starcalc
/
flm01
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

avr: customize makefile for v2 sensor board (atmega168 @3.69Mhz) and add make rprogram command for remote programming through avrdude

This commit is contained in:
Bart Van Der Meerssche 2010-10-16 21:28:58 +02:00
parent 56848df315
commit 0e2405b496
1 changed files with 23 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
mote/v2/avr/makefile
View File

@ -35,6 +35,9 @@
# make program = Download the hex file to the device, using avrdude. # make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first! # Please customize the avrdude settings below first!
# #
# make rprogram = Upload the hex and eep file to the Fluksometer's /tmp.
# Then flash the fuses, hex and eep through the onboard avrdude.
#
# make debug = Start either simulavr or avarice as specified for debugging, # make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging. # with avr-gdb or avr-insight as the front end for debugging.
# #
@ -48,7 +51,7 @@
# MCU name # MCU name
MCU = atmega48 MCU = atmega168
# Processor frequency. # Processor frequency.
@ -56,7 +59,7 @@ MCU = atmega48
# processor frequency. You can then use this symbol in your source code to # processor frequency. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code. # automatically to create a 32-bit value in your source code.
F_CPU = 1000000 F_CPU = 3686400
# Output format. (can be srec, ihex, binary) # Output format. (can be srec, ihex, binary)
@ -113,14 +116,14 @@ CSTANDARD = -std=gnu99
CDEFS = -DF_CPU=$(F_CPU)UL CDEFS = -DF_CPU=$(F_CPU)UL
# uncomment and adapt these line if you want different UART library buffer size # uncomment and adapt these line if you want different UART library buffer size
CDEFS += -DUART_RX_BUFFER_SIZE=32 CDEFS += -DUART_RX_BUFFER_SIZE=64
CDEFS += -DUART_TX_BUFFER_SIZE=32 CDEFS += -DUART_TX_BUFFER_SIZE=64
CDEFS += -DUART_DEFAULT_BAUD_RATE=4800 CDEFS += -DUART_DEFAULT_BAUD_RATE=115200
# override default CTRL buffer sizes # override default CTRL buffer sizes
CDEFS += -DCTRL_RX_BUFFER_SIZE=16 CDEFS += -DCTRL_RX_BUFFER_SIZE=32
CDEFS += -DCTRL_TX_BUFFER_SIZE=16 CDEFS += -DCTRL_TX_BUFFER_SIZE=32
# Place -I options here # Place -I options here
CINCS = CINCS =
@ -216,13 +219,14 @@ LDFLAGS += $(EXTMEMOPTS)
# to get a full listing. # to get a full listing.
# #
AVRDUDE_PROGRAMMER = usbtiny AVRDUDE_PROGRAMMER = usbtiny
AVRDUDE_PROGRAMMER_R = gpio
# com1 = serial port. Use lpt1 to connect to parallel port. # com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = /dev/ttyUSB* # programmer connected to serial device AVRDUDE_PORT = /dev/ttyUSB* # programmer connected to serial device
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
AVRDUDE_WRITE_FUSES = -U lfuse:w:0xEC:m -U hfuse:w:0xD6:m -U efuse:w:0x01:m
# Uncomment the following if you want avrdude's erase cycle counter. # Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn, # Note that this counter needs to be initialized first using -Yn,
@ -243,7 +247,10 @@ AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
AVRDUDE_FLAGS_R = -p $(MCU) -c $(AVRDUDE_PROGRAMMER_R)
AVRDUDE_FLAGS_R += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS_R += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS_R += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ---------------- #---------------- Debugging Options ----------------
@ -379,7 +386,12 @@ gccversion :
# Program the device. # Program the device.
program: $(TARGET).hex $(TARGET).eep program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FUSES) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
# Program the device remotely.
rprogram: $(TARGET).hex $(TARGET).eep
@scp $(TARGET).hex $(TARGET).eep root@192.168.255.1:/tmp
@ssh root@192.168.255.1 "cd /tmp; $(AVRDUDE) $(AVRDUDE_FLAGS_R) $(AVRDUDE_WRITE_FUSES) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)"
# Generate avr-gdb config/init file which does the following: # Generate avr-gdb config/init file which does the following:
@ -520,5 +532,5 @@ clean_list :
# Listing of phony targets. # Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \ .PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \ build elf hex eep lss sym coff extcoff \
clean clean_list program debug gdb-config clean clean_list program rprogram debug gdb-config