Bart Van Der Meerssche
|
7fba026ddb
|
[spid + fsync] add support for commit command
|
2011-02-12 12:36:53 +01:00 |
|
Bart Van Der Meerssche
|
849c671175
|
[spid] set SPI_TX_RX_DELAY_NS to 10ms, down from 100ms
|
2011-02-12 11:47:31 +01:00 |
|
Bart Van Der Meerssche
|
cbc7949d95
|
[openwrt] add init.d script to flukso package
|
2011-02-03 12:28:36 +01:00 |
|
Bart Van Der Meerssche
|
9e8b7680b6
|
[restful] port local JSON/REST interface to v2
|
2011-02-03 12:27:24 +01:00 |
|
Bart Van Der Meerssche
|
b69a4d5bdd
|
[fluksod] fix bug in pulse logic
|
2011-02-03 12:25:52 +01:00 |
|
Bart Van Der Meerssche
|
8b7cc4510a
|
[busybox] enable ip command for use in horst shell script
|
2011-02-03 12:23:00 +01:00 |
|
Bart Van Der Meerssche
|
8d2ccb8979
|
[avrdude] patch avrdude to work with inverted logic on RST and SCK lines
|
2011-02-03 12:21:44 +01:00 |
|
Bart Van Der Meerssche
|
a1b981e4f8
|
[avr] switch avr to SPI mode 2 (inverted SCK) for new level-shifer
|
2011-02-03 12:20:24 +01:00 |
|
Bart Van Der Meerssche
|
f99ea292ff
|
[avr] write sensor data to EEPROM when power-loss is detected
|
2011-02-03 12:17:33 +01:00 |
|
Bart Van Der Meerssche
|
e842040395
|
[avr + avrdude] switching to m168p hardware
|
2011-02-03 12:15:41 +01:00 |
|
Bart Van Der Meerssche
|
893cb4f446
|
[fluksod] port remaining coroutines to v2
|
2011-01-30 22:57:37 +01:00 |
|
Bart Van Der Meerssche
|
17b8137e3d
|
[fluksod] add wan and lan buffer coroutines
|
2011-01-30 17:21:31 +01:00 |
|
Bart Van Der Meerssche
|
99aee26dba
|
[fluksod] first commit for the born-again fluksod
|
2011-01-30 11:52:35 +01:00 |
|
Bart Van Der Meerssche
|
884a7d859a
|
[spid + fsync] change CTRL and DAEMON paths to point to spid
|
2011-01-30 10:18:19 +01:00 |
|
Bart Van Der Meerssche
|
069a8540b0
|
[luci] backport json decode/encode string functions from 0.10
|
2011-01-29 19:53:41 +01:00 |
|
Bart Van Der Meerssche
|
23b47bd955
|
[avr + fsync] check against MAX_ANALOG_SENSOR
|
2011-01-28 21:28:43 +01:00 |
|
Bart Van Der Meerssche
|
13fad26051
|
[avr] add macro ENABLED(x) and STATE_POWER_LOCK
|
2011-01-28 20:53:18 +01:00 |
|
Bart Van Der Meerssche
|
55ecdd3451
|
[fsync] enable/disable cmd works on sensors, not on ports
|
2011-01-28 20:38:19 +01:00 |
|
Bart Van Der Meerssche
|
035bc2d4fe
|
[avr] cmd parameter checking for enable/disable
|
2011-01-28 16:30:50 +01:00 |
|
Bart Van Der Meerssche
|
3cff549f8c
|
[fsync] print clearly that a config error has occurred
|
2011-01-28 14:48:56 +01:00 |
|
Bart Van Der Meerssche
|
8ff7770f0a
|
[fsync] add port numbering check for phy_to_log
|
2011-01-28 14:43:55 +01:00 |
|
Bart Van Der Meerssche
|
688df77ffa
|
[fsync] add an enable option to each sensor in the uci file
|
2011-01-28 12:51:10 +01:00 |
|
Bart Van Der Meerssche
|
cf5af8ec0b
|
[fsync] include copyright header
|
2011-01-28 11:17:21 +01:00 |
|
Bart Van Der Meerssche
|
62f36ce02d
|
[avr] add cmd check on sensor id
|
2011-01-28 10:57:26 +01:00 |
|
Bart Van Der Meerssche
|
9fbbb99a88
|
[avr] check state flags in main loop for all sensors
|
2011-01-28 10:45:50 +01:00 |
|
Bart Van Der Meerssche
|
d870088415
|
[fluksod] improved message arg checking
|
2011-01-28 10:41:55 +01:00 |
|
Bart Van Der Meerssche
|
fd51388300
|
[fluksod] create empty table for arg when not called from the Lua interpreter
|
2011-01-28 10:14:17 +01:00 |
|
Bart Van Der Meerssche
|
4e4f4a8f88
|
[fsync] first implementation of fsync command: pushes the flukso uci config to the sensor board
|
2011-01-27 10:46:29 +01:00 |
|
Bart Van Der Meerssche
|
78b1ec3be3
|
[avr + fluksod] add per-port enable/disable commands
|
2011-01-26 14:08:46 +01:00 |
|
Bart Van Der Meerssche
|
112661303d
|
[avr] add debugging to INT{0,1} ISRs
|
2011-01-25 20:51:08 +01:00 |
|
Bart Van Der Meerssche
|
33cffa6b79
|
[fluksod] -d switch will put fluksod.lua in debugging mode
|
2011-01-25 15:10:18 +01:00 |
|
Bart Van Der Meerssche
|
3d41fba408
|
[fluksod] encode/decode all sensor board commands
|
2011-01-25 14:54:40 +01:00 |
|
Bart Van Der Meerssche
|
6084528217
|
[fluksod] enclose dbg.vardump in a DEBUG switch
|
2011-01-25 10:32:47 +01:00 |
|
Bart Van Der Meerssche
|
769df42192
|
[openwrt] add 990-add_timerfd_support.patch to install script
|
2011-01-25 10:19:36 +01:00 |
|
Bart Van Der Meerssche
|
c2c2dd051b
|
[fluksod] set msg.received.{l,u} to nil when equal to empty string
|
2011-01-25 10:09:55 +01:00 |
|
Bart Van Der Meerssche
|
fc1f955b51
|
[avr] set commands should repeat the params in the reply
|
2011-01-24 22:16:48 +01:00 |
|
Bart Van Der Meerssche
|
5dcac14c60
|
[avr] change SPI definitions to hex values
|
2011-01-24 22:14:48 +01:00 |
|
Bart Van Der Meerssche
|
8d28890acb
|
[fluksod] return timestamp as first part of the delta reply
|
2011-01-24 18:53:51 +01:00 |
|
Bart Van Der Meerssche
|
728ac3e059
|
[nixio] enclose numexp with a __linux__ switch
|
2011-01-24 15:42:38 +01:00 |
|
Bart Van Der Meerssche
|
c754127df2
|
[fluksod] set up a timerfd to poll the sensor board periodically
|
2011-01-24 14:40:52 +01:00 |
|
Bart Van Der Meerssche
|
3da4eee152
|
[nixio] add timerfd and numexp functions to get timer notifications via fds
|
2011-01-24 14:15:30 +01:00 |
|
Bart Van Der Meerssche
|
abaefa00ad
|
[uClibc] include linux-specific timerfd syscalls
|
2011-01-24 14:11:27 +01:00 |
|
Bart Van Der Meerssche
|
3cc10bde7d
|
[nixio] clean up compiler warnings
|
2011-01-24 13:34:30 +01:00 |
|
Bart Van Der Meerssche
|
528a121b2e
|
[nixio]: add a setitimerfd function to the library
|
2011-01-24 10:50:27 +01:00 |
|
Bart Van Der Meerssche
|
d7a4425662
|
[openwrt] add luaprofiler and ucitrigger packages to the build
|
2011-01-24 10:46:22 +01:00 |
|
Bart Van Der Meerssche
|
0ff4f20cfc
|
[fluksod] put an advisory lock on spidev
|
2011-01-22 00:07:01 +01:00 |
|
Bart Van Der Meerssche
|
2fa9a53766
|
[fluksod + nixio] add { ctrl, delta, uart } dispatching
|
2011-01-21 20:31:18 +01:00 |
|
Bart Van Der Meerssche
|
0d3f076b5f
|
[spidev + nixio + fluksod] allow the bitbanged spi max speed and inter-byte delay to be dynamically set from user space
|
2011-01-19 22:12:49 +01:00 |
|
Bart Van Der Meerssche
|
d208545000
|
[avr + fluksod] enable crc checking in both spi directions
|
2011-01-17 11:11:44 +01:00 |
|
Bart Van Der Meerssche
|
e282a750de
|
[avr] add comments to commands
|
2011-01-16 23:41:53 +01:00 |
|
Bart Van Der Meerssche
|
b641230fc8
|
[avr] add {hw,sw} {major,minor} sensor board versioning
|
2011-01-16 23:25:11 +01:00 |
|
Bart Van Der Meerssche
|
b2e7f486f9
|
[openwrt] add spi tuning patch to install script
|
2011-01-16 19:39:46 +01:00 |
|
Bart Van Der Meerssche
|
dedbb4daf6
|
[avr] add interrupt tracing to TIMER1 ISR
|
2011-01-16 17:32:21 +01:00 |
|
Bart Van Der Meerssche
|
8813c816ff
|
[avr] fix interrupt tracing and remove unneeded volatiles
|
2011-01-16 17:30:55 +01:00 |
|
Bart Van Der Meerssche
|
b224ffdf23
|
[avr] optimize btoh and htob for 8-bit uc
|
2011-01-16 12:00:41 +01:00 |
|
Bart Van Der Meerssche
|
0af40cf27d
|
[avr] couple the LED heartbeat to activity on the SPI bus
|
2011-01-16 10:44:48 +01:00 |
|
Bart Van Der Meerssche
|
9c47f71514
|
[avr] inline htob and btoh functions
|
2011-01-15 23:30:59 +01:00 |
|
Bart Van Der Meerssche
|
65db2fe1dd
|
[avr] add debug macros for tracing interrupts
|
2011-01-15 23:06:48 +01:00 |
|
Bart Van Der Meerssche
|
f74b124884
|
[avr] add DOW CRC8 function and add the checksum to a ctrl message
|
2011-01-15 23:03:16 +01:00 |
|
Bart Van Der Meerssche
|
968e25c863
|
[fluksod] spi half-duplex logic is now handled in the kernel driver
|
2011-01-15 19:56:40 +01:00 |
|
Bart Van Der Meerssche
|
f033d465ad
|
[spidev] tune the spi bitbanging driver for interaction with an AVR slave
|
2011-01-15 10:27:58 +01:00 |
|
Bart Van Der Meerssche
|
d3dd4366da
|
[fluksod] implement spi read operation in C
|
2011-01-11 09:24:29 +01:00 |
|
Bart Van Der Meerssche
|
aa412d1dc4
|
[nixio] implement hextonum and numtohex in C
|
2011-01-10 14:50:10 +01:00 |
|
Bart Van Der Meerssche
|
7c3ad70ff2
|
[nixio] implement dow_crc8 in C
|
2011-01-10 01:22:20 +01:00 |
|
Bart Van Der Meerssche
|
d60e749873
|
[openwrt] add the luaprofiler package
|
2011-01-09 22:18:50 +01:00 |
|
Bart Van Der Meerssche
|
3298f30ead
|
[fluksod] compile luad against the gnu99 standard
|
2011-01-09 19:57:22 +01:00 |
|
Bart Van Der Meerssche
|
9a27a1f22d
|
[fluksod] chmod 666 /dev/spidev0.0 in rc.local
|
2011-01-09 14:01:37 +01:00 |
|
Bart Van Der Meerssche
|
f3516415bd
|
[fluksod] skeleton implementation of message processing on spidev bus
|
2011-01-09 12:00:50 +01:00 |
|
Bart Van Der Meerssche
|
221636f5cf
|
openwrt: luad is a libdaemon-based generic daemonization framework for Lua code
|
2011-01-07 14:41:46 +01:00 |
|
Bart Van Der Meerssche
|
3e258f13f8
|
openwrt: add flukso as a user/group
|
2011-01-05 20:58:27 +01:00 |
|
Bart Van Der Meerssche
|
619b6e0436
|
openwrt: add 120-add_gettimeofday.patch to luci/patches
|
2010-12-30 23:34:01 +01:00 |
|
Bart Van Der Meerssche
|
0dc94a5994
|
openwrt: add gettimeofday to nixio library
|
2010-12-30 23:33:01 +01:00 |
|
Bart Van Der Meerssche
|
b0fd16364e
|
avr: add version field and s/gv [set/get version] command
|
2010-12-29 21:45:41 +01:00 |
|
Bart Van Der Meerssche
|
21984e237a
|
avr: port INT0 and INT1 ISRs to flukso v2
|
2010-12-29 17:43:17 +01:00 |
|
Bart Van Der Meerssche
|
db42f36f91
|
avr: return an [e]rror in case of an unrecognized command
|
2010-12-29 16:22:01 +01:00 |
|
Bart Van Der Meerssche
|
20a13be0d3
|
avr: flush the ctrl Tx buffer when decoding a new command
|
2010-12-29 15:29:31 +01:00 |
|
Bart Van Der Meerssche
|
9c5842f262
|
avr: adapt scaling factor in power calc to increased sampling freq [667Hz]
|
2010-12-29 15:28:43 +01:00 |
|
Bart Van Der Meerssche
|
d80377ee19
|
avr: set up the ADC with bandgap as a reference
|
2010-12-29 14:08:20 +01:00 |
|
Bart Van Der Meerssche
|
381e235af3
|
avr: port analog input sampling + power calculation and implement gd [get delta] command
|
2010-12-28 23:23:16 +01:00 |
|
Bart Van Der Meerssche
|
b63f36cba0
|
avr: move SPI_... defs to header file, change value into counter name
|
2010-12-28 14:34:56 +01:00 |
|
Bart Van Der Meerssche
|
263d3d107a
|
avr: prevent race conditions when getting/setting parameters
|
2010-12-28 00:34:50 +01:00 |
|
Bart Van Der Meerssche
|
1ada193cea
|
avr: implement g/sw [get/set watchdog time-out events] and g/sb [get/set brown-out events]
|
2010-12-27 23:23:15 +01:00 |
|
Bart Van Der Meerssche
|
3d1b67f221
|
avr: implement gm [get meterconst] and sm [set meterconst] commands
|
2010-12-27 23:12:52 +01:00 |
|
Bart Van Der Meerssche
|
80ae936348
|
avr: implement gv [get value] and sv [set value] commands
|
2010-12-27 23:04:55 +01:00 |
|
Bart Van Der Meerssche
|
98496e442d
|
avr: implement char/short/long read and write functions from/to ctrl buffer
|
2010-12-27 21:39:55 +01:00 |
|
Bart Van Der Meerssche
|
01863a6594
|
avr: implement the ct [commit] command
|
2010-12-26 22:30:51 +01:00 |
|
Bart Van Der Meerssche
|
90645f81c2
|
avr: implement sp [set phy-to-logical] command
|
2010-12-26 19:54:15 +01:00 |
|
Bart Van Der Meerssche
|
2e6336b0f8
|
avr: remove hex encoding for ctrl messages
|
2010-12-26 19:31:59 +01:00 |
|
Bart Van Der Meerssche
|
6f377bdc53
|
avr: implement the gp [get phy-to-logical] command
|
2010-12-26 19:03:22 +01:00 |
|
Bart Van Der Meerssche
|
d0dfd67d30
|
openwrt: include kmod-spi-gpio
|
2010-12-26 12:14:10 +01:00 |
|
Bart Van Der Meerssche
|
17456428dd
|
openwrt: prettify the install script output
|
2010-12-24 10:56:35 +01:00 |
|
Bart Van Der Meerssche
|
af6a4d20ce
|
openwrt: add rrdtool 1.0.x to the build
|
2010-12-21 22:06:02 +01:00 |
|
Bart Van Der Meerssche
|
05bb8a88d3
|
openwrt: select avrdude package for inclusion in flukso v2 image
|
2010-12-21 21:49:23 +01:00 |
|
Bart Van Der Meerssche
|
2c8f97aadb
|
openwrt: swap MOSI and MISO pins on bitbanged SPI
|
2010-12-20 13:23:51 +01:00 |
|
Bart Van Der Meerssche
|
1a9ada411f
|
openwrt: clean up luci nixio tls and unix domain socket patches and apply them to luci 0.9
|
2010-12-19 21:17:16 +01:00 |
|
Bart Van Der Meerssche
|
6fe1376501
|
openwrt: port install shell script to flukso v2
|
2010-12-19 21:01:24 +01:00 |
|
Bart Van Der Meerssche
|
f5d4df2b2a
|
openwrt: port .config file with enabled kmod-spi-bitbang and kmod-spi-dev for flukso v2
|
2010-12-19 21:00:43 +01:00 |
|
Bart Van Der Meerssche
|
4652104d5c
|
openwrt: flush outdated patches in flukso v2
|
2010-12-19 20:58:01 +01:00 |
|
Bart Van Der Meerssche
|
c2e0d32a53
|
openwrt: port patches to flukso v2 and update numbering scheme
|
2010-12-19 20:55:18 +01:00 |
|
Bart Van Der Meerssche
|
b99af29cbd
|
openwrt: port files dir to flukso v2
|
2010-12-19 20:53:54 +01:00 |