rf24-pio/RF24.h

302 lines
7.9 KiB
C
Raw Normal View History

2011-03-19 03:32:34 +00:00
/*
Copyright (C) 2011 James Coliz, Jr. <maniacbug@ymail.com>
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
version 2 as published by the Free Software Foundation.
*/
#ifndef __RF24_H__
#define __RF24_H__
#include <inttypes.h>
/**
* Driver for nRF24L01 2.4GHz Wireless Transceiver
*
* See <a href="http://www.nordicsemi.com/files/Product/data_sheet/nRF24L01_Product_Specification_v2_0.pdf">Datasheet</a>
*
* This chip uses the SPI bus, plus two chip control pins. Remember that pin 10 must still remain an output, or
* the SPI hardware will go into 'slave' mode.
*
* Design Goals: This library is designed to be...
* * Maximally compliant with the intended operation of the chip
* * Easy for beginners to use
* * Consumed with a public interface that's similiar to other Arduino standard libraries
* * Built against the standard SPI library.
*/
class RF24
{
private:
int ce_pin; /**< "Chip Enable" pin, activates the RX or TX role */
int csn_pin; /**< SPI Chip select */
int payload_size; /**< Fixed size of payloads */
protected:
/**
* @name Low-level internal interface.
*
* Protected methods that address the chip directly.
*/
/**@{*/
/**
* Set chip select pin
*
* @param mode HIGH to take this unit off the SPI bus, LOW to put it on
*/
void csn(int mode) ;
/**
* Set chip enable
*
* @param mode HIGH to actively begin transmission or LOW to put in standby. Please see data sheet
* for a much more detailed description of this pin.
*/
void ce(int mode);
/**
* Read a chunk of data in from a register
*
* @param reg Which register. Use constants from nRF24L01.h
* @param buf Where to put the data
* @param len How many bytes of data to transfer
* @return Current value of status register
*/
uint8_t read_register(uint8_t reg, uint8_t* buf, uint8_t len) ;
/**
* Write a chunk of data to a register
*
* @param reg Which register. Use constants from nRF24L01.h
* @param buf Where to get the data
* @param len How many bytes of data to transfer
* @return Current value of status register
*/
uint8_t write_register(uint8_t reg, const uint8_t* buf, uint8_t len);
/**
* Write a single byte to a register
*
* @param reg Which register. Use constants from nRF24L01.h
* @param value The new value to write
* @return Current value of status register
*/
uint8_t write_register(uint8_t reg, uint8_t value);
/**
* Write the transmit payload
*
* The size of data written is the fixed payload size, see getPayloadSize()
*
* @param buf Where to get the data
* @return Current value of status register
*/
uint8_t write_payload(const void* buf);
/**
* Read the receive payload
*
* The size of data read is the fixed payload size, see getPayloadSize()
*
* @param buf Where to put the data
* @return Current value of status register
*/
uint8_t read_payload(void* buf) ;
/**
* Empty the receive buffer
*
* @return Current value of status register
*/
uint8_t flush_rx(void);
/**
* Empty the transmit buffer
*
* @return Current value of status register
*/
uint8_t flush_tx(void);
/**
* Retrieve the current status of the chip
*
* @return Current value of status register
*/
uint8_t get_status(void) ;
/**
* Decode and print the given status to stdout
*
* @param status Status value to print
*
* @warning Does nothing if stdout is not defined. See fdevopen in stdio.h
*/
void print_status(uint8_t status) ;
/**
* Decode and print the given 'observe_tx' value to stdout
*
2011-03-19 06:52:20 +00:00
* @param value The observe_tx value to print
2011-03-19 03:32:34 +00:00
*
* @warning Does nothing if stdout is not defined. See fdevopen in stdio.h
*/
void print_observe_tx(uint8_t value) ;
/**@}*/
public:
/**
* Constructor
2011-03-19 06:52:20 +00:00
*
* Creates a new instance of this driver. Before using, you create an instance
* and send in the unique pins that this chip is connected to.
2011-03-19 03:32:34 +00:00
*
* @param _cepin The pin attached to Chip Enable on the RF module
* @param _cspin The pin attached to Chip Select
*/
RF24(int _cepin, int _cspin);
/**
* Begin operation of the chip
*
* Call this in setup(), before calling any other methods.
*/
void begin(void);
/**
* Set RF communication channel
*
* @param channel Which RF channel to communicate on, 0-127
*/
void setChannel(int channel);
/**
* Set Payload Size
*
* This implementation uses a pre-stablished fixed payload size for all
* transmissions.
*
* @todo Implement variable-sized payloads feature
*
* @param size The number of bytes in the payload
*/
void setPayloadSize(uint8_t size);
/**
* Get Payload Size
*
* @see setPayloadSize()
*
* @return The number of bytes in the payload
*/
uint8_t getPayloadSize(void) ;
/**
* Print a giant block of debugging information to stdout
*
* @warning Does nothing if stdout is not defined. See fdevopen in stdio.h
*/
void print_details(void) ;
/**
* Start listening on the pipes opened for reading.
*
* Be sure to open some pipes for reading first. Do not call 'write'
* while in this mode, without first calling 'stopListening'.
*/
void startListening(void);
/**
* Stop listening for incoming messages
*
* Necessary to do this before writing.
*/
void stopListening(void);
/**
* Write to the open writing pipe
*
* This blocks until the message is successfully acknowledged by
* the receiver or the timeout/retransmit maxima are reached. In
* the current configuration, the max delay here is 60ms.
*
* The size of data written is the fixed payload size, see getPayloadSize()
*
* @param buf Pointer to the data to be sent
* @return True if the payload was delivered successfully false if not
*/
boolean write( const void* buf );
/**
* Test whether there are bytes available to be read
*
* @return True if there is a payload available, false if none is
*/
boolean available(void) ;
/**
* Read the payload
*
* Return the last payload received
*
* The size of data read is the fixed payload size, see getPayloadSize()
*
* @todo Indicate which pipe it came from
*
* @note I specifically chose 'void*' as a data type to make it easier
* for beginners to use. No casting needed.
*
* @param buf Pointer to a buffer where the data should be written
* @return True if the payload was delivered successfully false if not
*/
boolean read( void* buf ) ;
/**
* Open a pipe for writing
*
* Only one pipe can be open at once, but you can change the pipe
* you'll listen to. Do not call this while actively listening.
* Remember to stopListening() first.
*
* Addresses are 40-bit hex values, e.g.:
2011-03-19 06:52:20 +00:00
*
2011-03-19 03:32:34 +00:00
* @code
* openWritingPipe(0xF0F0F0F0F0);
* @endcode
*
2011-03-19 06:52:20 +00:00
* @param address The 40-bit address of the pipe to open. This can be
2011-03-19 03:32:34 +00:00
* any value whatsoever, as long as you are the only one writing to it
* and only one other radio is listening to it. Coordinate these pipe
* addresses amongst nodes on the network.
*/
void openWritingPipe(uint64_t address);
/**
* Open a pipe for reading
*
* Up to 5 pipes can be open for reading at once. Open all the
* reading pipes, and then call startListening().
*
* @see openWritingPipe
*
* @warning all 5 reading pipes should share the first 32 bits.
* Only the least significant byte should be unique, e.g.
2011-03-19 06:52:20 +00:00
*
2011-03-19 03:32:34 +00:00
* @code
* openReadingPipe(0xF0F0F0F0AA);
* openReadingPipe(0xF0F0F0F066);
* @endcode
*
* @todo Enforce the restriction that all pipes must share the top 32 bits
*
* @param number Which pipe# to open, 1-5.
* @param address The 40-bit address of the pipe to open.
*/
void openReadingPipe(uint8_t number, uint64_t address);
};
#endif // __RF24_H__