Browse Source

test calibration

master
interfisch 1 year ago
parent
commit
6849f8ca1c
  1. 63
      src/main.cpp

63
src/main.cpp

@ -11,18 +11,65 @@ HX711 scale;
void setup() {
Serial.begin(115200);
scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
//calibration
Serial.println("setup");
scale.set_scale(23805); //calibrated with 2.25kg weight
delay(500);
scale.tare();
delay(2000);
Serial.println("tared. measuring...");
//after this taring put known weight on scale and get value from scale.get_units(10). then devide this value by the weight and use this number for set_scale(NUMBER)
/*
Serial.println("Before setting up the scale:");
Serial.print("read: \t\t");
Serial.println(scale.read()); // print a raw reading from the ADC
Serial.print("read average: \t\t");
Serial.println(scale.read_average(20)); // print the average of 20 readings from the ADC
Serial.print("get value: \t\t");
Serial.println(scale.get_value(5)); // print the average of 5 readings from the ADC minus the tare weight (not set yet)
Serial.print("get units: \t\t");
Serial.println(scale.get_units(5), 1); // print the average of 5 readings from the ADC minus tare weight (not set) divided
// by the SCALE parameter (not set yet)
scale.set_scale(2280.f); // this value is obtained by calibrating the scale with known weights; see the README for details
scale.tare(); // reset the scale to 0
Serial.println("After setting up the scale:");
Serial.print("read: \t\t");
Serial.println(scale.read()); // print a raw reading from the ADC
Serial.print("read average: \t\t");
Serial.println(scale.read_average(20)); // print the average of 20 readings from the ADC
Serial.print("get value: \t\t");
Serial.println(scale.get_value(5)); // print the average of 5 readings from the ADC minus the tare weight, set with tare()
Serial.print("get units: \t\t");
Serial.println(scale.get_units(5), 1); // print the average of 5 readings from the ADC minus tare weight, divided
// by the SCALE parameter set with set_scale
Serial.println("Readings:");
*/
}
void loop() {
if (scale.wait_ready_retry(10)) {
long reading = scale.read();
Serial.print("HX711 reading: ");
Serial.println(reading);
} else {
Serial.println("HX711 not found.");
}
Serial.print("reading:\t");
Serial.println(scale.get_units(10));
delay(100);
delay(1500);
/*
scale.power_down(); // put the ADC in sleep mode
delay(5000);
scale.power_up();*/
}
Loading…
Cancel
Save