253 lines
7.1 KiB
C
253 lines
7.1 KiB
C
/*
|
|
* This file is part of the stmbl project.
|
|
*
|
|
* Copyright (C) 2013-2018 Rene Hopf <renehopf@mac.com>
|
|
* Copyright (C) 2013-2018 Nico Stute <crinq@crinq.de>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "stm32f1xx_hal.h"
|
|
#include "defines.h"
|
|
#include "setup.h"
|
|
#include "config.h"
|
|
|
|
void SystemClock_Config(void);
|
|
|
|
int cmd1;
|
|
int cmd2;
|
|
int cmd3;
|
|
|
|
int steer;
|
|
int speed;
|
|
|
|
extern TIM_HandleTypeDef htim_left;
|
|
extern TIM_HandleTypeDef htim_right;
|
|
extern ADC_HandleTypeDef hadc1;
|
|
extern ADC_HandleTypeDef hadc2;
|
|
extern volatile adc_buf_t adc_buffer;
|
|
#ifdef CONTROL_PPM
|
|
extern volatile uint16_t ppm_captured_value[PPM_NUM_CHANNELS+1];
|
|
#endif
|
|
|
|
extern volatile int pwml;
|
|
extern volatile int pwmr;
|
|
extern volatile int weakl;
|
|
extern volatile int weakr;
|
|
|
|
volatile int pwmrl = 0;
|
|
|
|
extern uint8_t buzzerFreq;
|
|
extern uint8_t buzzerPattern;
|
|
|
|
extern uint8_t enable;
|
|
|
|
extern volatile uint32_t timeout;
|
|
|
|
extern float batteryVoltage;
|
|
extern uint8_t nunchuck_data[6];
|
|
|
|
|
|
int milli_vel_error_sum = 0;
|
|
|
|
int main(void) {
|
|
HAL_Init();
|
|
__HAL_RCC_AFIO_CLK_ENABLE();
|
|
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
|
/* System interrupt init*/
|
|
/* MemoryManagement_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
|
|
/* BusFault_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
|
|
/* UsageFault_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
|
|
/* SVCall_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0);
|
|
/* DebugMonitor_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
|
|
/* PendSV_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(PendSV_IRQn, 0, 0);
|
|
/* SysTick_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
|
|
|
SystemClock_Config();
|
|
|
|
__HAL_RCC_DMA1_CLK_DISABLE();
|
|
MX_GPIO_Init();
|
|
MX_TIM_Init();
|
|
MX_ADC1_Init();
|
|
MX_ADC2_Init();
|
|
UART_Init();
|
|
|
|
HAL_GPIO_WritePin(OFF_PORT, OFF_PIN, 1);
|
|
|
|
HAL_ADC_Start(&hadc1);
|
|
HAL_ADC_Start(&hadc2);
|
|
|
|
for (int i = 8; i >= 0; i--) {
|
|
buzzerFreq = i;
|
|
HAL_Delay(100);
|
|
}
|
|
buzzerFreq = 0;
|
|
|
|
HAL_GPIO_WritePin(LED_PORT, LED_PIN, 1);
|
|
|
|
int lastSpeedL = 0, lastSpeedR = 0;
|
|
int speedL = 0, speedR = 0;
|
|
float direction = 1;
|
|
|
|
#ifdef CONTROL_PPM
|
|
PPM_Init();
|
|
#endif
|
|
|
|
#ifdef CONTROL_NUNCHUCK
|
|
I2C_Init();
|
|
Nunchuck_Init();
|
|
#endif
|
|
|
|
enable = 1;
|
|
|
|
while(1) {
|
|
HAL_Delay(2);
|
|
|
|
#ifdef CONTROL_NUNCHUCK
|
|
Nunchuck_Read();
|
|
cmd1 = CLAMP((nunchuck_data[0] - 127) * 8, -1000, 1000); // x - axis. Nunchuck joystick readings range 30 - 230
|
|
cmd2 = CLAMP((nunchuck_data[1] - 128) * 8, -1000, 1000); // y - axis
|
|
|
|
//uint8_t button1 = (uint8_t)nunchuck_data[5] & 1;
|
|
//uint8_t button2 = (uint8_t)(nunchuck_data[5] >> 1) & 1;
|
|
#endif
|
|
|
|
#ifdef CONTROL_PPM
|
|
cmd1 = CLAMP((ppm_captured_value[0] - 500) * 2, -1000, 1000);
|
|
cmd2 = CLAMP((ppm_captured_value[1] - 500) * 2, -1000, 1000);
|
|
#endif
|
|
|
|
#ifdef CONTROL_ADC
|
|
cmd1 = CLAMP(adc_buffer.l_rx2 - 700, 0, 2350) / 2.35; // ADC values range 0-4095, however full range of our poti only covers 650 - 3050
|
|
uint8_t button1 = (uint8_t)(adc_buffer.l_tx2 > 2000);
|
|
|
|
timeout = 0;
|
|
#endif
|
|
|
|
// ####### LOW-PASS FILTER #######
|
|
steer = steer * (1.0 - FILTER) + cmd1 * FILTER;
|
|
speed = speed * (1.0 - FILTER) + cmd2 * FILTER;
|
|
|
|
setScopeChannel(0, (int)speed);
|
|
setScopeChannel(1, (int)steer);
|
|
|
|
// ####### MIXER #######
|
|
speedR = CLAMP(speed * SPEED_COEFFICIENT - steer * STEER_COEFFICIENT, -1000, 1000);
|
|
speedL = CLAMP(speed * SPEED_COEFFICIENT + steer * STEER_COEFFICIENT, -1000, 1000);
|
|
|
|
setScopeChannel(2, (int)speedR);
|
|
setScopeChannel(3, (int)timeout);
|
|
|
|
// ####### ADDITIONAL CODE #######
|
|
#ifdef ADDITIONAL_CODE
|
|
ADDITIONAL_CODE;
|
|
#endif
|
|
|
|
// ####### SET OUTPUTS #######
|
|
if ((speedL < lastSpeedL + 50 && speedL > lastSpeedL - 50) && (speedR < lastSpeedR + 50 && speedR > lastSpeedR - 50) && timeout < TIMEOUT) {
|
|
pwmr = speedR;
|
|
pwml = -speedL;
|
|
}
|
|
|
|
lastSpeedL = speedL;
|
|
lastSpeedR = speedR;
|
|
|
|
// ####### LOG TO CONSOLE #######
|
|
consoleScope();
|
|
|
|
if (HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) {
|
|
enable = 0;
|
|
while (HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) {}
|
|
buzzerFreq = 0;
|
|
buzzerPattern = 0;
|
|
for (int i = 0; i < 8; i++) {
|
|
buzzerFreq = i;
|
|
HAL_Delay(100);
|
|
}
|
|
HAL_GPIO_WritePin(OFF_PORT, OFF_PIN, 0);
|
|
while(1) {}
|
|
}
|
|
|
|
if (batteryVoltage < BAT_LOW_LVL1 && batteryVoltage > BAT_LOW_LVL2) {
|
|
buzzerFreq = 5;
|
|
buzzerPattern = 8;
|
|
} else if (batteryVoltage < BAT_LOW_LVL2 && batteryVoltage > BAT_LOW_DEAD) {
|
|
buzzerFreq = 5;
|
|
buzzerPattern = 1;
|
|
} else if (batteryVoltage < BAT_LOW_DEAD) {
|
|
buzzerPattern = 0;
|
|
enable = 0;
|
|
for (int i = 0; i < 8; i++) {
|
|
buzzerFreq = i;
|
|
HAL_Delay(100);
|
|
}
|
|
HAL_GPIO_WritePin(OFF_PORT, OFF_PIN, 0);
|
|
while(1) {}
|
|
} else {
|
|
buzzerFreq = 0;
|
|
buzzerPattern = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/** System Clock Configuration
|
|
*/
|
|
void SystemClock_Config(void) {
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInit;
|
|
|
|
/**Initializes the CPU, AHB and APB busses clocks
|
|
*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
|
RCC_OscInitStruct.HSICalibrationValue = 16;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
|
|
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
|
|
/**Initializes the CPU, AHB and APB busses clocks
|
|
*/
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
|
|
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
|
|
|
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
|
|
PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV8;
|
|
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
|
|
|
|
/**Configure the Systick interrupt time
|
|
*/
|
|
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
|
|
|
|
/**Configure the Systick
|
|
*/
|
|
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
|
|
|
|
/* SysTick_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
|
}
|