diff --git a/examples/led_remote/Jamfile b/examples/led_remote/Jamfile index eb98917..901f8da 100644 --- a/examples/led_remote/Jamfile +++ b/examples/led_remote/Jamfile @@ -62,21 +62,8 @@ PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; OUT = $(OUT_DIR)/$(PROJECT_NAME) ; # AvrDude setup - AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; -#This is not working :( -#HDRSCAN on $(OUT).pde = "^#[ \\t]*include[ \\t]*[<\\"](.*)[\\">].*$" ; -#HDRRULE on $(OUT).pde = HDER ; -#rule HDER -#{ -# Echo $(<) INCLUDES $(>:B) ; -# -# _LIB = [ GLOB $(ARDUINO_LIB)/$(>:B) $(SKETCH_LIB)/$(>:B) : *.cpp ] ; -# Includes $(<) : $(OUT_DIR)/$(_LIB:B).o ; -# Echo [ GLOB $(ARDUINO_LIB)/$(>:B) $(SKETCH_LIB)/$(>:B) : *.cpp ] ; -#} - rule GitVersion { Always $(<) ; @@ -128,9 +115,6 @@ rule Pde Depends $(<) : $(<:D) ; Clean clean : $(<) ; -# Could not get headerscan to work :( -# HDRRULE on $(>) = HDER ; -# HDRSCAN on $(>) = $(HDRPATTERN) ; } actions Pde diff --git a/examples/led_remote/makefile b/examples/led_remote/makefile deleted file mode 100644 index 493a159..0000000 --- a/examples/led_remote/makefile +++ /dev/null @@ -1,305 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# Modified by Kerry Wong to support NetBeans -# Modified by Rob Gray (Graynomad) for use with Windows and no IDE -# This works in my environment and I use it to program two different -# 328-based boards and a Mega2560. It's not necessarily robust and -# I may have broken something in the original file that I don't use. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment. -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. The project code file -# should have a .c extension however the file gets copied to a .cpp before -# compilation so you still write in C++. -# -# 2. Modify the lines between the double ### rows to set the paths -# comm ports etc for your system. EG. c:/progra~1/arduino/arduino-00 -# for the Arduino IDE, Note the use of short folder name, don't use -# "Program files" because spaces will break the build. -# -# Set the line containing "MCU" to match your board's processor. -# Typically ATmega328 or ATmega2560. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 3. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 4. Type "make" and press enter to compile/verify your program. -# The default make target will also perform the uplode using avrdude. -# -# The first time this is done all required libraries will be built -# and a core.a file will be created in the output folder. -# -# NOTES: -# All output goes into a folder called "output" underneath the working folder. -# The default all: target creates symbol (.sym) and expanded assembly -# (.lss) files and uploads the program. -# -# -########################################################## -########################################################## -# Select processor here -MCU = atmega328p -#MCU = atmega2560 - -ifeq ($(MCU),atmega2560) -UPLOAD_RATE = 115200 -AVRDUDE_PROTOCOL = stk500v2 -COM = 39 -endif - -ifeq ($(MCU),atmega328p) -UPLOAD_RATE = 57600 -AVRDUDE_PROTOCOL = stk500v1 -COM = 33 -endif - -UNAME := $(shell uname) - -ifeq ($(UNAME),Darwin) -ARDUINO_VERSION = 21 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(ARDUINO_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools/avr/etc -PORT = /dev/tty.usbserial-A600eHIs -PORT2 = /dev/tty.usbserial-A9007LmI -PORT3 = /dev/tty.usbserial-A40081RP -else -ARDUINO_VERSION = 22 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = /usr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools -PORT = /dev/ttyUSB0 -PORT2 = /dev/ttyUSB1 -endif - -# Temporary testing of github Arduino environment -OLD_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc -ARDUINO_DIR = /opt/Arduino - -PROJECT_NAME = $(notdir $(PWD)) -PROJECT_DIR = . -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_AVR = $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr -ARDUINO_LIB = $(ARDUINO_DIR)/libraries -F_CPU = 16000000 - -########################################################## -########################################################## - -# Note that if your program has dependencies other than those -# already listed below, you will need to add them accordingly. -C_MODULES = \ -$(ARDUINO_CORE)/wiring_pulse.c \ -$(ARDUINO_CORE)/wiring_analog.c \ -$(ARDUINO_CORE)/pins_arduino.c \ -$(ARDUINO_CORE)/wiring.c \ -$(ARDUINO_CORE)/wiring_digital.c \ -$(ARDUINO_CORE)/WInterrupts.c \ -$(ARDUINO_CORE)/wiring_shift.c \ - -CXX_MODULES = \ -$(ARDUINO_CORE)/Tone.cpp \ -$(ARDUINO_CORE)/main.cpp \ -$(ARDUINO_CORE)/WMath.cpp \ -$(ARDUINO_CORE)/Print.cpp \ -$(ARDUINO_CORE)/HardwareSerial.cpp \ -$(ARDUINO_LIB)/SPI/SPI.cpp \ -$(ARDUINO_LIB)/EEPROM/EEPROM.cpp \ -../../RF24.cpp - -CXX_APP = output/$(PROJECT_NAME).cpp -MODULES = $(C_MODULES) $(CXX_MODULES) -SRC = $(C_MODULES) -CXXSRC = $(CXX_MODULES) $(CXX_APP) -FORMAT = ihex - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -#DEBUG = stabs -DEBUG = - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) -CXXDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) - -# Place -I options here -CINCS = -I$(ARDUINO_LIB)/EEPROM -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) -I$(PROJECT_DIR) -I$(ARDUINO_AVR) -I$(ARDUINO_LIB)/SPI -I$(MY_LIB)/Bounce -I$(MY_LIB)/ButtonSpace -I../.. - -CXXINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -#CWARN = -Wall -Wstrict-prototypes -CWARN = -Wall # show all warnings -#CWARN = -w # suppress all warnings -CMAP = -Wl,-Map,output.map -####CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -CTUNING = -ffunction-sections -fdata-sections -CXXTUNING = -fno-exceptions -ffunction-sections -fdata-sections -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) -MMCU = -mmcu=$(MCU) - -CFLAGS = $(CDEBUG) -O$(OPT) $(CMAP) $(CWARN) $(CTUNING) $(MMCU) $(CDEFS) $(CINCS) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEBUG) -O$(OPT) $(CWARN) $(CXXTUNING) $(CDEFS) $(CINCS) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -O$(OPT) -lm -Wl,--gc-sections -#LDFLAGS = -O$(OPT) -lm -Wl,-Map,output/$(PROJECT_NAME).map - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:output/$(PROJECT_NAME).hex:i - -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf \ --p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -LD = $(AVR_TOOLS_PATH)/avr-gcc -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) -OBJ_MODULES = $(C_MODULES:.c=.o) $(CXX_MODULES:.cpp=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = $(CFLAGS) -mmcu=$(MCU) -ALL_CXXFLAGS = $(CXXFLAGS) -mmcu=$(MCU) -ALL_ASFLAGS = -x assembler-with-cpp $(ASFLAGS) -mmcu=$(MCU) -ALL_LDFLAGS = $(LDFLAGS) -mmcu=$(MCU) - -# Default target. -# This is th etarget that gets executed with a make command -# that has no parameters, ie "make". -all: applet_files build sym lss size upload - -build: elf hex - -output/$(PROJECT_NAME).cpp: $(PROJECT_NAME).pde - test -d output || mkdir output - echo "#include " > $@ - echo "#line 1 \"$<\"" >> $@ - cat $< >> $@ - -elf: output/$(PROJECT_NAME).elf -hex: output/$(PROJECT_NAME).hex -eep: output/$(PROJECT_NAME).eep -lss: output/$(PROJECT_NAME).lss -#sym: output/$(PROJECT_NAME).sym - -# Upload HEX file to Arduino -upload: upload1 upload2 - -upload1: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT) $(AVRDUDE_WRITE_FLASH) - -upload2: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT2) $(AVRDUDE_WRITE_FLASH) - -upload3: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT3) $(AVRDUDE_WRITE_FLASH) - -sym: - $(NM) -n -C --format=posix output/$(PROJECT_NAME).elf > output/$(PROJECT_NAME).sym - -# Display size of file. -size: - $(SIZE) output/$(PROJECT_NAME).elf - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - -coff: output/$(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - - extcoff: $(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-ext-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - $(OBJCOPY) -O $(FORMAT) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --no-change-warnings \ - --change-section-lma .eeprom=0 $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Link: create ELF output file from library. -#output/$(PROJECT_NAME).elf: $(PROJECT_NAME).c output/core.a -output/$(PROJECT_NAME).elf: output/$(PROJECT_NAME).o output/core.a - $(LD) $(ALL_LDFLAGS) -o $@ output/$(PROJECT_NAME).o output/core.a - -output/core.a: $(OBJ_MODULES) - @for i in $(OBJ_MODULES); do echo $(AR) rcs output/core.a $$i; $(AR) rcs output/core.a $$i; done - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -# Target: clean project. -clean: - $(REMOVE) output/$(PROJECT_NAME).hex output/$(PROJECT_NAME).eep output/$(PROJECT_NAME).cof output/$(PROJECT_NAME).elf \ - output/$(PROJECT_NAME).map output/$(PROJECT_NAME).sym output/$(PROJECT_NAME).lss output/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -#.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter -.PHONY: all build elf hex eep lss sym program coff extcoff applet_files sizebefore sizeafter - -#include $(SRC:.c=.d) -#include $(CXXSRC:.cpp=.d) diff --git a/examples/pingpair/Jamfile b/examples/pingpair/Jamfile new file mode 100644 index 0000000..901f8da --- /dev/null +++ b/examples/pingpair/Jamfile @@ -0,0 +1,206 @@ +PROJECT_NAME = $(PWD:B) ; +PROJECT_DIR = . ; +PROJECT_LIBS = SPI RF24 ; + +OUT_DIR = ojam ; +F_CPU = 16000000 ; +MCU = atmega328p ; +PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; + +UPLOAD_RATE = 57600 ; +AVRDUDE_PROTOCOL = stk500v1 ; +COM = 33 ; + +# Host-specific overrides for locations +if $(OS) = MACOSX +{ +ARDUINO_VERSION = 22 ; +OLD_DIR = /opt/arduino-0021 ; +AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; +AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; +ARDUINO_DIR = /opt/Arduino ; +ARDUINO_AVR = /usr/lib/avr/include ; +} + +# Where is everything? +ARDUINO_VERSION ?= 22 ; +AVR_TOOLS_PATH ?= /usr/bin ; +ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; +ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; +AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; +ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; +ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; +SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; +AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; +AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; + +DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; +CTUNING = -ffunction-sections -fdata-sections ; +CXXTUNING = -fno-exceptions -fno-strict-aliasing ; +CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; +CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; +LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; + +# Search everywhere for headers +HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; + +# Grab everything from the core directory +CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; + +# Grab everything from libraries. To avoid this "grab everything" behaviour, you +# can specify specific modules to pick up in PROJECT_MODULES +LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; + +# In addition to explicitly-specified program modules, pick up anything from the current +# dir. +PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; + +# Shortcut for the out files +OUT = $(OUT_DIR)/$(PROJECT_NAME) ; + +# AvrDude setup +AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; + +rule GitVersion +{ + Always $(<) ; + Depends all : $(<) ; +} + +actions GitVersion +{ + echo "const char program_version[] = \"\\" > $(<) + git log -1 --pretty=format:%h >> $(<) + echo "\";" >> $(<) +} + +GitVersion version.h ; + +rule AvrCc +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrCc +{ + $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) +} + +rule AvrC++ +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrC++ +{ + $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) +} + +rule Pde +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + +} + +actions Pde +{ + echo "#include " > $(<) + echo "#line 1 \"$(>)\"" >> $(<) + cat $(>) >> $(<) +} + +rule AvrPde +{ + local _CPP = $(OUT_DIR)/$(_I:B).cpp ; + Pde $(_CPP) : $(>) ; + AvrC++ $(<) : $(_CPP) ; +} + +rule AvrObject +{ + switch $(>:S) + { + case .c : AvrCc $(<) : $(>) ; + case .cpp : AvrC++ $(<) : $(>) ; + case .pde : AvrPde $(<) : $(>) ; + } +} + +rule AvrObjects +{ + for _I in $(<) + { + AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; + } +} + +rule AvrMainFromObjects +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + MkDir $(<:D) ; + Depends all : $(<) ; + Clean clean : $(<) ; +} + +actions AvrMainFromObjects +{ + $(AVR_LD) $(LDFLAGS) -o $(<) $(>) +} + +rule AvrMain +{ + AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; + AvrObjects $(>) ; +} + +rule AvrHex +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Depends hex : $(<) ; + Clean clean : $(<) ; +} + +actions AvrHex +{ + $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) +} + +rule AvrUpload +{ + Depends $(1) : $(2) ; + Depends $(2) : $(3) ; + NotFile $(1) ; + Always $(1) ; + Always $(2) ; + AvrUploadAction $(2) : $(3) ; +} + +actions AvrUploadAction +{ + $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i +} + +AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; +AvrHex $(OUT).hex : $(OUT).elf ; + +AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; +AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; +AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; + diff --git a/examples/pingpair/makefile b/examples/pingpair/makefile deleted file mode 100644 index 15cb43b..0000000 --- a/examples/pingpair/makefile +++ /dev/null @@ -1,305 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# Modified by Kerry Wong to support NetBeans -# Modified by Rob Gray (Graynomad) for use with Windows and no IDE -# This works in my environment and I use it to program two different -# 328-based boards and a Mega2560. It's not necessarily robust and -# I may have broken something in the original file that I don't use. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment. -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. The project code file -# should have a .c extension however the file gets copied to a .cpp before -# compilation so you still write in C++. -# -# 2. Modify the lines between the double ### rows to set the paths -# comm ports etc for your system. EG. c:/progra~1/arduino/arduino-00 -# for the Arduino IDE, Note the use of short folder name, don't use -# "Program files" because spaces will break the build. -# -# Set the line containing "MCU" to match your board's processor. -# Typically ATmega328 or ATmega2560. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 3. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 4. Type "make" and press enter to compile/verify your program. -# The default make target will also perform the uplode using avrdude. -# -# The first time this is done all required libraries will be built -# and a core.a file will be created in the output folder. -# -# NOTES: -# All output goes into a folder called "output" underneath the working folder. -# The default all: target creates symbol (.sym) and expanded assembly -# (.lss) files and uploads the program. -# -# -########################################################## -########################################################## -# Select processor here -MCU = atmega328p -#MCU = atmega2560 - -ifeq ($(MCU),atmega2560) -UPLOAD_RATE = 115200 -AVRDUDE_PROTOCOL = stk500v2 -COM = 39 -endif - -ifeq ($(MCU),atmega328p) -UPLOAD_RATE = 57600 -AVRDUDE_PROTOCOL = stk500v1 -COM = 33 -endif - -UNAME := $(shell uname) - -ifeq ($(UNAME),Darwin) -ARDUINO_VERSION = 21 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(ARDUINO_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools/avr/etc -PORT = /dev/tty.usbserial-A600eHIs -PORT2 = /dev/tty.usbserial-A9007LmI -PORT3 = /dev/tty.usbserial-A40081RP -else -ARDUINO_VERSION = 22 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = /usr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools -PORT = /dev/ttyUSB0 -PORT2 = /dev/ttyUSB1 -endif - -# Temporary testing of github Arduino environment -OLD_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc -ARDUINO_DIR = /opt/Arduino - -PROJECT_NAME = $(notdir $(PWD)) -PROJECT_DIR = . -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_AVR = $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr -ARDUINO_LIB = $(ARDUINO_DIR)/libraries -F_CPU = 16000000 - -########################################################## -########################################################## - -# Note that if your program has dependencies other than those -# already listed below, you will need to add them accordingly. -C_MODULES = \ -$(ARDUINO_CORE)/wiring_pulse.c \ -$(ARDUINO_CORE)/wiring_analog.c \ -$(ARDUINO_CORE)/pins_arduino.c \ -$(ARDUINO_CORE)/wiring.c \ -$(ARDUINO_CORE)/wiring_digital.c \ -$(ARDUINO_CORE)/WInterrupts.c \ -$(ARDUINO_CORE)/wiring_shift.c \ - -CXX_MODULES = \ -$(ARDUINO_CORE)/Tone.cpp \ -$(ARDUINO_CORE)/main.cpp \ -$(ARDUINO_CORE)/WMath.cpp \ -$(ARDUINO_CORE)/Print.cpp \ -$(ARDUINO_CORE)/HardwareSerial.cpp \ -$(ARDUINO_LIB)/SPI/SPI.cpp \ -$(ARDUINO_LIB)/EEPROM/EEPROM.cpp \ -../../RF24.cpp - -CXX_APP = output/$(PROJECT_NAME).cpp -MODULES = $(C_MODULES) $(CXX_MODULES) -SRC = $(C_MODULES) -CXXSRC = $(CXX_MODULES) $(CXX_APP) -FORMAT = ihex - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -#DEBUG = stabs -DEBUG = - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) -CXXDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) - -# Place -I options here -CINCS = -I$(ARDUINO_LIB)/EEPROM -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) -I$(PROJECT_DIR) -I$(ARDUINO_AVR) -I$(ARDUINO_LIB)/SPI -I../.. - -CXXINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -#CWARN = -Wall -Wstrict-prototypes -CWARN = -Wall # show all warnings -#CWARN = -w # suppress all warnings -CMAP = -Wl,-Map,output.map -####CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -CTUNING = -ffunction-sections -fdata-sections -CXXTUNING = -fno-exceptions -ffunction-sections -fdata-sections -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) -MMCU = -mmcu=$(MCU) - -CFLAGS = $(CDEBUG) -O$(OPT) $(CMAP) $(CWARN) $(CTUNING) $(MMCU) $(CDEFS) $(CINCS) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEBUG) -O$(OPT) $(CWARN) $(CXXTUNING) $(CDEFS) $(CINCS) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -O$(OPT) -lm -Wl,--gc-sections -#LDFLAGS = -O$(OPT) -lm -Wl,-Map,output/$(PROJECT_NAME).map - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:output/$(PROJECT_NAME).hex:i - -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf \ --p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -LD = $(AVR_TOOLS_PATH)/avr-gcc -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) -OBJ_MODULES = $(C_MODULES:.c=.o) $(CXX_MODULES:.cpp=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = $(CFLAGS) -mmcu=$(MCU) -ALL_CXXFLAGS = $(CXXFLAGS) -mmcu=$(MCU) -ALL_ASFLAGS = -x assembler-with-cpp $(ASFLAGS) -mmcu=$(MCU) -ALL_LDFLAGS = $(LDFLAGS) -mmcu=$(MCU) - -# Default target. -# This is th etarget that gets executed with a make command -# that has no parameters, ie "make". -all: applet_files build sym lss size upload - -build: elf hex - -output/$(PROJECT_NAME).cpp: $(PROJECT_NAME).pde - test -d output || mkdir output - echo "#include " > $@ - echo "#line 1 \"$<\"" >> $@ - cat $< >> $@ - -elf: output/$(PROJECT_NAME).elf -hex: output/$(PROJECT_NAME).hex -eep: output/$(PROJECT_NAME).eep -lss: output/$(PROJECT_NAME).lss -#sym: output/$(PROJECT_NAME).sym - -# Upload HEX file to Arduino -upload: upload1 upload2 - -upload1: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT) $(AVRDUDE_WRITE_FLASH) - -upload2: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT2) $(AVRDUDE_WRITE_FLASH) - -upload3: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT3) $(AVRDUDE_WRITE_FLASH) - -sym: - $(NM) -n -C --format=posix output/$(PROJECT_NAME).elf > output/$(PROJECT_NAME).sym - -# Display size of file. -size: - $(SIZE) output/$(PROJECT_NAME).elf - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - -coff: output/$(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - - extcoff: $(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-ext-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - $(OBJCOPY) -O $(FORMAT) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --no-change-warnings \ - --change-section-lma .eeprom=0 $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Link: create ELF output file from library. -#output/$(PROJECT_NAME).elf: $(PROJECT_NAME).c output/core.a -output/$(PROJECT_NAME).elf: output/$(PROJECT_NAME).o output/core.a - $(LD) $(ALL_LDFLAGS) -o $@ output/$(PROJECT_NAME).o output/core.a - -output/core.a: $(OBJ_MODULES) - @for i in $(OBJ_MODULES); do echo $(AR) rcs output/core.a $$i; $(AR) rcs output/core.a $$i; done - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -# Target: clean project. -clean: - $(REMOVE) output/$(PROJECT_NAME).hex output/$(PROJECT_NAME).eep output/$(PROJECT_NAME).cof output/$(PROJECT_NAME).elf \ - output/$(PROJECT_NAME).map output/$(PROJECT_NAME).sym output/$(PROJECT_NAME).lss output/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -#.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter -.PHONY: all build elf hex eep lss sym program coff extcoff applet_files sizebefore sizeafter - -#include $(SRC:.c=.d) -#include $(CXXSRC:.cpp=.d) diff --git a/examples/pingpair/printf.h b/examples/pingpair/printf.h index 63501e4..df6c46a 100644 --- a/examples/pingpair/printf.h +++ b/examples/pingpair/printf.h @@ -18,7 +18,7 @@ #include "WProgram.h" -int serial_putc( char c, FILE *t ) +int serial_putc( char c, FILE * ) { Serial.write( c ); diff --git a/examples/pingpair_pl/Jamfile b/examples/pingpair_pl/Jamfile new file mode 100644 index 0000000..901f8da --- /dev/null +++ b/examples/pingpair_pl/Jamfile @@ -0,0 +1,206 @@ +PROJECT_NAME = $(PWD:B) ; +PROJECT_DIR = . ; +PROJECT_LIBS = SPI RF24 ; + +OUT_DIR = ojam ; +F_CPU = 16000000 ; +MCU = atmega328p ; +PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; + +UPLOAD_RATE = 57600 ; +AVRDUDE_PROTOCOL = stk500v1 ; +COM = 33 ; + +# Host-specific overrides for locations +if $(OS) = MACOSX +{ +ARDUINO_VERSION = 22 ; +OLD_DIR = /opt/arduino-0021 ; +AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; +AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; +ARDUINO_DIR = /opt/Arduino ; +ARDUINO_AVR = /usr/lib/avr/include ; +} + +# Where is everything? +ARDUINO_VERSION ?= 22 ; +AVR_TOOLS_PATH ?= /usr/bin ; +ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; +ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; +AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; +ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; +ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; +SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; +AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; +AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; + +DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; +CTUNING = -ffunction-sections -fdata-sections ; +CXXTUNING = -fno-exceptions -fno-strict-aliasing ; +CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; +CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; +LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; + +# Search everywhere for headers +HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; + +# Grab everything from the core directory +CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; + +# Grab everything from libraries. To avoid this "grab everything" behaviour, you +# can specify specific modules to pick up in PROJECT_MODULES +LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; + +# In addition to explicitly-specified program modules, pick up anything from the current +# dir. +PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; + +# Shortcut for the out files +OUT = $(OUT_DIR)/$(PROJECT_NAME) ; + +# AvrDude setup +AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; + +rule GitVersion +{ + Always $(<) ; + Depends all : $(<) ; +} + +actions GitVersion +{ + echo "const char program_version[] = \"\\" > $(<) + git log -1 --pretty=format:%h >> $(<) + echo "\";" >> $(<) +} + +GitVersion version.h ; + +rule AvrCc +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrCc +{ + $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) +} + +rule AvrC++ +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrC++ +{ + $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) +} + +rule Pde +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + +} + +actions Pde +{ + echo "#include " > $(<) + echo "#line 1 \"$(>)\"" >> $(<) + cat $(>) >> $(<) +} + +rule AvrPde +{ + local _CPP = $(OUT_DIR)/$(_I:B).cpp ; + Pde $(_CPP) : $(>) ; + AvrC++ $(<) : $(_CPP) ; +} + +rule AvrObject +{ + switch $(>:S) + { + case .c : AvrCc $(<) : $(>) ; + case .cpp : AvrC++ $(<) : $(>) ; + case .pde : AvrPde $(<) : $(>) ; + } +} + +rule AvrObjects +{ + for _I in $(<) + { + AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; + } +} + +rule AvrMainFromObjects +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + MkDir $(<:D) ; + Depends all : $(<) ; + Clean clean : $(<) ; +} + +actions AvrMainFromObjects +{ + $(AVR_LD) $(LDFLAGS) -o $(<) $(>) +} + +rule AvrMain +{ + AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; + AvrObjects $(>) ; +} + +rule AvrHex +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Depends hex : $(<) ; + Clean clean : $(<) ; +} + +actions AvrHex +{ + $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) +} + +rule AvrUpload +{ + Depends $(1) : $(2) ; + Depends $(2) : $(3) ; + NotFile $(1) ; + Always $(1) ; + Always $(2) ; + AvrUploadAction $(2) : $(3) ; +} + +actions AvrUploadAction +{ + $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i +} + +AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; +AvrHex $(OUT).hex : $(OUT).elf ; + +AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; +AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; +AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; + diff --git a/examples/pingpair_pl/makefile b/examples/pingpair_pl/makefile deleted file mode 100644 index a1c6d4c..0000000 --- a/examples/pingpair_pl/makefile +++ /dev/null @@ -1,290 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# Modified by Kerry Wong to support NetBeans -# Modified by Rob Gray (Graynomad) for use with Windows and no IDE -# This works in my environment and I use it to program two different -# 328-based boards and a Mega2560. It's not necessarily robust and -# I may have broken something in the original file that I don't use. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment. -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. The project code file -# should have a .c extension however the file gets copied to a .cpp before -# compilation so you still write in C++. -# -# 2. Modify the lines between the double ### rows to set the paths -# comm ports etc for your system. EG. c:/progra~1/arduino/arduino-00 -# for the Arduino IDE, Note the use of short folder name, don't use -# "Program files" because spaces will break the build. -# -# Set the line containing "MCU" to match your board's processor. -# Typically ATmega328 or ATmega2560. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 3. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 4. Type "make" and press enter to compile/verify your program. -# The default make target will also perform the uplode using avrdude. -# -# The first time this is done all required libraries will be built -# and a core.a file will be created in the output folder. -# -# NOTES: -# All output goes into a folder called "output" underneath the working folder. -# The default all: target creates symbol (.sym) and expanded assembly -# (.lss) files and uploads the program. -# -# -########################################################## -########################################################## -# Select processor here -MCU = atmega328p -#MCU = atmega2560 - -ifeq ($(MCU),atmega2560) -UPLOAD_RATE = 115200 -AVRDUDE_PROTOCOL = stk500v2 -COM = 39 -endif - -ifeq ($(MCU),atmega328p) -UPLOAD_RATE = 57600 -AVRDUDE_PROTOCOL = stk500v1 -COM = 33 -endif - -UNAME := $(shell uname) - -ifeq ($(UNAME),Darwin) -ARDUINO_VERSION = 21 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(ARDUINO_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools/avr/etc -PORT = /dev/tty.usbserial-A600eHIs -PORT2 = /dev/tty.usbserial-A9007LmI -else -ARDUINO_VERSION = 22 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = /usr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools -PORT = /dev/ttyUSB0 -PORT2 = /dev/ttyUSB1 -endif - -PROJECT_NAME = $(notdir $(PWD)) -PROJECT_DIR = . -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_AVR = $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr -ARDUINO_LIB = $(ARDUINO_DIR)/libraries -F_CPU = 16000000 - -########################################################## -########################################################## - -# Note that if your program has dependencies other than those -# already listed below, you will need to add them accordingly. -C_MODULES = \ -$(ARDUINO_CORE)/wiring_pulse.c \ -$(ARDUINO_CORE)/wiring_analog.c \ -$(ARDUINO_CORE)/pins_arduino.c \ -$(ARDUINO_CORE)/wiring.c \ -$(ARDUINO_CORE)/wiring_digital.c \ -$(ARDUINO_CORE)/WInterrupts.c \ -$(ARDUINO_CORE)/wiring_shift.c \ - -CXX_MODULES = \ -$(ARDUINO_CORE)/Tone.cpp \ -$(ARDUINO_CORE)/main.cpp \ -$(ARDUINO_CORE)/WMath.cpp \ -$(ARDUINO_CORE)/Print.cpp \ -$(ARDUINO_CORE)/HardwareSerial.cpp \ -$(ARDUINO_LIB)/SPI/SPI.cpp \ -../../RF24.cpp - -CXX_APP = output/$(PROJECT_NAME).cpp -MODULES = $(C_MODULES) $(CXX_MODULES) -SRC = $(C_MODULES) -CXXSRC = $(CXX_MODULES) $(CXX_APP) -FORMAT = ihex - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -#DEBUG = stabs -DEBUG = - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) -CXXDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) - -# Place -I options here -CINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) -I$(PROJECT_DIR) -I$(ARDUINO_AVR) -I$(ARDUINO_LIB)/SPI -I../.. - -CXXINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -#CWARN = -Wall -Wstrict-prototypes -CWARN = -Wall # show all warnings -#CWARN = -w # suppress all warnings -CMAP = -Wl,-Map,output.map -####CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -CTUNING = -ffunction-sections -fdata-sections -CXXTUNING = -fno-exceptions -ffunction-sections -fdata-sections -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) -MMCU = -mmcu=$(MCU) - -CFLAGS = $(CDEBUG) -O$(OPT) $(CMAP) $(CWARN) $(CTUNING) $(MMCU) $(CDEFS) $(CINCS) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEBUG) -O$(OPT) $(CWARN) $(CXXTUNING) $(CDEFS) $(CINCS) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -O$(OPT) -lm -Wl,--gc-sections -#LDFLAGS = -O$(OPT) -lm -Wl,-Map,output/$(PROJECT_NAME).map - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:output/$(PROJECT_NAME).hex:i - -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf \ --p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -LD = $(AVR_TOOLS_PATH)/avr-gcc -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) -OBJ_MODULES = $(C_MODULES:.c=.o) $(CXX_MODULES:.cpp=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = $(CFLAGS) -mmcu=$(MCU) -ALL_CXXFLAGS = $(CXXFLAGS) -mmcu=$(MCU) -ALL_ASFLAGS = -x assembler-with-cpp $(ASFLAGS) -mmcu=$(MCU) -ALL_LDFLAGS = $(LDFLAGS) -mmcu=$(MCU) - -# Default target. -# This is th etarget that gets executed with a make command -# that has no parameters, ie "make". -all: applet_files build sym lss size upload - -build: elf hex - -output/$(PROJECT_NAME).cpp: $(PROJECT_NAME).pde - test -d output || mkdir output - echo "#include " > $@ - echo "#line 1 \"$<\"" >> $@ - cat $< >> $@ - -elf: output/$(PROJECT_NAME).elf -hex: output/$(PROJECT_NAME).hex -eep: output/$(PROJECT_NAME).eep -lss: output/$(PROJECT_NAME).lss -#sym: output/$(PROJECT_NAME).sym - -# Upload HEX file to Arduino -upload: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT) $(AVRDUDE_WRITE_FLASH) - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT2) $(AVRDUDE_WRITE_FLASH) - -sym: - $(NM) -n -C --format=posix output/$(PROJECT_NAME).elf > output/$(PROJECT_NAME).sym - -# Display size of file. -size: - $(SIZE) output/$(PROJECT_NAME).elf - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - -coff: output/$(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - - extcoff: $(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-ext-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - $(OBJCOPY) -O $(FORMAT) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --no-change-warnings \ - --change-section-lma .eeprom=0 $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Link: create ELF output file from library. -#output/$(PROJECT_NAME).elf: $(PROJECT_NAME).c output/core.a -output/$(PROJECT_NAME).elf: output/$(PROJECT_NAME).o output/core.a - $(LD) $(ALL_LDFLAGS) -o $@ output/$(PROJECT_NAME).o output/core.a - -output/core.a: $(OBJ_MODULES) - @for i in $(OBJ_MODULES); do echo $(AR) rcs output/core.a $$i; $(AR) rcs output/core.a $$i; done - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -# Target: clean project. -clean: - $(REMOVE) output/$(PROJECT_NAME).hex output/$(PROJECT_NAME).eep output/$(PROJECT_NAME).cof output/$(PROJECT_NAME).elf \ - output/$(PROJECT_NAME).map output/$(PROJECT_NAME).sym output/$(PROJECT_NAME).lss output/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -#.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter -.PHONY: all build elf hex eep lss sym program coff extcoff applet_files sizebefore sizeafter - -#include $(SRC:.c=.d) -#include $(CXXSRC:.cpp=.d) diff --git a/examples/pingpair_pl/printf.h b/examples/pingpair_pl/printf.h index 63501e4..df6c46a 100644 --- a/examples/pingpair_pl/printf.h +++ b/examples/pingpair_pl/printf.h @@ -18,7 +18,7 @@ #include "WProgram.h" -int serial_putc( char c, FILE *t ) +int serial_putc( char c, FILE * ) { Serial.write( c ); diff --git a/examples/pingpair_sleepy/Jamfile b/examples/pingpair_sleepy/Jamfile new file mode 100644 index 0000000..901f8da --- /dev/null +++ b/examples/pingpair_sleepy/Jamfile @@ -0,0 +1,206 @@ +PROJECT_NAME = $(PWD:B) ; +PROJECT_DIR = . ; +PROJECT_LIBS = SPI RF24 ; + +OUT_DIR = ojam ; +F_CPU = 16000000 ; +MCU = atmega328p ; +PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; + +UPLOAD_RATE = 57600 ; +AVRDUDE_PROTOCOL = stk500v1 ; +COM = 33 ; + +# Host-specific overrides for locations +if $(OS) = MACOSX +{ +ARDUINO_VERSION = 22 ; +OLD_DIR = /opt/arduino-0021 ; +AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; +AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; +ARDUINO_DIR = /opt/Arduino ; +ARDUINO_AVR = /usr/lib/avr/include ; +} + +# Where is everything? +ARDUINO_VERSION ?= 22 ; +AVR_TOOLS_PATH ?= /usr/bin ; +ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; +ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; +AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; +ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; +ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; +SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; +AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; +AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; + +DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; +CTUNING = -ffunction-sections -fdata-sections ; +CXXTUNING = -fno-exceptions -fno-strict-aliasing ; +CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; +CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; +LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; + +# Search everywhere for headers +HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; + +# Grab everything from the core directory +CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; + +# Grab everything from libraries. To avoid this "grab everything" behaviour, you +# can specify specific modules to pick up in PROJECT_MODULES +LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; + +# In addition to explicitly-specified program modules, pick up anything from the current +# dir. +PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; + +# Shortcut for the out files +OUT = $(OUT_DIR)/$(PROJECT_NAME) ; + +# AvrDude setup +AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; + +rule GitVersion +{ + Always $(<) ; + Depends all : $(<) ; +} + +actions GitVersion +{ + echo "const char program_version[] = \"\\" > $(<) + git log -1 --pretty=format:%h >> $(<) + echo "\";" >> $(<) +} + +GitVersion version.h ; + +rule AvrCc +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrCc +{ + $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) +} + +rule AvrC++ +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrC++ +{ + $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) +} + +rule Pde +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + +} + +actions Pde +{ + echo "#include " > $(<) + echo "#line 1 \"$(>)\"" >> $(<) + cat $(>) >> $(<) +} + +rule AvrPde +{ + local _CPP = $(OUT_DIR)/$(_I:B).cpp ; + Pde $(_CPP) : $(>) ; + AvrC++ $(<) : $(_CPP) ; +} + +rule AvrObject +{ + switch $(>:S) + { + case .c : AvrCc $(<) : $(>) ; + case .cpp : AvrC++ $(<) : $(>) ; + case .pde : AvrPde $(<) : $(>) ; + } +} + +rule AvrObjects +{ + for _I in $(<) + { + AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; + } +} + +rule AvrMainFromObjects +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + MkDir $(<:D) ; + Depends all : $(<) ; + Clean clean : $(<) ; +} + +actions AvrMainFromObjects +{ + $(AVR_LD) $(LDFLAGS) -o $(<) $(>) +} + +rule AvrMain +{ + AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; + AvrObjects $(>) ; +} + +rule AvrHex +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Depends hex : $(<) ; + Clean clean : $(<) ; +} + +actions AvrHex +{ + $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) +} + +rule AvrUpload +{ + Depends $(1) : $(2) ; + Depends $(2) : $(3) ; + NotFile $(1) ; + Always $(1) ; + Always $(2) ; + AvrUploadAction $(2) : $(3) ; +} + +actions AvrUploadAction +{ + $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i +} + +AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; +AvrHex $(OUT).hex : $(OUT).elf ; + +AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; +AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; +AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; + diff --git a/examples/pingpair_sleepy/makefile b/examples/pingpair_sleepy/makefile deleted file mode 100644 index a1c6d4c..0000000 --- a/examples/pingpair_sleepy/makefile +++ /dev/null @@ -1,290 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# Modified by Kerry Wong to support NetBeans -# Modified by Rob Gray (Graynomad) for use with Windows and no IDE -# This works in my environment and I use it to program two different -# 328-based boards and a Mega2560. It's not necessarily robust and -# I may have broken something in the original file that I don't use. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment. -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. The project code file -# should have a .c extension however the file gets copied to a .cpp before -# compilation so you still write in C++. -# -# 2. Modify the lines between the double ### rows to set the paths -# comm ports etc for your system. EG. c:/progra~1/arduino/arduino-00 -# for the Arduino IDE, Note the use of short folder name, don't use -# "Program files" because spaces will break the build. -# -# Set the line containing "MCU" to match your board's processor. -# Typically ATmega328 or ATmega2560. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 3. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 4. Type "make" and press enter to compile/verify your program. -# The default make target will also perform the uplode using avrdude. -# -# The first time this is done all required libraries will be built -# and a core.a file will be created in the output folder. -# -# NOTES: -# All output goes into a folder called "output" underneath the working folder. -# The default all: target creates symbol (.sym) and expanded assembly -# (.lss) files and uploads the program. -# -# -########################################################## -########################################################## -# Select processor here -MCU = atmega328p -#MCU = atmega2560 - -ifeq ($(MCU),atmega2560) -UPLOAD_RATE = 115200 -AVRDUDE_PROTOCOL = stk500v2 -COM = 39 -endif - -ifeq ($(MCU),atmega328p) -UPLOAD_RATE = 57600 -AVRDUDE_PROTOCOL = stk500v1 -COM = 33 -endif - -UNAME := $(shell uname) - -ifeq ($(UNAME),Darwin) -ARDUINO_VERSION = 21 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(ARDUINO_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools/avr/etc -PORT = /dev/tty.usbserial-A600eHIs -PORT2 = /dev/tty.usbserial-A9007LmI -else -ARDUINO_VERSION = 22 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = /usr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools -PORT = /dev/ttyUSB0 -PORT2 = /dev/ttyUSB1 -endif - -PROJECT_NAME = $(notdir $(PWD)) -PROJECT_DIR = . -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_AVR = $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr -ARDUINO_LIB = $(ARDUINO_DIR)/libraries -F_CPU = 16000000 - -########################################################## -########################################################## - -# Note that if your program has dependencies other than those -# already listed below, you will need to add them accordingly. -C_MODULES = \ -$(ARDUINO_CORE)/wiring_pulse.c \ -$(ARDUINO_CORE)/wiring_analog.c \ -$(ARDUINO_CORE)/pins_arduino.c \ -$(ARDUINO_CORE)/wiring.c \ -$(ARDUINO_CORE)/wiring_digital.c \ -$(ARDUINO_CORE)/WInterrupts.c \ -$(ARDUINO_CORE)/wiring_shift.c \ - -CXX_MODULES = \ -$(ARDUINO_CORE)/Tone.cpp \ -$(ARDUINO_CORE)/main.cpp \ -$(ARDUINO_CORE)/WMath.cpp \ -$(ARDUINO_CORE)/Print.cpp \ -$(ARDUINO_CORE)/HardwareSerial.cpp \ -$(ARDUINO_LIB)/SPI/SPI.cpp \ -../../RF24.cpp - -CXX_APP = output/$(PROJECT_NAME).cpp -MODULES = $(C_MODULES) $(CXX_MODULES) -SRC = $(C_MODULES) -CXXSRC = $(CXX_MODULES) $(CXX_APP) -FORMAT = ihex - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -#DEBUG = stabs -DEBUG = - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) -CXXDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) - -# Place -I options here -CINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) -I$(PROJECT_DIR) -I$(ARDUINO_AVR) -I$(ARDUINO_LIB)/SPI -I../.. - -CXXINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -#CWARN = -Wall -Wstrict-prototypes -CWARN = -Wall # show all warnings -#CWARN = -w # suppress all warnings -CMAP = -Wl,-Map,output.map -####CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -CTUNING = -ffunction-sections -fdata-sections -CXXTUNING = -fno-exceptions -ffunction-sections -fdata-sections -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) -MMCU = -mmcu=$(MCU) - -CFLAGS = $(CDEBUG) -O$(OPT) $(CMAP) $(CWARN) $(CTUNING) $(MMCU) $(CDEFS) $(CINCS) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEBUG) -O$(OPT) $(CWARN) $(CXXTUNING) $(CDEFS) $(CINCS) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -O$(OPT) -lm -Wl,--gc-sections -#LDFLAGS = -O$(OPT) -lm -Wl,-Map,output/$(PROJECT_NAME).map - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:output/$(PROJECT_NAME).hex:i - -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf \ --p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -LD = $(AVR_TOOLS_PATH)/avr-gcc -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) -OBJ_MODULES = $(C_MODULES:.c=.o) $(CXX_MODULES:.cpp=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = $(CFLAGS) -mmcu=$(MCU) -ALL_CXXFLAGS = $(CXXFLAGS) -mmcu=$(MCU) -ALL_ASFLAGS = -x assembler-with-cpp $(ASFLAGS) -mmcu=$(MCU) -ALL_LDFLAGS = $(LDFLAGS) -mmcu=$(MCU) - -# Default target. -# This is th etarget that gets executed with a make command -# that has no parameters, ie "make". -all: applet_files build sym lss size upload - -build: elf hex - -output/$(PROJECT_NAME).cpp: $(PROJECT_NAME).pde - test -d output || mkdir output - echo "#include " > $@ - echo "#line 1 \"$<\"" >> $@ - cat $< >> $@ - -elf: output/$(PROJECT_NAME).elf -hex: output/$(PROJECT_NAME).hex -eep: output/$(PROJECT_NAME).eep -lss: output/$(PROJECT_NAME).lss -#sym: output/$(PROJECT_NAME).sym - -# Upload HEX file to Arduino -upload: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT) $(AVRDUDE_WRITE_FLASH) - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT2) $(AVRDUDE_WRITE_FLASH) - -sym: - $(NM) -n -C --format=posix output/$(PROJECT_NAME).elf > output/$(PROJECT_NAME).sym - -# Display size of file. -size: - $(SIZE) output/$(PROJECT_NAME).elf - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - -coff: output/$(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - - extcoff: $(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-ext-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - $(OBJCOPY) -O $(FORMAT) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --no-change-warnings \ - --change-section-lma .eeprom=0 $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Link: create ELF output file from library. -#output/$(PROJECT_NAME).elf: $(PROJECT_NAME).c output/core.a -output/$(PROJECT_NAME).elf: output/$(PROJECT_NAME).o output/core.a - $(LD) $(ALL_LDFLAGS) -o $@ output/$(PROJECT_NAME).o output/core.a - -output/core.a: $(OBJ_MODULES) - @for i in $(OBJ_MODULES); do echo $(AR) rcs output/core.a $$i; $(AR) rcs output/core.a $$i; done - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -# Target: clean project. -clean: - $(REMOVE) output/$(PROJECT_NAME).hex output/$(PROJECT_NAME).eep output/$(PROJECT_NAME).cof output/$(PROJECT_NAME).elf \ - output/$(PROJECT_NAME).map output/$(PROJECT_NAME).sym output/$(PROJECT_NAME).lss output/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -#.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter -.PHONY: all build elf hex eep lss sym program coff extcoff applet_files sizebefore sizeafter - -#include $(SRC:.c=.d) -#include $(CXXSRC:.cpp=.d) diff --git a/examples/pingpair_sleepy/printf.h b/examples/pingpair_sleepy/printf.h index 63501e4..df6c46a 100644 --- a/examples/pingpair_sleepy/printf.h +++ b/examples/pingpair_sleepy/printf.h @@ -18,7 +18,7 @@ #include "WProgram.h" -int serial_putc( char c, FILE *t ) +int serial_putc( char c, FILE * ) { Serial.write( c ); diff --git a/examples/scanner/Jamfile b/examples/scanner/Jamfile new file mode 100644 index 0000000..901f8da --- /dev/null +++ b/examples/scanner/Jamfile @@ -0,0 +1,206 @@ +PROJECT_NAME = $(PWD:B) ; +PROJECT_DIR = . ; +PROJECT_LIBS = SPI RF24 ; + +OUT_DIR = ojam ; +F_CPU = 16000000 ; +MCU = atmega328p ; +PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; + +UPLOAD_RATE = 57600 ; +AVRDUDE_PROTOCOL = stk500v1 ; +COM = 33 ; + +# Host-specific overrides for locations +if $(OS) = MACOSX +{ +ARDUINO_VERSION = 22 ; +OLD_DIR = /opt/arduino-0021 ; +AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; +AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; +ARDUINO_DIR = /opt/Arduino ; +ARDUINO_AVR = /usr/lib/avr/include ; +} + +# Where is everything? +ARDUINO_VERSION ?= 22 ; +AVR_TOOLS_PATH ?= /usr/bin ; +ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; +ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; +AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; +ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; +ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; +SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; +AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; +AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; + +DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; +CTUNING = -ffunction-sections -fdata-sections ; +CXXTUNING = -fno-exceptions -fno-strict-aliasing ; +CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; +CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; +LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; + +# Search everywhere for headers +HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; + +# Grab everything from the core directory +CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; + +# Grab everything from libraries. To avoid this "grab everything" behaviour, you +# can specify specific modules to pick up in PROJECT_MODULES +LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; + +# In addition to explicitly-specified program modules, pick up anything from the current +# dir. +PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; + +# Shortcut for the out files +OUT = $(OUT_DIR)/$(PROJECT_NAME) ; + +# AvrDude setup +AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; + +rule GitVersion +{ + Always $(<) ; + Depends all : $(<) ; +} + +actions GitVersion +{ + echo "const char program_version[] = \"\\" > $(<) + git log -1 --pretty=format:%h >> $(<) + echo "\";" >> $(<) +} + +GitVersion version.h ; + +rule AvrCc +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrCc +{ + $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) +} + +rule AvrC++ +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrC++ +{ + $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) +} + +rule Pde +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + +} + +actions Pde +{ + echo "#include " > $(<) + echo "#line 1 \"$(>)\"" >> $(<) + cat $(>) >> $(<) +} + +rule AvrPde +{ + local _CPP = $(OUT_DIR)/$(_I:B).cpp ; + Pde $(_CPP) : $(>) ; + AvrC++ $(<) : $(_CPP) ; +} + +rule AvrObject +{ + switch $(>:S) + { + case .c : AvrCc $(<) : $(>) ; + case .cpp : AvrC++ $(<) : $(>) ; + case .pde : AvrPde $(<) : $(>) ; + } +} + +rule AvrObjects +{ + for _I in $(<) + { + AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; + } +} + +rule AvrMainFromObjects +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + MkDir $(<:D) ; + Depends all : $(<) ; + Clean clean : $(<) ; +} + +actions AvrMainFromObjects +{ + $(AVR_LD) $(LDFLAGS) -o $(<) $(>) +} + +rule AvrMain +{ + AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; + AvrObjects $(>) ; +} + +rule AvrHex +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Depends hex : $(<) ; + Clean clean : $(<) ; +} + +actions AvrHex +{ + $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) +} + +rule AvrUpload +{ + Depends $(1) : $(2) ; + Depends $(2) : $(3) ; + NotFile $(1) ; + Always $(1) ; + Always $(2) ; + AvrUploadAction $(2) : $(3) ; +} + +actions AvrUploadAction +{ + $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i +} + +AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; +AvrHex $(OUT).hex : $(OUT).elf ; + +AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; +AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; +AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; + diff --git a/examples/scanner/makefile b/examples/scanner/makefile deleted file mode 100644 index 15cb43b..0000000 --- a/examples/scanner/makefile +++ /dev/null @@ -1,305 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# Modified by Kerry Wong to support NetBeans -# Modified by Rob Gray (Graynomad) for use with Windows and no IDE -# This works in my environment and I use it to program two different -# 328-based boards and a Mega2560. It's not necessarily robust and -# I may have broken something in the original file that I don't use. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment. -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. The project code file -# should have a .c extension however the file gets copied to a .cpp before -# compilation so you still write in C++. -# -# 2. Modify the lines between the double ### rows to set the paths -# comm ports etc for your system. EG. c:/progra~1/arduino/arduino-00 -# for the Arduino IDE, Note the use of short folder name, don't use -# "Program files" because spaces will break the build. -# -# Set the line containing "MCU" to match your board's processor. -# Typically ATmega328 or ATmega2560. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 3. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 4. Type "make" and press enter to compile/verify your program. -# The default make target will also perform the uplode using avrdude. -# -# The first time this is done all required libraries will be built -# and a core.a file will be created in the output folder. -# -# NOTES: -# All output goes into a folder called "output" underneath the working folder. -# The default all: target creates symbol (.sym) and expanded assembly -# (.lss) files and uploads the program. -# -# -########################################################## -########################################################## -# Select processor here -MCU = atmega328p -#MCU = atmega2560 - -ifeq ($(MCU),atmega2560) -UPLOAD_RATE = 115200 -AVRDUDE_PROTOCOL = stk500v2 -COM = 39 -endif - -ifeq ($(MCU),atmega328p) -UPLOAD_RATE = 57600 -AVRDUDE_PROTOCOL = stk500v1 -COM = 33 -endif - -UNAME := $(shell uname) - -ifeq ($(UNAME),Darwin) -ARDUINO_VERSION = 21 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(ARDUINO_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools/avr/etc -PORT = /dev/tty.usbserial-A600eHIs -PORT2 = /dev/tty.usbserial-A9007LmI -PORT3 = /dev/tty.usbserial-A40081RP -else -ARDUINO_VERSION = 22 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = /usr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools -PORT = /dev/ttyUSB0 -PORT2 = /dev/ttyUSB1 -endif - -# Temporary testing of github Arduino environment -OLD_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc -ARDUINO_DIR = /opt/Arduino - -PROJECT_NAME = $(notdir $(PWD)) -PROJECT_DIR = . -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_AVR = $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr -ARDUINO_LIB = $(ARDUINO_DIR)/libraries -F_CPU = 16000000 - -########################################################## -########################################################## - -# Note that if your program has dependencies other than those -# already listed below, you will need to add them accordingly. -C_MODULES = \ -$(ARDUINO_CORE)/wiring_pulse.c \ -$(ARDUINO_CORE)/wiring_analog.c \ -$(ARDUINO_CORE)/pins_arduino.c \ -$(ARDUINO_CORE)/wiring.c \ -$(ARDUINO_CORE)/wiring_digital.c \ -$(ARDUINO_CORE)/WInterrupts.c \ -$(ARDUINO_CORE)/wiring_shift.c \ - -CXX_MODULES = \ -$(ARDUINO_CORE)/Tone.cpp \ -$(ARDUINO_CORE)/main.cpp \ -$(ARDUINO_CORE)/WMath.cpp \ -$(ARDUINO_CORE)/Print.cpp \ -$(ARDUINO_CORE)/HardwareSerial.cpp \ -$(ARDUINO_LIB)/SPI/SPI.cpp \ -$(ARDUINO_LIB)/EEPROM/EEPROM.cpp \ -../../RF24.cpp - -CXX_APP = output/$(PROJECT_NAME).cpp -MODULES = $(C_MODULES) $(CXX_MODULES) -SRC = $(C_MODULES) -CXXSRC = $(CXX_MODULES) $(CXX_APP) -FORMAT = ihex - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -#DEBUG = stabs -DEBUG = - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) -CXXDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) - -# Place -I options here -CINCS = -I$(ARDUINO_LIB)/EEPROM -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) -I$(PROJECT_DIR) -I$(ARDUINO_AVR) -I$(ARDUINO_LIB)/SPI -I../.. - -CXXINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -#CWARN = -Wall -Wstrict-prototypes -CWARN = -Wall # show all warnings -#CWARN = -w # suppress all warnings -CMAP = -Wl,-Map,output.map -####CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -CTUNING = -ffunction-sections -fdata-sections -CXXTUNING = -fno-exceptions -ffunction-sections -fdata-sections -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) -MMCU = -mmcu=$(MCU) - -CFLAGS = $(CDEBUG) -O$(OPT) $(CMAP) $(CWARN) $(CTUNING) $(MMCU) $(CDEFS) $(CINCS) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEBUG) -O$(OPT) $(CWARN) $(CXXTUNING) $(CDEFS) $(CINCS) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -O$(OPT) -lm -Wl,--gc-sections -#LDFLAGS = -O$(OPT) -lm -Wl,-Map,output/$(PROJECT_NAME).map - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:output/$(PROJECT_NAME).hex:i - -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf \ --p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -LD = $(AVR_TOOLS_PATH)/avr-gcc -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) -OBJ_MODULES = $(C_MODULES:.c=.o) $(CXX_MODULES:.cpp=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = $(CFLAGS) -mmcu=$(MCU) -ALL_CXXFLAGS = $(CXXFLAGS) -mmcu=$(MCU) -ALL_ASFLAGS = -x assembler-with-cpp $(ASFLAGS) -mmcu=$(MCU) -ALL_LDFLAGS = $(LDFLAGS) -mmcu=$(MCU) - -# Default target. -# This is th etarget that gets executed with a make command -# that has no parameters, ie "make". -all: applet_files build sym lss size upload - -build: elf hex - -output/$(PROJECT_NAME).cpp: $(PROJECT_NAME).pde - test -d output || mkdir output - echo "#include " > $@ - echo "#line 1 \"$<\"" >> $@ - cat $< >> $@ - -elf: output/$(PROJECT_NAME).elf -hex: output/$(PROJECT_NAME).hex -eep: output/$(PROJECT_NAME).eep -lss: output/$(PROJECT_NAME).lss -#sym: output/$(PROJECT_NAME).sym - -# Upload HEX file to Arduino -upload: upload1 upload2 - -upload1: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT) $(AVRDUDE_WRITE_FLASH) - -upload2: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT2) $(AVRDUDE_WRITE_FLASH) - -upload3: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT3) $(AVRDUDE_WRITE_FLASH) - -sym: - $(NM) -n -C --format=posix output/$(PROJECT_NAME).elf > output/$(PROJECT_NAME).sym - -# Display size of file. -size: - $(SIZE) output/$(PROJECT_NAME).elf - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - -coff: output/$(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - - extcoff: $(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-ext-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - $(OBJCOPY) -O $(FORMAT) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --no-change-warnings \ - --change-section-lma .eeprom=0 $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Link: create ELF output file from library. -#output/$(PROJECT_NAME).elf: $(PROJECT_NAME).c output/core.a -output/$(PROJECT_NAME).elf: output/$(PROJECT_NAME).o output/core.a - $(LD) $(ALL_LDFLAGS) -o $@ output/$(PROJECT_NAME).o output/core.a - -output/core.a: $(OBJ_MODULES) - @for i in $(OBJ_MODULES); do echo $(AR) rcs output/core.a $$i; $(AR) rcs output/core.a $$i; done - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -# Target: clean project. -clean: - $(REMOVE) output/$(PROJECT_NAME).hex output/$(PROJECT_NAME).eep output/$(PROJECT_NAME).cof output/$(PROJECT_NAME).elf \ - output/$(PROJECT_NAME).map output/$(PROJECT_NAME).sym output/$(PROJECT_NAME).lss output/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -#.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter -.PHONY: all build elf hex eep lss sym program coff extcoff applet_files sizebefore sizeafter - -#include $(SRC:.c=.d) -#include $(CXXSRC:.cpp=.d) diff --git a/examples/scanner/printf.h b/examples/scanner/printf.h index 63501e4..df6c46a 100644 --- a/examples/scanner/printf.h +++ b/examples/scanner/printf.h @@ -18,7 +18,7 @@ #include "WProgram.h" -int serial_putc( char c, FILE *t ) +int serial_putc( char c, FILE * ) { Serial.write( c ); diff --git a/examples/starping/Jamfile b/examples/starping/Jamfile new file mode 100644 index 0000000..de9b1f6 --- /dev/null +++ b/examples/starping/Jamfile @@ -0,0 +1,206 @@ +PROJECT_NAME = $(PWD:B) ; +PROJECT_DIR = . ; +PROJECT_LIBS = EEPROM SPI RF24 ; + +OUT_DIR = ojam ; +F_CPU = 16000000 ; +MCU = atmega328p ; +PORTS = /dev/tty.usbserial-A600eHIs /dev/tty.usbserial-A40081RP /dev/tty.usbserial-A9007LmI ; + +UPLOAD_RATE = 57600 ; +AVRDUDE_PROTOCOL = stk500v1 ; +COM = 33 ; + +# Host-specific overrides for locations +if $(OS) = MACOSX +{ +ARDUINO_VERSION = 22 ; +OLD_DIR = /opt/arduino-0021 ; +AVR_TOOLS_PATH = $(OLD_DIR)/hardware/tools/avr/bin ; +AVRDUDECONFIG_PATH = $(OLD_DIR)/hardware/tools/avr/etc ; +ARDUINO_DIR = /opt/Arduino ; +ARDUINO_AVR = /usr/lib/avr/include ; +} + +# Where is everything? +ARDUINO_VERSION ?= 22 ; +AVR_TOOLS_PATH ?= /usr/bin ; +ARDUINO_DIR ?= /opt/arduino-00$(ARDUINO_VERSION) ; +ARDUINO_AVR ?= $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr ; +AVRDUDECONFIG_PATH ?= $(ARDUINO_DIR)/hardware/tools ; +ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino ; +ARDUINO_LIB = $(ARDUINO_DIR)/libraries ; +SKETCH_LIB = $(HOME)/Source/Arduino/libraries ; +AVR_CC = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_CXX = $(AVR_TOOLS_PATH)/avr-g++ ; +AVR_LD = $(AVR_TOOLS_PATH)/avr-gcc ; +AVR_OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy ; +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude ; + +DEFINES = F_CPU=$(F_CPU)L ARDUINO=$(ARDUINO_VERSION) VERSION_H ; +CTUNING = -ffunction-sections -fdata-sections ; +CXXTUNING = -fno-exceptions -fno-strict-aliasing ; +CFLAGS = -Os -Wall -Wextra -mmcu=$(MCU) $(CTUNING) ; +CXXFLAGS = $(CFLAGS) $(CXXTUNING) ; +LDFLAGS = -Os -lm -Wl,--gc-sections -mmcu=atmega328p ; + +# Search everywhere for headers +HDRS = $(PROJECT_DIR) $(ARDUINO_AVR) $(ARDUINO_CORE) [ GLOB $(ARDUINO_LIB) $(SKETCH_LIB) : [^.]* ] ; + +# Grab everything from the core directory +CORE_MODULES = [ GLOB $(ARDUINO_CORE) : *.c *.cpp ] ; + +# Grab everything from libraries. To avoid this "grab everything" behaviour, you +# can specify specific modules to pick up in PROJECT_MODULES +LIB_MODULES = [ GLOB $(ARDUINO_LIB)/$(PROJECT_LIBS) $(SKETCH_LIB)/$(PROJECT_LIBS) : *.cpp ] ; + +# In addition to explicitly-specified program modules, pick up anything from the current +# dir. +PROJECT_MODULES += [ GLOB $(PROJECT_DIR) : *.c *.cpp *.pde ] ; + +# Shortcut for the out files +OUT = $(OUT_DIR)/$(PROJECT_NAME) ; + +# AvrDude setup +AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf -p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) ; + +rule GitVersion +{ + Always $(<) ; + Depends all : $(<) ; +} + +actions GitVersion +{ + echo "const char program_version[] = \"\\" > $(<) + git log -1 --pretty=format:%h >> $(<) + echo "\";" >> $(<) +} + +GitVersion version.h ; + +rule AvrCc +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrCc +{ + $(AVR_CC) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CFLAGS) $(>) +} + +rule AvrC++ +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + + CCHDRS on $(<) = [ on $(<) FIncludes $(HDRS) ] ; + CCDEFS on $(<) = [ on $(<) FDefines $(DEFINES) ] ; +} + +actions AvrC++ +{ + $(AVR_CXX) -c -o $(<) $(CCHDRS) $(CCDEFS) $(CXXFLAGS) $(>) +} + +rule Pde +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Clean clean : $(<) ; + +} + +actions Pde +{ + echo "#include " > $(<) + echo "#line 1 \"$(>)\"" >> $(<) + cat $(>) >> $(<) +} + +rule AvrPde +{ + local _CPP = $(OUT_DIR)/$(_I:B).cpp ; + Pde $(_CPP) : $(>) ; + AvrC++ $(<) : $(_CPP) ; +} + +rule AvrObject +{ + switch $(>:S) + { + case .c : AvrCc $(<) : $(>) ; + case .cpp : AvrC++ $(<) : $(>) ; + case .pde : AvrPde $(<) : $(>) ; + } +} + +rule AvrObjects +{ + for _I in $(<) + { + AvrObject $(OUT_DIR)/$(_I:B).o : $(_I) ; + } +} + +rule AvrMainFromObjects +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + MkDir $(<:D) ; + Depends all : $(<) ; + Clean clean : $(<) ; +} + +actions AvrMainFromObjects +{ + $(AVR_LD) $(LDFLAGS) -o $(<) $(>) +} + +rule AvrMain +{ + AvrMainFromObjects $(<) : $(OUT_DIR)/$(>:B).o ; + AvrObjects $(>) ; +} + +rule AvrHex +{ + Depends $(<) : $(>) ; + Depends $(<) : $(<:D) ; + Depends hex : $(<) ; + Clean clean : $(<) ; +} + +actions AvrHex +{ + $(AVR_OBJCOPY) -O ihex -R .eeprom $(>) $(<) +} + +rule AvrUpload +{ + Depends $(1) : $(2) ; + Depends $(2) : $(3) ; + NotFile $(1) ; + Always $(1) ; + Always $(2) ; + AvrUploadAction $(2) : $(3) ; +} + +actions AvrUploadAction +{ + $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(<) $(AVRDUDE_WRITE_FLASH) -U flash:w:$(>):i +} + +AvrMain $(OUT).elf : $(CORE_MODULES) $(LIB_MODULES) $(PROJECT_MODULES) ; +AvrHex $(OUT).hex : $(OUT).elf ; + +AvrUpload p6 : /dev/tty.usbserial-A600eHIs : $(OUT).hex ; +AvrUpload p4 : /dev/tty.usbserial-A40081RP : $(OUT).hex ; +AvrUpload p9 : /dev/tty.usbserial-A9007LmI : $(OUT).hex ; + diff --git a/examples/starping/makefile b/examples/starping/makefile deleted file mode 100644 index 2ea7538..0000000 --- a/examples/starping/makefile +++ /dev/null @@ -1,295 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# Modified by Kerry Wong to support NetBeans -# Modified by Rob Gray (Graynomad) for use with Windows and no IDE -# This works in my environment and I use it to program two different -# 328-based boards and a Mega2560. It's not necessarily robust and -# I may have broken something in the original file that I don't use. -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment. -# -# Instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. The project code file -# should have a .c extension however the file gets copied to a .cpp before -# compilation so you still write in C++. -# -# 2. Modify the lines between the double ### rows to set the paths -# comm ports etc for your system. EG. c:/progra~1/arduino/arduino-00 -# for the Arduino IDE, Note the use of short folder name, don't use -# "Program files" because spaces will break the build. -# -# Set the line containing "MCU" to match your board's processor. -# Typically ATmega328 or ATmega2560. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 3. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 4. Type "make" and press enter to compile/verify your program. -# The default make target will also perform the uplode using avrdude. -# -# The first time this is done all required libraries will be built -# and a core.a file will be created in the output folder. -# -# NOTES: -# All output goes into a folder called "output" underneath the working folder. -# The default all: target creates symbol (.sym) and expanded assembly -# (.lss) files and uploads the program. -# -# -########################################################## -########################################################## -# Select processor here -MCU = atmega328p -#MCU = atmega2560 - -ifeq ($(MCU),atmega2560) -UPLOAD_RATE = 115200 -AVRDUDE_PROTOCOL = stk500v2 -COM = 39 -endif - -ifeq ($(MCU),atmega328p) -UPLOAD_RATE = 57600 -AVRDUDE_PROTOCOL = stk500v1 -COM = 33 -endif - -UNAME := $(shell uname) - -ifeq ($(UNAME),Darwin) -ARDUINO_VERSION = 21 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = $(ARDUINO_DIR)/hardware/tools/avr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools/avr/etc -PORT = /dev/tty.usbserial-A600eHIs -PORT2 = /dev/tty.usbserial-A9007LmI -else -ARDUINO_VERSION = 22 -ARDUINO_DIR = /opt/arduino-00$(ARDUINO_VERSION) -AVR_TOOLS_PATH = /usr/bin -AVRDUDECONFIG_PATH = $(ARDUINO_DIR)/hardware/tools -PORT = /dev/ttyUSB0 -PORT2 = /dev/ttyUSB1 -endif - -PROJECT_NAME = $(notdir $(PWD)) -PROJECT_DIR = . -ARDUINO_CORE = $(ARDUINO_DIR)/hardware/arduino/cores/arduino -ARDUINO_AVR = $(ARDUINO_DIR)/hardware/tools/avr/avr/include/avr -ARDUINO_LIB = $(ARDUINO_DIR)/libraries -F_CPU = 16000000 - -########################################################## -########################################################## - -# Note that if your program has dependencies other than those -# already listed below, you will need to add them accordingly. -C_MODULES = \ -$(ARDUINO_CORE)/wiring_pulse.c \ -$(ARDUINO_CORE)/wiring_analog.c \ -$(ARDUINO_CORE)/pins_arduino.c \ -$(ARDUINO_CORE)/wiring.c \ -$(ARDUINO_CORE)/wiring_digital.c \ -$(ARDUINO_CORE)/WInterrupts.c \ -$(ARDUINO_CORE)/wiring_shift.c \ - -CXX_MODULES = \ -$(ARDUINO_CORE)/Tone.cpp \ -$(ARDUINO_CORE)/main.cpp \ -$(ARDUINO_CORE)/WMath.cpp \ -$(ARDUINO_CORE)/Print.cpp \ -$(ARDUINO_CORE)/HardwareSerial.cpp \ -$(ARDUINO_LIB)/SPI/SPI.cpp \ -$(ARDUINO_LIB)/EEPROM/EEPROM.cpp \ -../../RF24.cpp - -CXX_APP = output/$(PROJECT_NAME).cpp -MODULES = $(C_MODULES) $(CXX_MODULES) -SRC = $(C_MODULES) -CXXSRC = $(CXX_MODULES) $(CXX_APP) -FORMAT = ihex - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -#DEBUG = stabs -DEBUG = - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) -CXXDEFS = -DF_CPU=$(F_CPU)L -DARDUINO=$(ARDUINO_VERSION) - -# Place -I options here -CINCS = -I$(ARDUINO_LIB)/EEPROM -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) -I$(PROJECT_DIR) -I$(ARDUINO_AVR) -I$(ARDUINO_LIB)/SPI -I../.. - -CXXINCS = -I$(ARDUINO_CORE) -I$(ARDUINO_LIB) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -#CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -#CWARN = -Wall -Wstrict-prototypes -CWARN = -Wall # show all warnings -#CWARN = -w # suppress all warnings -CMAP = -Wl,-Map,output.map -####CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -CTUNING = -ffunction-sections -fdata-sections -CXXTUNING = -fno-exceptions -ffunction-sections -fdata-sections -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) -MMCU = -mmcu=$(MCU) - -CFLAGS = $(CDEBUG) -O$(OPT) $(CMAP) $(CWARN) $(CTUNING) $(MMCU) $(CDEFS) $(CINCS) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEBUG) -O$(OPT) $(CWARN) $(CXXTUNING) $(CDEFS) $(CINCS) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -O$(OPT) -lm -Wl,--gc-sections -#LDFLAGS = -O$(OPT) -lm -Wl,-Map,output/$(PROJECT_NAME).map - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:output/$(PROJECT_NAME).hex:i - -AVRDUDE_FLAGS = -V -F -D -C $(AVRDUDECONFIG_PATH)/avrdude.conf \ --p $(MCU) -c $(AVRDUDE_PROTOCOL) -b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -LD = $(AVR_TOOLS_PATH)/avr-gcc -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) -OBJ_MODULES = $(C_MODULES:.c=.o) $(CXX_MODULES:.cpp=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = $(CFLAGS) -mmcu=$(MCU) -ALL_CXXFLAGS = $(CXXFLAGS) -mmcu=$(MCU) -ALL_ASFLAGS = -x assembler-with-cpp $(ASFLAGS) -mmcu=$(MCU) -ALL_LDFLAGS = $(LDFLAGS) -mmcu=$(MCU) - -# Default target. -# This is th etarget that gets executed with a make command -# that has no parameters, ie "make". -all: applet_files build sym lss size upload - -build: elf hex - -output/$(PROJECT_NAME).cpp: $(PROJECT_NAME).pde - test -d output || mkdir output - echo "#include " > $@ - echo "#line 1 \"$<\"" >> $@ - cat $< >> $@ - -elf: output/$(PROJECT_NAME).elf -hex: output/$(PROJECT_NAME).hex -eep: output/$(PROJECT_NAME).eep -lss: output/$(PROJECT_NAME).lss -#sym: output/$(PROJECT_NAME).sym - -# Upload HEX file to Arduino -upload: upload1 upload2 - -upload1: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT) $(AVRDUDE_WRITE_FLASH) - -upload2: output/$(PROJECT_NAME).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -P $(PORT2) $(AVRDUDE_WRITE_FLASH) - -sym: - $(NM) -n -C --format=posix output/$(PROJECT_NAME).elf > output/$(PROJECT_NAME).sym - -# Display size of file. -size: - $(SIZE) output/$(PROJECT_NAME).elf - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - -coff: output/$(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - - extcoff: $(PROJECT_NAME).elf - $(COFFCONVERT) -O coff-ext-avr output/$(PROJECT_NAME).elf $(PROJECT_NAME).cof - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - $(OBJCOPY) -O $(FORMAT) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --no-change-warnings \ - --change-section-lma .eeprom=0 $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Link: create ELF output file from library. -#output/$(PROJECT_NAME).elf: $(PROJECT_NAME).c output/core.a -output/$(PROJECT_NAME).elf: output/$(PROJECT_NAME).o output/core.a - $(LD) $(ALL_LDFLAGS) -o $@ output/$(PROJECT_NAME).o output/core.a - -output/core.a: $(OBJ_MODULES) - @for i in $(OBJ_MODULES); do echo $(AR) rcs output/core.a $$i; $(AR) rcs output/core.a $$i; done - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -# Target: clean project. -clean: - $(REMOVE) output/$(PROJECT_NAME).hex output/$(PROJECT_NAME).eep output/$(PROJECT_NAME).cof output/$(PROJECT_NAME).elf \ - output/$(PROJECT_NAME).map output/$(PROJECT_NAME).sym output/$(PROJECT_NAME).lss output/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -#.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter -.PHONY: all build elf hex eep lss sym program coff extcoff applet_files sizebefore sizeafter - -#include $(SRC:.c=.d) -#include $(CXXSRC:.cpp=.d) diff --git a/examples/starping/printf.h b/examples/starping/printf.h index 63501e4..df6c46a 100644 --- a/examples/starping/printf.h +++ b/examples/starping/printf.h @@ -18,7 +18,7 @@ #include "WProgram.h" -int serial_putc( char c, FILE *t ) +int serial_putc( char c, FILE * ) { Serial.write( c ); diff --git a/examples/starping/starping.pde b/examples/starping/starping.pde index e887aeb..1d02bcd 100644 --- a/examples/starping/starping.pde +++ b/examples/starping/starping.pde @@ -286,7 +286,7 @@ void loop(void) // And we are done right now (no easy way to soft reset) printf("\n\rManually reset address to: %c\n\rPress RESET to continue!",c); - while(1); + while(1) ; } } }