Bart Van Der Meerssche
|
6084528217
|
[fluksod] enclose dbg.vardump in a DEBUG switch
|
2011-01-25 10:32:47 +01:00 |
|
Bart Van Der Meerssche
|
769df42192
|
[openwrt] add 990-add_timerfd_support.patch to install script
|
2011-01-25 10:19:36 +01:00 |
|
Bart Van Der Meerssche
|
c2c2dd051b
|
[fluksod] set msg.received.{l,u} to nil when equal to empty string
|
2011-01-25 10:09:55 +01:00 |
|
Bart Van Der Meerssche
|
fc1f955b51
|
[avr] set commands should repeat the params in the reply
|
2011-01-24 22:16:48 +01:00 |
|
Bart Van Der Meerssche
|
5dcac14c60
|
[avr] change SPI definitions to hex values
|
2011-01-24 22:14:48 +01:00 |
|
Bart Van Der Meerssche
|
8d28890acb
|
[fluksod] return timestamp as first part of the delta reply
|
2011-01-24 18:53:51 +01:00 |
|
Bart Van Der Meerssche
|
728ac3e059
|
[nixio] enclose numexp with a __linux__ switch
|
2011-01-24 15:42:38 +01:00 |
|
Bart Van Der Meerssche
|
c754127df2
|
[fluksod] set up a timerfd to poll the sensor board periodically
|
2011-01-24 14:40:52 +01:00 |
|
Bart Van Der Meerssche
|
3da4eee152
|
[nixio] add timerfd and numexp functions to get timer notifications via fds
|
2011-01-24 14:15:30 +01:00 |
|
Bart Van Der Meerssche
|
abaefa00ad
|
[uClibc] include linux-specific timerfd syscalls
|
2011-01-24 14:11:27 +01:00 |
|
Bart Van Der Meerssche
|
3cc10bde7d
|
[nixio] clean up compiler warnings
|
2011-01-24 13:34:30 +01:00 |
|
Bart Van Der Meerssche
|
528a121b2e
|
[nixio]: add a setitimerfd function to the library
|
2011-01-24 10:50:27 +01:00 |
|
Bart Van Der Meerssche
|
d7a4425662
|
[openwrt] add luaprofiler and ucitrigger packages to the build
|
2011-01-24 10:46:22 +01:00 |
|
Bart Van Der Meerssche
|
0ff4f20cfc
|
[fluksod] put an advisory lock on spidev
|
2011-01-22 00:07:01 +01:00 |
|
Bart Van Der Meerssche
|
2fa9a53766
|
[fluksod + nixio] add { ctrl, delta, uart } dispatching
|
2011-01-21 20:31:18 +01:00 |
|
Bart Van Der Meerssche
|
0d3f076b5f
|
[spidev + nixio + fluksod] allow the bitbanged spi max speed and inter-byte delay to be dynamically set from user space
|
2011-01-19 22:12:49 +01:00 |
|
Bart Van Der Meerssche
|
d208545000
|
[avr + fluksod] enable crc checking in both spi directions
|
2011-01-17 11:11:44 +01:00 |
|
Bart Van Der Meerssche
|
e282a750de
|
[avr] add comments to commands
|
2011-01-16 23:41:53 +01:00 |
|
Bart Van Der Meerssche
|
b641230fc8
|
[avr] add {hw,sw} {major,minor} sensor board versioning
|
2011-01-16 23:25:11 +01:00 |
|
Bart Van Der Meerssche
|
b2e7f486f9
|
[openwrt] add spi tuning patch to install script
|
2011-01-16 19:39:46 +01:00 |
|
Bart Van Der Meerssche
|
dedbb4daf6
|
[avr] add interrupt tracing to TIMER1 ISR
|
2011-01-16 17:32:21 +01:00 |
|
Bart Van Der Meerssche
|
8813c816ff
|
[avr] fix interrupt tracing and remove unneeded volatiles
|
2011-01-16 17:30:55 +01:00 |
|
Bart Van Der Meerssche
|
b224ffdf23
|
[avr] optimize btoh and htob for 8-bit uc
|
2011-01-16 12:00:41 +01:00 |
|
Bart Van Der Meerssche
|
0af40cf27d
|
[avr] couple the LED heartbeat to activity on the SPI bus
|
2011-01-16 10:44:48 +01:00 |
|
Bart Van Der Meerssche
|
9c47f71514
|
[avr] inline htob and btoh functions
|
2011-01-15 23:30:59 +01:00 |
|
Bart Van Der Meerssche
|
65db2fe1dd
|
[avr] add debug macros for tracing interrupts
|
2011-01-15 23:06:48 +01:00 |
|
Bart Van Der Meerssche
|
f74b124884
|
[avr] add DOW CRC8 function and add the checksum to a ctrl message
|
2011-01-15 23:03:16 +01:00 |
|
Bart Van Der Meerssche
|
968e25c863
|
[fluksod] spi half-duplex logic is now handled in the kernel driver
|
2011-01-15 19:56:40 +01:00 |
|
Bart Van Der Meerssche
|
f033d465ad
|
[spidev] tune the spi bitbanging driver for interaction with an AVR slave
|
2011-01-15 10:27:58 +01:00 |
|
Bart Van Der Meerssche
|
d3dd4366da
|
[fluksod] implement spi read operation in C
|
2011-01-11 09:24:29 +01:00 |
|
Bart Van Der Meerssche
|
aa412d1dc4
|
[nixio] implement hextonum and numtohex in C
|
2011-01-10 14:50:10 +01:00 |
|
Bart Van Der Meerssche
|
7c3ad70ff2
|
[nixio] implement dow_crc8 in C
|
2011-01-10 01:22:20 +01:00 |
|
Bart Van Der Meerssche
|
d60e749873
|
[openwrt] add the luaprofiler package
|
2011-01-09 22:18:50 +01:00 |
|
Bart Van Der Meerssche
|
3298f30ead
|
[fluksod] compile luad against the gnu99 standard
|
2011-01-09 19:57:22 +01:00 |
|
Bart Van Der Meerssche
|
9a27a1f22d
|
[fluksod] chmod 666 /dev/spidev0.0 in rc.local
|
2011-01-09 14:01:37 +01:00 |
|
Bart Van Der Meerssche
|
f3516415bd
|
[fluksod] skeleton implementation of message processing on spidev bus
|
2011-01-09 12:00:50 +01:00 |
|
Bart Van Der Meerssche
|
221636f5cf
|
openwrt: luad is a libdaemon-based generic daemonization framework for Lua code
|
2011-01-07 14:41:46 +01:00 |
|
Bart Van Der Meerssche
|
3e258f13f8
|
openwrt: add flukso as a user/group
|
2011-01-05 20:58:27 +01:00 |
|
Bart Van Der Meerssche
|
619b6e0436
|
openwrt: add 120-add_gettimeofday.patch to luci/patches
|
2010-12-30 23:34:01 +01:00 |
|
Bart Van Der Meerssche
|
0dc94a5994
|
openwrt: add gettimeofday to nixio library
|
2010-12-30 23:33:01 +01:00 |
|
Bart Van Der Meerssche
|
b0fd16364e
|
avr: add version field and s/gv [set/get version] command
|
2010-12-29 21:45:41 +01:00 |
|
Bart Van Der Meerssche
|
21984e237a
|
avr: port INT0 and INT1 ISRs to flukso v2
|
2010-12-29 17:43:17 +01:00 |
|
Bart Van Der Meerssche
|
db42f36f91
|
avr: return an [e]rror in case of an unrecognized command
|
2010-12-29 16:22:01 +01:00 |
|
Bart Van Der Meerssche
|
20a13be0d3
|
avr: flush the ctrl Tx buffer when decoding a new command
|
2010-12-29 15:29:31 +01:00 |
|
Bart Van Der Meerssche
|
9c5842f262
|
avr: adapt scaling factor in power calc to increased sampling freq [667Hz]
|
2010-12-29 15:28:43 +01:00 |
|
Bart Van Der Meerssche
|
d80377ee19
|
avr: set up the ADC with bandgap as a reference
|
2010-12-29 14:08:20 +01:00 |
|
Bart Van Der Meerssche
|
381e235af3
|
avr: port analog input sampling + power calculation and implement gd [get delta] command
|
2010-12-28 23:23:16 +01:00 |
|
Bart Van Der Meerssche
|
b63f36cba0
|
avr: move SPI_... defs to header file, change value into counter name
|
2010-12-28 14:34:56 +01:00 |
|
Bart Van Der Meerssche
|
263d3d107a
|
avr: prevent race conditions when getting/setting parameters
|
2010-12-28 00:34:50 +01:00 |
|
Bart Van Der Meerssche
|
1ada193cea
|
avr: implement g/sw [get/set watchdog time-out events] and g/sb [get/set brown-out events]
|
2010-12-27 23:23:15 +01:00 |
|
Bart Van Der Meerssche
|
3d1b67f221
|
avr: implement gm [get meterconst] and sm [set meterconst] commands
|
2010-12-27 23:12:52 +01:00 |
|
Bart Van Der Meerssche
|
80ae936348
|
avr: implement gv [get value] and sv [set value] commands
|
2010-12-27 23:04:55 +01:00 |
|
Bart Van Der Meerssche
|
98496e442d
|
avr: implement char/short/long read and write functions from/to ctrl buffer
|
2010-12-27 21:39:55 +01:00 |
|
Bart Van Der Meerssche
|
01863a6594
|
avr: implement the ct [commit] command
|
2010-12-26 22:30:51 +01:00 |
|
Bart Van Der Meerssche
|
90645f81c2
|
avr: implement sp [set phy-to-logical] command
|
2010-12-26 19:54:15 +01:00 |
|
Bart Van Der Meerssche
|
2e6336b0f8
|
avr: remove hex encoding for ctrl messages
|
2010-12-26 19:31:59 +01:00 |
|
Bart Van Der Meerssche
|
6f377bdc53
|
avr: implement the gp [get phy-to-logical] command
|
2010-12-26 19:03:22 +01:00 |
|
Bart Van Der Meerssche
|
d0dfd67d30
|
openwrt: include kmod-spi-gpio
|
2010-12-26 12:14:10 +01:00 |
|
Bart Van Der Meerssche
|
17456428dd
|
openwrt: prettify the install script output
|
2010-12-24 10:56:35 +01:00 |
|
Bart Van Der Meerssche
|
af6a4d20ce
|
openwrt: add rrdtool 1.0.x to the build
|
2010-12-21 22:06:02 +01:00 |
|
Bart Van Der Meerssche
|
05bb8a88d3
|
openwrt: select avrdude package for inclusion in flukso v2 image
|
2010-12-21 21:49:23 +01:00 |
|
Bart Van Der Meerssche
|
2c8f97aadb
|
openwrt: swap MOSI and MISO pins on bitbanged SPI
|
2010-12-20 13:23:51 +01:00 |
|
Bart Van Der Meerssche
|
1a9ada411f
|
openwrt: clean up luci nixio tls and unix domain socket patches and apply them to luci 0.9
|
2010-12-19 21:17:16 +01:00 |
|
Bart Van Der Meerssche
|
6fe1376501
|
openwrt: port install shell script to flukso v2
|
2010-12-19 21:01:24 +01:00 |
|
Bart Van Der Meerssche
|
f5d4df2b2a
|
openwrt: port .config file with enabled kmod-spi-bitbang and kmod-spi-dev for flukso v2
|
2010-12-19 21:00:43 +01:00 |
|
Bart Van Der Meerssche
|
4652104d5c
|
openwrt: flush outdated patches in flukso v2
|
2010-12-19 20:58:01 +01:00 |
|
Bart Van Der Meerssche
|
c2e0d32a53
|
openwrt: port patches to flukso v2 and update numbering scheme
|
2010-12-19 20:55:18 +01:00 |
|
Bart Van Der Meerssche
|
b99af29cbd
|
openwrt: port files dir to flukso v2
|
2010-12-19 20:53:54 +01:00 |
|
Bart Van Der Meerssche
|
b12a52ae87
|
openwrt: port avahi plus dependencies [expat, gdbm, intltool, libdaemon] to flukso v2
|
2010-12-19 20:50:47 +01:00 |
|
Bart Van Der Meerssche
|
fbfc451971
|
openwrt: port customized LuCI 0.9 package to flukso v2
|
2010-12-19 20:47:20 +01:00 |
|
Bart Van Der Meerssche
|
c44b378450
|
eagle: clean up PCB layout for sensor board, shorten current paths for decoupling capacitors
|
2010-12-04 10:14:54 +01:00 |
|
Bart Van Der Meerssche
|
164300276f
|
Merge branch 'develop' of github.com:icarus75/flukso into develop
|
2010-12-03 22:38:43 +01:00 |
|
Bart Van Der Meerssche
|
76b5ef7a3d
|
openwrt: update the installation instructions for a Backfire tailored to Flukso platforms
|
2010-12-03 22:04:37 +01:00 |
|
Bart Van Der Meerssche
|
a97b135c99
|
eagle: swap LED and AR_TXO pins, relocate a couple of GND vias
|
2010-11-29 11:17:32 +01:00 |
|
Bart Van Der Meerssche
|
d3cb9618f7
|
avr: replace quad nand with hex inverter for level shifting
|
2010-11-12 14:05:55 +01:00 |
|
Bart Van Der Meerssche
|
c058f0e896
|
openwrt: increase SPI clk speed to 16kHz
|
2010-11-12 10:39:24 +01:00 |
|
Bart Van Der Meerssche
|
558d74d352
|
avr: include analog comparator and pulse input code into basiciotest
|
2010-11-12 10:36:59 +01:00 |
|
Bart Van Der Meerssche
|
66e2cebf10
|
openwrt: avrdude does not like GPIO0 in its pin definitions, this patch spreads the GPIO0 love
|
2010-11-05 21:26:27 +01:00 |
|
Bart Van Der Meerssche
|
54e38ad77e
|
openwrt: adapt the avrdude rst/sck/mosi/miso gpio pin mapping for Dragino
|
2010-11-05 21:23:56 +01:00 |
|
Bart Van Der Meerssche
|
9130c5294f
|
openwrt: change the SPI GPIO pin mapping to work for Dragino
|
2010-11-05 21:22:03 +01:00 |
|
Bart Van Der Meerssche
|
4d5a3a2a39
|
avr: improve the L2/L3 protocol on the SPI interface
|
2010-10-16 21:39:35 +02:00 |
|
Bart Van Der Meerssche
|
0e2405b496
|
avr: customize makefile for v2 sensor board (atmega168 @3.69Mhz) and add make rprogram command for remote programming through avrdude
|
2010-10-16 21:28:58 +02:00 |
|
Bart Van Der Meerssche
|
56848df315
|
avr: add ctrl Rx and Tx buffer functions
|
2010-10-16 21:25:57 +02:00 |
|
Bart Van Der Meerssche
|
04e4a6cc99
|
openwrt: clean up the button Makefile
|
2010-10-13 11:08:23 +02:00 |
|
Bart Van Der Meerssche
|
c0543f206d
|
avr: allow 32-bit meterconstants for pulse inputs
|
2010-10-13 11:07:51 +02:00 |
|
Bart Van Der Meerssche
|
c8e1cd6975
|
openwrt: add multiple sensors to avahi config file
|
2010-10-13 10:28:37 +02:00 |
|
Bart Van Der Meerssche
|
23b3b2f83e
|
openwrt: add button package to v1 backfire build
|
2010-10-13 00:12:33 +02:00 |
|
Bart Van Der Meerssche
|
e5e352d5ca
|
avr: make pulse constant and half parameters configurable per input
|
2010-10-10 20:06:11 +02:00 |
|
Bart Van Der Meerssche
|
8f1836e8b8
|
openwrt: add avahi support plus dependencies
|
2010-10-05 00:10:48 +02:00 |
|
Bart Van Der Meerssche
|
850cb3d307
|
openwrt: Switching from lucid to uhttpd. The restful.lua CGI script has been kept sober on purpose to boost performance. The RESTful API can now handle 10 calls/s.
|
2010-10-05 00:05:50 +02:00 |
|
Bart Van Der Meerssche
|
23ad638752
|
openwrt: enable avahi/bonjour
|
2010-10-03 21:22:19 +02:00 |
|
Bart Van Der Meerssche
|
fe37a7f417
|
openwrt: localVersion should be 1.0
|
2010-10-03 21:12:40 +02:00 |
|
Bart Van Der Meerssche
|
332d3ef4e1
|
openwrt: nan should be string encoded
|
2010-10-03 21:12:01 +02:00 |
|
Bart Van Der Meerssche
|
f8a732c88b
|
openwrt: only keep the values within the last cutoff secs, not entries, and stuff the time series with nan
|
2010-10-01 20:05:05 +02:00 |
|
Bart Van Der Meerssche
|
1a2468dc20
|
openwrt: add jsonp support to local RESTful API
|
2010-10-01 19:28:08 +02:00 |
|
Bart Van Der Meerssche
|
47e2268abc
|
openwrt: add versioning to local RESTful API
|
2010-10-01 17:14:50 +02:00 |
|
Bart Van Der Meerssche
|
8de03f950f
|
openwrt: bump version to 111 to align with flukso daemon
|
2010-10-01 16:23:13 +02:00 |
|
Bart Van Der Meerssche
|
3d4c7dc5b2
|
openwrt: use Flukso UCI file as param input for heartbeat
|
2010-10-01 16:19:06 +02:00 |
|
Bart Van Der Meerssche
|
6889fa3594
|
openwrt: if msec decreased, just update the value in the table, but do not perform any calculations since the AVR might have gone through a reset
|
2010-10-01 15:43:51 +02:00 |
|
Bart Van Der Meerssche
|
099e00c8f6
|
openwrt: math.max converts int32 to float, use two > comparisons instead
|
2010-10-01 14:20:45 +02:00 |
|
Bart Van Der Meerssche
|
40ce61e4a6
|
openwrt: use uci file for setting daemon parameters
|
2010-09-30 14:34:39 +02:00 |
|
Bart Van Der Meerssche
|
57a0d071aa
|
openwrt: add a Flukso RESTful API to the lucid dispatcher
|
2010-09-29 16:42:21 +02:00 |
|
Bart Van Der Meerssche
|
536ac403a2
|
openwrt: introduce a UCI file to centralize Flukso params
|
2010-09-29 16:41:18 +02:00 |
|
Bart Van Der Meerssche
|
aaf1d86028
|
rm indexcache when stopping lucid
|
2010-09-29 14:34:23 +02:00 |
|
Bart Van Der Meerssche
|
1fb8df8e8b
|
openwrt: add a fluksorest LuciWebPublisher and restful daemon to lucid config file
|
2010-09-29 08:45:44 +02:00 |
|
Bart Van Der Meerssche
|
9a0240b5ca
|
openwrt: disable https in lucid & make webroot default location
|
2010-09-28 13:42:32 +02:00 |
|
Bart Van Der Meerssche
|
7463453a70
|
openwrt: comment out WPA[2]-EAP-specific part of the wifi form
|
2010-09-28 11:34:33 +02:00 |
|
Bart Van Der Meerssche
|
c7076a4acf
|
openwrt: disable WPA(2)-EAP modes
|
2010-09-27 23:59:04 +02:00 |
|
Bart Van Der Meerssche
|
d2cdc444d7
|
openwrt: remove encryption message on wifi page
|
2010-09-27 23:30:35 +02:00 |
|
Bart Van Der Meerssche
|
3cc27cb8ee
|
openwrt: load the nixio.fs module for using the readfile method later on
|
2010-09-27 21:57:01 +02:00 |
|
Bart Van Der Meerssche
|
66af3380ab
|
openwrt: make hostname non-editable on the system page
|
2010-09-27 20:21:52 +02:00 |
|
Bart Van Der Meerssche
|
d132f79529
|
openwrt: disable telnet client and daemon
|
2010-09-23 18:33:47 +02:00 |
|
Bart Van Der Meerssche
|
f82ee79cb3
|
openwrt: introduce shell script for setting up a flukso build environment
|
2010-09-23 17:38:49 +02:00 |
|
Bart Van Der Meerssche
|
f7db05a9e4
|
openwrt: enable the wifi led pin (= GPIO 4) in blinking mode
|
2010-09-23 17:32:31 +02:00 |
|
Bart Van Der Meerssche
|
65530970e4
|
openwrt: bump backfire to r23107 and disable rdate in busybox
|
2010-09-22 01:26:55 +02:00 |
|
Bart Van Der Meerssche
|
4aa9a2f632
|
openwrt: switch to backfire .config file
|
2010-09-21 19:49:00 +02:00 |
|
Bart Van Der Meerssche
|
575caca3d9
|
openwrt: custom init.d/network and sysctl.conf not required anymore
|
2010-09-21 19:47:49 +02:00 |
|
Bart Van Der Meerssche
|
afeea3e5f0
|
openwrt: configure /dev/ttyS0 with -echo -onlcr params
|
2010-09-20 21:01:46 +02:00 |
|
Bart Van Der Meerssche
|
a2e6ef8d9f
|
openwrt: bump ntpclient package version to 2007_365_4
|
2010-09-20 20:39:44 +02:00 |
|
Bart Van Der Meerssche
|
61e4a58b1d
|
openwrt: rename patches
|
2010-09-20 19:56:17 +02:00 |
|
Bart Van Der Meerssche
|
4f73acfa65
|
openwrt: adapt console patches for 2.6.30 kernel in backfire
|
2010-09-20 19:45:24 +02:00 |
|
Bart Van Der Meerssche
|
75517fa598
|
openwrt: set AR5315_RESET_GPIO to 6 in backfire
|
2010-09-20 19:37:59 +02:00 |
|
Bart Van Der Meerssche
|
dbd325d948
|
openwrt: add -std=c99 compile flag to luaxyssl makefile
|
2010-09-20 18:51:32 +02:00 |
|
Bart Van Der Meerssche
|
ba27080b4c
|
openwrt: include --std=c99 compile flag to luaexpat makefile
|
2010-09-20 17:34:41 +02:00 |
|
Bart Van Der Meerssche
|
266097d24f
|
openwrt: add stock openwrt luasocket package
|
2010-09-20 17:33:23 +02:00 |
|
Bart Van Der Meerssche
|
c45a953433
|
openwrt: remove custom luasocket package
|
2010-09-20 17:32:18 +02:00 |
|
Bart Van Der Meerssche
|
bca34157c7
|
openwrt: add flukso.ca.cert to files
|
2010-09-20 10:14:55 +02:00 |
|
Bart Van Der Meerssche
|
dec84822d5
|
openwrt: add LuCI 0.9 branch to the package repository with Flukso patches applied
|
2010-09-20 00:58:29 +02:00 |
|
Bart Van Der Meerssche
|
adbb953b1c
|
openwrt: remove LuCI 0.8.6 from the package repository
|
2010-09-20 00:56:50 +02:00 |
|
Bart Van Der Meerssche
|
e00f6a91ec
|
openwrt: remove the host directory within the LuCI package
|
2010-09-20 00:53:06 +02:00 |
|
Bart Van Der Meerssche
|
67e0594ae6
|
Merge branch 'develop' into bbh
|
2010-09-17 18:52:41 +02:00 |
|
Bart Van Der Meerssche
|
a6f3300ffc
|
openwrt: Lua allows 0xFFFFFFFF to overflow. Use decimal notation instead.
|
2010-09-10 12:01:56 +02:00 |
|
Bart Van Der Meerssche
|
8032327cc2
|
avr: add support for a configurable PULSE_CONST and PULSE_HALF
|
2010-09-10 10:16:35 +02:00 |
|
Bart Van Der Meerssche
|
09fd007bb2
|
openwrt: fill the power entries in reverse order which works perfectly with pulse interfaces
|
2010-09-09 22:07:02 +02:00 |
|
Bart Van Der Meerssche
|
4a7ae875ec
|
openwrt: index tables by x, not by the contents of the variable x
|
2010-09-09 22:04:32 +02:00 |
|
Bart Van Der Meerssche
|
ce102cfb54
|
openwrt: add support for pls xxx:yyy:zzz messages in the buffer coroutine
|
2010-09-09 19:36:49 +02:00 |
|
Bart Van Der Meerssche
|
61910f82ad
|
openwrt: make variables local in daemon dispatch loop
|
2010-09-09 15:29:27 +02:00 |
|
Bart Van Der Meerssche
|
8f4e7a17a2
|
openwrt: support pls xxx:yyy:zzz type messages with zzz = 32-bit millisec counter on the AVR
|
2010-09-09 15:28:53 +02:00 |
|
Bart Van Der Meerssche
|
fdc2e35e0f
|
avr: Improve the accuracy of pwr measurements and prevent an underflow condition in a boundary case by rounding down the multiplication constant. Thanks Mario!
|
2010-09-08 17:53:57 +02:00 |
|
Bart Van Der Meerssche
|
431fefa5f2
|
avr: add a ms timestamp to a pls message for pulse inputs
|
2010-09-04 19:44:54 +02:00 |
|
Bart Van Der Meerssche
|
8d1ccbc8fc
|
openwrt: better error checking and zombie process handling in rrdtool server
|
2010-09-03 11:50:58 +02:00 |
|
Bart Van Der Meerssche
|
41fa14cf61
|
openwrt: add an rrd.server module for connecting to rrdtool in pipe mode from Lua
|
2010-09-02 14:35:24 +02:00 |
|
Bart Van Der Meerssche
|
7856a4bb5e
|
openwrt: attach a wifi/eth toggle and return to network defaults to the reset button
|
2010-08-30 21:08:38 +02:00 |
|
Bart Van Der Meerssche
|
06318eea07
|
fix hotplug button timer bug in 2.6.30.10
|
2010-08-30 10:24:09 +02:00 |
|
Bart Van Der Meerssche
|
48f946e6aa
|
openwrt: allow unix domain sockets in nixio sendto and recvfrom
|
2010-08-11 20:50:22 +02:00 |
|
Bart Van Der Meerssche
|
505ce638f5
|
openwrt: add chipselect line to bitbanged SPI interface
|
2010-08-08 16:05:55 +02:00 |
|
Bart Van Der Meerssche
|
c8271f5fd0
|
openwrt: include LuCI nixio_tls_ctx_set_verify_locations method
|
2010-08-08 14:01:07 +02:00 |
|
Bart Van Der Meerssche
|
61851ad6b3
|
openwrt: include ntpclient package
|
2010-08-08 12:42:42 +02:00 |
|
Bart Van Der Meerssche
|
e508f18806
|
avr: include SPI_FORWARD_TO_CTRL_PORT source/destination routing tag
|
2010-08-07 23:29:15 +02:00 |
|
Bart Van Der Meerssche
|
ffcc35e107
|
openwrt: add .config file + luci and remote-update packages
|
2010-08-07 16:00:06 +02:00 |
|