602d96264a
Merge gcopeland/constremove
2011-07-31 09:45:40 -07:00
0c2515df19
As a just in case I misunderstood some of the constant-ness changes, I
...
completely took out all of the constant correctness enahcements. Also
added a powerUp() method.
2011-07-19 11:05:18 -05:00
542c46c0c6
Merge branch 'p_enable' into constremove
2011-07-18 15:42:14 -05:00
158164746b
Adds explicit CRC width and PA level. Changes hardware initialization
...
order to minimize noisy/false message reception. Removed begin call
from constructor as begin now has delay which creates timer race
initialization. The delay exists to allow for power on/reset radio
settling which can otherwise prevent CONFIG bits from holding. Added a
method to allow CRC hardware validation to be disabled. This is a
requirement for various promiscuous listening RF applications. Setting
CRC width now forces CRC hardware validation enable.
2011-07-18 15:37:30 -05:00
85c0f57e3f
Removed method argument const qualifiers.
2011-07-16 11:36:10 -05:00
b491480dde
Reverted constructor changes. Changed SPI bus speed. Fixed setAutoAck
...
for specific pipelines per suggestion.
2011-07-16 10:36:36 -05:00
c13db8f42d
Added a second test configuration
2011-07-13 19:13:57 -07:00
1517f1249d
Fixed bug in setcrclength and setdatarate which was mishandling the bits
2011-07-13 19:13:32 -07:00
20e91ab82b
comments
2011-07-10 08:26:49 -07:00
42bf3e8cd2
Purge 'boolean' type, use 'bool' instead
2011-07-10 08:22:30 -07:00
ccf32891f0
comments
2011-07-10 08:18:41 -07:00
9566c82367
Clean up read() to use new-style read_register, which reduces it to two lines of code
2011-07-10 08:12:12 -07:00
63eb62ebc3
Implement dynamic payloads, with an example
2011-07-10 08:00:58 -07:00
32e8b3fbbb
astyle -A1 -s2
2011-07-08 22:29:16 -07:00
b000a87aa1
Optimization of whatHappened, suggested by Mike Denzien
2011-07-08 22:25:44 -07:00
d3fff68a7c
Created a non-blocking write and an example for how to use it.
2011-07-06 20:49:59 -07:00
fbae441249
Factored out status-checking from write() into a public method
2011-07-06 19:51:30 -07:00
c62224ff86
More comments, factored out powerdown from write()
2011-06-29 21:46:46 -07:00
c5823c2605
Made timeouts more explicit in write()
2011-06-29 21:38:17 -07:00
c151ffbf67
Tidied up EN_RXADDR setting
2011-06-28 06:56:24 -07:00
8701d82615
Fix bug in setDataRate
2011-06-28 06:46:45 -07:00
a22906f961
Added setRetries()
2011-06-28 06:44:41 -07:00
04e72775bb
Add dynpd/feature to printDetails
2011-06-28 06:30:03 -07:00
81f85bd521
Prettied up printDetails some more
2011-06-28 06:27:36 -07:00
91df6f6df5
Fixed bug of not including name. Also added extra tab on short strings.
2011-06-27 21:01:58 -07:00
92373ba7f5
Refactor repeated parts of printDetails into own methods
2011-06-27 14:17:00 -07:00
059efa5ffa
Re-organized nRF24L01.h file to place 'P' features in one
...
location. Changed some bit value interpretation.
Now auto-detects P-vaiants and is queryable. setDataRate now returns a
boolean indicating success or failure of the new data rate
request. The wide_band state indicator has been added and now tracks
the state, including on error fallback. Its now possible to query the
current data rate via getDataRate().
The AA retry duration has been changed to 1500us, which is the lowest
interval allowed when running at 250Kbs, with AA enabled, and 32-byte
packets.
2011-06-27 15:02:33 -05:00
aa7a7c647a
Cleaned up some reinterpret casts to use new-style casts
2011-06-25 21:24:42 -07:00
6e6264be43
Fix bug in openReadingPipe which disallowed pipe 5
2011-06-25 21:18:13 -07:00
748fde239b
Add RF_SETUP to printDetails
2011-06-25 21:17:53 -07:00
634d0efde5
Moved the wide_band variable and initializer cleanup.
2011-06-21 15:01:10 -05:00
aac2c3dba3
Added two default values to the RF24 constructor; speed and channel.
...
Some additional constantness cleanup.
2011-06-21 14:58:19 -05:00
b1a7dc7d54
Adds constantness to method declarations and arguments where possible.
...
Added the concept of wide band. Currently not used but state is
properly tracked in accordance with data rate selection.
Default channel is changed to 64 in begin method. That needs to move
anyways.
Automatic ACKs can now be adjusted on a per pipeline bases.
2011-06-21 14:36:02 -05:00
1a37c1cd0f
New P variant feature support with corresponding defines. RF_DR is now broken into two bits to support P variant and is now obsolete. RF_DR is now RF_DR_HIGH and RF_DR_LOW; with RF_DR_HIGH corresponding to the original RF_DR bit. Data rate can now select 250kbs mode on supporting hardware.
...
Its now possible to both get and set the current PA level. LNA is obsolete in P variant.
CD is obsoleted in P variant. Can now check both CD and RDP levels. Will follow through in the future to determine if there is any real difference. Aside from dBm floor and slight changes in internal behavior, they appear identical in interface and function.
Fixes a bug in openReadingPipe which was excluding the 5th pipline. We have 6-pipelines, 0-5, so excluding the 5th (<5) would only allow for four active pipelines.
2011-06-21 10:26:16 -05:00
731c472abc
Fixed a bug in setDataRate
2011-05-27 20:11:38 -07:00
34efd5ac94
Added setCRCLength
2011-05-27 20:09:29 -07:00
ec33f03368
Made all CONFIG register changes incremental not absolute
2011-05-27 19:32:59 -07:00
4131420de7
Added setDataRate()
2011-05-26 20:48:30 -07:00
bee284f9c5
Added carrier detect and auto-ack disable, and an example to use it
2011-05-25 22:22:21 -07:00
40eea86ffe
Avoid spurious warnings
2011-05-25 20:46:31 -07:00
8f80038227
Do clock divider on chip select. Should improve SPI interop with other devices
2011-05-21 23:24:27 -07:00
1d28d28a29
Now caches the reading pipe 0 and re-sets it when starting to listen.
2011-05-15 07:21:11 -07:00
d8b2512e0c
Allow opening pipe 0 for reading. Useful if it's on a different subnet from others
2011-05-12 21:46:27 -07:00
0d20f831d0
Turned off serial debug
2011-05-10 19:34:22 -07:00
b697fd4e79
Added powerDown().
2011-05-10 15:16:06 -07:00
ffc7d099ed
Got ack payloads working. Renamed from 'ackpacket'
2011-05-10 14:39:01 -07:00
79628e7849
Added ack payload. Added a sample using pingpair as a base with minimal changes.
2011-04-30 15:31:04 -07:00
33b897318f
Moved printf format strings to progmem.
2011-04-25 20:40:51 -07:00
dfb2faa841
Removed the line that set the payload size to 8 in begin(). Reduced some ints to uint8_t. Added some more debugging info.
2011-04-25 20:29:57 -07:00
e005ec75f1
Merge branch 'master' of github.com:maniacbug/RF24
2011-04-24 12:56:51 -07:00
maniacbug