; PlatformIO Project Configuration File ; ; Build options: build flags, source filter ; Upload options: custom upload port, speed and extra flags ; Library options: dependencies, extra library storages ; Advanced options: extra scripting ; ; Please visit documentation for the other options and examples ; https://docs.platformio.org/page/projectconf.html # Flash upload with: pio run -t upload --environment sensorespx [platformio] #For Config upload comment in data_dir line and flash with: pio run -t uploadfs --environment sensorespx #data_dir=data_sensoresp0 #data_dir=data_sensoresp1 #data_dir=data_sensoresp2 #data_dir=data_sensoresp3 #data_dir=data_sensoresp4 #data_dir=data_sensoresp5 #data_dir=data_sensoresp6 data_dir=data_sensoresp7 #data_dir=data_sensoresp3dprinter #data_dir=data_sensoresptest #Outdoor [env:sensoresp0] platform = espressif8266 @ 2.5.0 #using old esp version, because of "obsolete API, use ::begin(WiFiClient, url)" error. Try again if fix available in platformio over vscode board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_BMP180 -D dataBMP180_temperature_minchange=0.5 -D dataBMP180_pressure_minchange=0.5 -D SENSOR_TCS34725 -D SENSOR_TCS34725_LUX_minchange=500 -D SENSOR_TCS34725_LUX_senddelaymax=1000*60*1 -D SENSOR_TCS34725_COLORTEMP_minchange=100 -D SENSOR_TCS34725_LUXFACTOR=0.3 #measured with luxmeter. with half tennis ball was 1.7ev less. 1/2^1.7=0,3078 #-D SENSOR_HS1101 #-D SENSOR_HS1101_PIN=D5 #-D SENSOR_HS1101_humidity_minchange=10 -D SENSOR_SHT31 -D SENSOR_SHT31_humidity_minchange=5 -D SENSOR_SHT31_temperature_minchange=0.5 -D SENSOR_ML8511 -D SENSOR_ML8511_PIN=A0 -D SENSOR_ML8511_minchange=0.2 -D SENSOR_ANEMOMETER -D SENSOR_Anemometer_PIN=D6 #Light Blue thicker cable (in distribution box) -D SENSOR_Anemometer_minchange=0.25 -D SENSOR_Anemometer_readdelay=1000*30 -D SENSOR_Anemometer_senddelaymax=1000*60*5 -D SENSOR_ANEMOMETER_PPMtoMPS=0.0208640462 # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal)) -D SENSOR_RAINGAUGE -D SENSOR_Raingauge_PIN=D7 -D RAINGAUGE_FLIPAMOUNT=0.29914 -D SENSOR_Raingauge_readdelay=1000 -D SENSOR_Raingauge_senddelaymax=1000*60*60 #also used for rain waiting timeout # Cable from Anemometer: Black=GND, Blue=3v3, Brown=Signal (needs pullup (internal)) #Cable colors from anemometers sensor (before longer able): blue=gnd, brown=vcc, white=signal lib_deps = Adafruit BMP085 Library@1.1.0 https://github.com/adafruit/Adafruit_TCS34725#1.3.5 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 adafruit/Adafruit SHT31 Library@^2.2.0 SPI #Arbeitszimmer [env:sensoresp1] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_DHT22 -D SENSOR_DHT22_PIN=D7 -D SENSOR_DHT22_temperature_minchange=0.2 -D SENSOR_DHT22_humidity_minchange=2.0 -D SENSOR_BMP180 -D dataBMP180_temperature_minchange=0.2 -D dataBMP180_pressure_minchange=0.5 -D SENSOR_HCSR501 -D SENSOR_HCSR501_PIN=D6 -D SENSOR_LDR -D SENSOR_LDR_CALIB_1 -D SENSOR_LDR_PIN=A0 -D SENSOR_LDR_minchange=10.0 -D SENSOR_LDR_senddelaymax=1000*60*1 lib_deps = Adafruit BMP085 Library@1.1.0 DHT sensor library@1.3.10 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 #Wohnzimmer Air Quality [env:sensoresp2] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_MHZ19B -D SENSOR_MHZ19B_SERIAL_RX=D5 -D SENSOR_MHZ19B_SERIAL_TX=D6 -D SENSOR_MHZ19B_minchange=10 -D SENSOR_MHZ19B_readdelay=10*1000 -D SENSOR_SDS018 -D SENSOR_SDS018_SERIAL_RX=D7 -D SENSOR_SDS018_SERIAL_TX=D8 -D SENSOR_SDS018_PM10_minchange=4 -D SENSOR_SDS018_PM25_minchange=4 lib_deps = klevytskyi/MHZ19@0.0.1 EspSoftwareSerial@6.8.1 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 #Wohnzimmer [env:sensoresp3] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_DHT22 -D SENSOR_DHT22_PIN=D7 -D SENSOR_DHT22_temperature_minchange=0.2 -D SENSOR_DHT22_humidity_minchange=1.0 -D SENSOR_HCSR501 -D SENSOR_HCSR501_PIN=D6 -D SENSOR_BH1750 -D dataBH1750_minchange=10.0 -D dataBH1750_senddelaymax=1000*60*2 lib_deps = adafruit/DHT sensor library@1.3.10 claws/BH1750@1.1.4 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 #Schlafzimmer [env:sensoresp4] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_DHT22 -D SENSOR_DHT22_PIN=D7 -D SENSOR_DHT22_temperature_minchange=0.2 -D SENSOR_DHT22_humidity_minchange=1.0 -D SENSOR_HCSR501 -D SENSOR_HCSR501_PIN=D0 -D SENSOR_BH1750 -D dataBH1750_minchange=10.0 -D dataBH1750_senddelaymax=1000*60*2 -D SENSOR_MHZ19B -D SENSOR_MHZ19B_SERIAL_RX=D5 -D SENSOR_MHZ19B_SERIAL_TX=D6 -D SENSOR_MHZ19B_minchange=10 -D SENSOR_MHZ19B_readdelay=10*1000 lib_deps = adafruit/DHT sensor library@1.3.10 claws/BH1750@1.1.4 klevytskyi/MHZ19@0.0.1 EspSoftwareSerial@6.8.1 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 #Kueche [env:sensoresp5] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino #monitor_port = /dev/ttyUSB0 monitor_port = COM3 monitor_speed = 115200 build_flags = -D SENSOR_DHT22 -D SENSOR_DHT22_PIN=D7 -D SENSOR_DHT22_temperature_minchange=0.2 -D SENSOR_DHT22_humidity_minchange=1.0 -D SENSOR_HCSR501 -D SENSOR_HCSR501_PIN=D6 -D SENSOR_RADAR -D SENSOR_RADAR_PIN=D5 -D SENSOR_RADAR_readdelay=100 -D SENSOR_RADAR_senddelaymax=1000*60*10 -D SENSOR_BH1750 -D dataBH1750_minchange=10.0 -D dataBH1750_senddelaymax=1000*60*2 -D SENSOR_VL53L1X -D SENSOR_VL53L1X_minchange=500 -D SENSOR_VL53L1X_senddelaymax=1000*30 -D SENSOR_VL53L1X_readdelay=500 lib_deps = adafruit/DHT sensor library@1.3.10 claws/BH1750@1.1.4 ArduinoJson@6.16.1 marvinroger/Homie @ ^3.0.1 pololu/VL53L1X @ ^1.3.0 #Flur Gas, motion, etc [env:sensoresp6] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_MULTICHANNELGASGMXXX -D SENSOR_MULTICHANNELGASGMXXX_no2_minchange=0.3 -D SENSOR_MULTICHANNELGASGMXXX_c2h5oh_minchange=0.3 -D SENSOR_MULTICHANNELGASGMXXX_voc_minchange=0.3 -D SENSOR_MULTICHANNELGASGMXXX_co_minchange=0.3 -D SENSOR_MULTICHANNELGASGMXXX_no2_senddelaymax=1000*60*60 -D SENSOR_MULTICHANNELGASGMXXX_c2h5oh_senddelaymax=1000*60*60 -D SENSOR_MULTICHANNELGASGMXXX_voc_senddelaymax=1000*60*60 -D SENSOR_MULTICHANNELGASGMXXX_co_senddelaymax=1000*60*60 -D SENSOR_HTU21D -D dataHTU21D_temperature_minchange=0.3 -D dataHTU21D_temperature_senddelaymax=1000*60*60 -D dataHTU21D_humidity_minchange=1.0 -D dataHTU21D_humidity_senddelaymax=1000*60*60 -D SENSOR_HCSR501 -D SENSOR_HCSR501_PIN=D6 -D SENSOR_BH1750 -D dataBH1750_minchange=10.0 -D dataBH1750_senddelaymax=1000*60*5 lib_deps = https://github.com/Seeed-Studio/Seeed_Arduino_MultiGas adafruit/Adafruit HTU21DF Library @ ^1.0.5 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 claws/BH1750@1.1.4 #Badezimmer [env:sensoresp7] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino #monitor_port = /dev/ttyUSB0 monitor_port = COM3 monitor_speed = 115200 build_flags = -D SENSOR_HCSR501 -D SENSOR_HCSR501_PIN=D6 -D SENSOR_VL53L1X -D SENSOR_VL53L1X_minchange=200 -D SENSOR_VL53L1X_senddelaymax=1000*30 -D SENSOR_VL53L1X_readdelay=500 -D SENSOR_HTU21D -D dataHTU21D_temperature_minchange=0.2 -D dataHTU21D_temperature_senddelaymax=1000*60*30 -D dataHTU21D_humidity_minchange=1.0 -D dataHTU21D_humidity_senddelaymax=1000*60*30 lib_deps = Bounce2 SPI ArduinoJson@6.16.1 marvinroger/Homie @ ^3.0.1 pololu/VL53L1X @ ^1.3.0 adafruit/Adafruit HTU21DF Library @ ^1.0.5 #3D Printer [env:sensoresp3dprinter] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_HTU21D -D dataHTU21D_temperature_minchange=0.1 -D dataHTU21D_temperature_senddelaymax=1000*60*60 -D dataHTU21D_humidity_minchange=1.0 -D dataHTU21D_humidity_senddelaymax=1000*60*60 lib_deps = adafruit/Adafruit HTU21DF Library @ ^1.0.5 ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 #Test [env:sensoresptest] platform = espressif8266 @ 2.5.0 board = d1_mini framework = arduino monitor_port = /dev/ttyUSB0 monitor_speed = 115200 build_flags = -D SENSOR_HTU21D -D dataHTU21D_temperature_minchange=0.2 -D dataHTU21D_temperature_senddelaymax=1000*60*30 -D dataHTU21D_humidity_minchange=1.0 -D dataHTU21D_humidity_senddelaymax=1000*60*30 -D SENSOR_TCS34725 -D SENSOR_TCS34725_LUX_minchange=500 -D SENSOR_TCS34725_LUX_senddelaymax=1000*60*1 -D SENSOR_TCS34725_COLORTEMP_minchange=100 -D SENSOR_TCS34725_LUXFACTOR=0.3 #measured with luxmeter. with half tennis ball was 1.7ev less. 1/2^1.7=0,3078 lib_deps = ArduinoJson@6.16.1 #dependency of homie. using older version because of "ambiguous overload for operator|" error Homie@3.0.0 adafruit/Adafruit HTU21DF Library @ ^1.0.5 https://github.com/adafruit/Adafruit_TCS34725#1.3.5