD_SELECT(19200,F_CPU));
+    uart_init(UART_BAUD_SELECT(38400,F_CPU));
     memset(data_in, 0, BUFSIZE);
-
+    
 	demo_display();
 
 	while(1) {
+		
 	    work_uart();
 
-        if(syscounter >= 10) {
+        if(syscounter >= 100) {
+			memset(data_in, 0, BUFSIZE);
+			data_count = 0;
             uart_putc('a'); // send a to receive values
-
+			
-            set_servo(power_gen);
+			//uart_puts_P("RAM="); uart_print_uint16(SP - (uint16_t) &__heap_start); uart_puts_P("\r\n");
+            
+            set_servo((pd.voltage_gen/1000) * (pd.current_gen/1000));
+            
+            /*
+            uart_puts_P("voltage_gen = ");
+            uart_print_voltage(pd.voltage_gen);
+            uart_puts_P(" voltage_reg = ");
+            uart_print_voltage(pd.voltage_reg);
+            uart_puts_P(" current_gen = ");
+            uart_print_current(pd.current_gen);
+            uart_puts_P("\r\n");
+            */
             syscounter = 0;
         }
 	}
@@ -134,10 +211,9 @@ int main(void) {
 
 SIGNAL(TIMER1_COMPA_vect) {
 	syscounter++;
-
     OCR1A = 2500-OCR1A;         // Das Servosignal wird aus der Differenz von
                                 // Periodenlänge (2500*0,008ms=20ms) und letztem
-                                // Vergleichswert (OCR1A) gebildet
+                                // Vergleichswert (OCR1A) gebildet	
 }
 
 

schaltungen/displayboard_servo/software/src/uart.h

@@ -76,7 +76,7 @@ LICENSE:
 #endif
 /** Size of the circular transmit buffer, must be power of 2 */
 #ifndef UART_TX_BUFFER_SIZE
-#define UART_TX_BUFFER_SIZE 32
+#define UART_TX_BUFFER_SIZE 8
 #endif
 
 /* test if the size of the circular buffers fits into SRAM */

schaltungen/displayboard_servo/software/src/utils.c

@@ -15,6 +15,18 @@ void uart_print_voltage(uint16_t x) {
     uart_putc(48 + (x % 10000 /1000));
     uart_putc('.');
     uart_putc(48 + (x % 1000 / 100 ));
+    uart_putc(48 + (x % 100 / 10 ));
+    //uart_putc(48 + (x % 10));
+    uart_putc('V');
+}
+
+void uart_print_current(uint16_t x) {
+    uart_putc(48 + (x / 10000));
+    uart_putc(48 + (x % 10000 /1000));
+    uart_putc('.');
+    uart_putc(48 + (x % 1000 / 100 ));
+    uart_putc(48 + (x % 100 / 10 ));
+    uart_putc('A');
     //uart_putc(48 + (x % 100 / 10 ));
     //uart_putc(48 + (x % 10));
 }

schaltungen/displayboard_servo/software/src/utils.h

@@ -3,6 +3,7 @@
 
 	extern void wait(uint8_t count);
 	extern void uart_print_voltage(uint16_t);
+	extern void uart_print_current(uint16_t);
 	extern void uart_print_int16(int16_t);
 	extern void uart_print_uint16(uint16_t);