1703 lines
54 KiB
C
1703 lines
54 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_can.c
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief CAN HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Controller Area Network (CAN) peripheral:
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral Control functions
|
|
* + Peripheral State and Error functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
(#) Enable the CAN controller interface clock using
|
|
__HAL_RCC_CAN1_CLK_ENABLE() for CAN1 and __HAL_RCC_CAN2_CLK_ENABLE() for CAN2
|
|
-@- In case you are using CAN2 only, you have to enable the CAN1 clock.
|
|
|
|
(#) CAN pins configuration
|
|
(++) Enable the clock for the CAN GPIOs using the following function:
|
|
__HAL_RCC_GPIOx_CLK_ENABLE();
|
|
(++) Connect and configure the involved CAN pins using the
|
|
following function HAL_GPIO_Init();
|
|
|
|
(#) Initialize and configure the CAN using HAL_CAN_Init() function.
|
|
|
|
(#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
|
|
|
|
(#) Or transmit the desired CAN frame using HAL_CAN_Transmit_IT() function.
|
|
|
|
(#) Receive a CAN frame using HAL_CAN_Receive() function.
|
|
|
|
(#) Or receive a CAN frame using HAL_CAN_Receive_IT() function.
|
|
|
|
*** Polling mode IO operation ***
|
|
=================================
|
|
[..]
|
|
(+) Start the CAN peripheral transmission and wait the end of this operation
|
|
using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
|
|
according to his end application
|
|
(+) Start the CAN peripheral reception and wait the end of this operation
|
|
using HAL_CAN_Receive(), at this stage user can specify the value of timeout
|
|
according to his end application
|
|
|
|
*** Interrupt mode IO operation ***
|
|
===================================
|
|
[..]
|
|
(+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
|
|
(+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()
|
|
(+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
|
|
(+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can
|
|
add his own code by customization of function pointer HAL_CAN_TxCpltCallback
|
|
(+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer HAL_CAN_ErrorCallback
|
|
|
|
*** CAN HAL driver macros list ***
|
|
=============================================
|
|
[..]
|
|
Below the list of most used macros in CAN HAL driver.
|
|
|
|
(+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
|
|
(+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
|
|
(+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
|
|
(+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
|
|
(+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
|
|
|
|
[..]
|
|
(@) You can refer to the CAN HAL driver header file for more useful macros
|
|
|
|
@endverbatim
|
|
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup CAN CAN
|
|
* @brief CAN driver modules
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_CAN_MODULE_ENABLED
|
|
|
|
#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
|
|
defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
|
|
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/** @defgroup CAN_Private_Constants CAN Private Constants
|
|
* @{
|
|
*/
|
|
#define CAN_TIMEOUT_VALUE 10U
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @defgroup CAN_Private_Functions CAN Private Functions
|
|
* @{
|
|
*/
|
|
static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
|
|
static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup CAN_Exported_Functions CAN Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Initialize and configure the CAN.
|
|
(+) De-initialize the CAN.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the CAN peripheral according to the specified
|
|
* parameters in the CAN_InitStruct.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
|
|
{
|
|
uint32_t status = CAN_INITSTATUS_FAILED; /* Default init status */
|
|
uint32_t tickstart = 0U;
|
|
uint32_t tmp_mcr = 0U;
|
|
|
|
/* Check CAN handle */
|
|
if(hcan == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
|
|
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
|
|
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
|
|
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
|
|
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
|
|
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
|
|
assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
|
|
assert_param(IS_CAN_MODE(hcan->Init.Mode));
|
|
assert_param(IS_CAN_SJW(hcan->Init.SJW));
|
|
assert_param(IS_CAN_BS1(hcan->Init.BS1));
|
|
assert_param(IS_CAN_BS2(hcan->Init.BS2));
|
|
assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
|
|
|
|
if(hcan->State == HAL_CAN_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hcan->Lock = HAL_UNLOCKED;
|
|
/* Init the low level hardware */
|
|
HAL_CAN_MspInit(hcan);
|
|
}
|
|
|
|
/* Initialize the CAN state*/
|
|
hcan->State = HAL_CAN_STATE_BUSY;
|
|
|
|
/* Exit from sleep mode */
|
|
CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_SLEEP);
|
|
|
|
/* Request initialisation */
|
|
SET_BIT(hcan->Instance->MCR, CAN_MCR_INRQ);
|
|
|
|
/* Get timeout */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait the acknowledge */
|
|
while(HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_INAK))
|
|
{
|
|
if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE)
|
|
{
|
|
hcan->State= HAL_CAN_STATE_TIMEOUT;
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Check acknowledge */
|
|
if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
|
|
{
|
|
/* Set the time triggered communication mode */
|
|
if (hcan->Init.TTCM == ENABLE)
|
|
{
|
|
SET_BIT(tmp_mcr, CAN_MCR_TTCM);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(tmp_mcr, CAN_MCR_TTCM);
|
|
}
|
|
|
|
/* Set the automatic bus-off management */
|
|
if (hcan->Init.ABOM == ENABLE)
|
|
{
|
|
SET_BIT(tmp_mcr, CAN_MCR_ABOM);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(tmp_mcr, CAN_MCR_ABOM);
|
|
}
|
|
|
|
/* Set the automatic wake-up mode */
|
|
if (hcan->Init.AWUM == ENABLE)
|
|
{
|
|
SET_BIT(tmp_mcr, CAN_MCR_AWUM);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(tmp_mcr, CAN_MCR_AWUM);
|
|
}
|
|
/* Set the no automatic retransmission */
|
|
if (hcan->Init.NART == ENABLE)
|
|
{
|
|
SET_BIT(tmp_mcr, CAN_MCR_NART);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(tmp_mcr, CAN_MCR_NART);
|
|
}
|
|
|
|
/* Set the receive FIFO locked mode */
|
|
if (hcan->Init.RFLM == ENABLE)
|
|
{
|
|
SET_BIT(tmp_mcr, CAN_MCR_RFLM);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(tmp_mcr, CAN_MCR_RFLM);
|
|
}
|
|
/* Set the transmit FIFO priority */
|
|
if (hcan->Init.TXFP == ENABLE)
|
|
{
|
|
SET_BIT(tmp_mcr, CAN_MCR_TXFP);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(tmp_mcr, CAN_MCR_TXFP);
|
|
}
|
|
|
|
/* Update register MCR */
|
|
MODIFY_REG(hcan->Instance->MCR,
|
|
CAN_MCR_TTCM |
|
|
CAN_MCR_ABOM |
|
|
CAN_MCR_AWUM |
|
|
CAN_MCR_NART |
|
|
CAN_MCR_RFLM |
|
|
CAN_MCR_TXFP,
|
|
tmp_mcr);
|
|
|
|
/* Set the bit timing register */
|
|
WRITE_REG(hcan->Instance->BTR, (uint32_t)(hcan->Init.Mode |
|
|
hcan->Init.SJW |
|
|
hcan->Init.BS1 |
|
|
hcan->Init.BS2 |
|
|
(hcan->Init.Prescaler - 1U)));
|
|
|
|
/* Request leave initialisation */
|
|
CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_INRQ);
|
|
|
|
/* Get timeout */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait the acknowledge */
|
|
while(HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_INAK))
|
|
{
|
|
if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE)
|
|
{
|
|
hcan->State= HAL_CAN_STATE_TIMEOUT;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Check acknowledged */
|
|
if(HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_INAK))
|
|
{
|
|
status = CAN_INITSTATUS_SUCCESS;
|
|
}
|
|
}
|
|
|
|
if(status == CAN_INITSTATUS_SUCCESS)
|
|
{
|
|
/* Set CAN error code to none */
|
|
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
|
|
|
|
/* Initialize the CAN state */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Initialize the CAN state */
|
|
hcan->State = HAL_CAN_STATE_ERROR;
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the CAN reception filter according to the specified
|
|
* parameters in the CAN_FilterInitStruct.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @param sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that
|
|
* contains the filter configuration information.
|
|
* @retval None
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
|
|
{
|
|
uint32_t filternbrbitpos = 0U;
|
|
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcan);
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
|
|
assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
|
|
assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
|
|
assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
|
|
assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
|
|
assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
|
|
|
|
filternbrbitpos = (1U) << sFilterConfig->FilterNumber;
|
|
|
|
/* Initialisation mode for the filter */
|
|
/* Select the start slave bank */
|
|
MODIFY_REG(hcan->Instance->FMR ,
|
|
CAN_FMR_CAN2SB ,
|
|
CAN_FMR_FINIT |
|
|
(uint32_t)(sFilterConfig->BankNumber << 8U) );
|
|
|
|
/* Filter Deactivation */
|
|
CLEAR_BIT(hcan->Instance->FA1R, filternbrbitpos);
|
|
|
|
/* Filter Scale */
|
|
if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
|
|
{
|
|
/* 16-bit scale for the filter */
|
|
CLEAR_BIT(hcan->Instance->FS1R, filternbrbitpos);
|
|
|
|
/* First 16-bit identifier and First 16-bit mask */
|
|
/* Or First 16-bit identifier and Second 16-bit identifier */
|
|
hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
|
|
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16U) |
|
|
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow);
|
|
|
|
/* Second 16-bit identifier and Second 16-bit mask */
|
|
/* Or Third 16-bit identifier and Fourth 16-bit identifier */
|
|
hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
|
|
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) |
|
|
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh);
|
|
}
|
|
|
|
if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
|
|
{
|
|
/* 32-bit scale for the filter */
|
|
SET_BIT(hcan->Instance->FS1R, filternbrbitpos);
|
|
/* 32-bit identifier or First 32-bit identifier */
|
|
hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
|
|
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh) << 16U) |
|
|
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow);
|
|
/* 32-bit mask or Second 32-bit identifier */
|
|
hcan->Instance->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
|
|
((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) |
|
|
(0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow);
|
|
}
|
|
|
|
/* Filter Mode */
|
|
if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
|
|
{
|
|
/*Id/Mask mode for the filter*/
|
|
CLEAR_BIT(hcan->Instance->FM1R, filternbrbitpos);
|
|
}
|
|
else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
|
|
{
|
|
/*Identifier list mode for the filter*/
|
|
SET_BIT(hcan->Instance->FM1R, filternbrbitpos);
|
|
}
|
|
|
|
/* Filter FIFO assignment */
|
|
if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
|
|
{
|
|
/* FIFO 0 assignation for the filter */
|
|
CLEAR_BIT(hcan->Instance->FFA1R, filternbrbitpos);
|
|
}
|
|
else
|
|
{
|
|
/* FIFO 1 assignation for the filter */
|
|
SET_BIT(hcan->Instance->FFA1R, filternbrbitpos);
|
|
}
|
|
|
|
/* Filter activation */
|
|
if (sFilterConfig->FilterActivation == ENABLE)
|
|
{
|
|
SET_BIT(hcan->Instance->FA1R, filternbrbitpos);
|
|
}
|
|
|
|
/* Leave the initialisation mode for the filter */
|
|
CLEAR_BIT(hcan->Instance->FMR, ((uint32_t)CAN_FMR_FINIT));
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Deinitializes the CANx peripheral registers to their default reset values.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Check CAN handle */
|
|
if(hcan == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
|
|
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_BUSY;
|
|
|
|
/* DeInit the low level hardware */
|
|
HAL_CAN_MspDeInit(hcan);
|
|
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_RESET;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the CAN MSP.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcan);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_CAN_MspInit can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the CAN MSP.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcan);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_CAN_MspDeInit can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CAN_Exported_Functions_Group2 Input and Output operation functions
|
|
* @brief I/O operation functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### IO operation functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Transmit a CAN frame message.
|
|
(+) Receive a CAN frame message.
|
|
(+) Enter CAN peripheral in sleep mode.
|
|
(+) Wake up the CAN peripheral from sleep mode.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initiates and transmits a CAN frame message.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @param Timeout: Specify Timeout value
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
|
|
{
|
|
uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
|
|
assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
|
|
assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
|
|
|
|
if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \
|
|
((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \
|
|
((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2))
|
|
{
|
|
/* Process locked */
|
|
__HAL_LOCK(hcan);
|
|
|
|
/* Change CAN state */
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_READY */
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX;
|
|
break;
|
|
}
|
|
|
|
/* Select one empty transmit mailbox */
|
|
if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME0))
|
|
{
|
|
transmitmailbox = CAN_TXMAILBOX_0;
|
|
}
|
|
else if (HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME1))
|
|
{
|
|
transmitmailbox = CAN_TXMAILBOX_1;
|
|
}
|
|
else
|
|
{
|
|
transmitmailbox = CAN_TXMAILBOX_2;
|
|
}
|
|
|
|
/* Set up the Id */
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
|
|
if (hcan->pTxMsg->IDE == CAN_ID_STD)
|
|
{
|
|
assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << CAN_TI0R_STID_Pos) |
|
|
hcan->pTxMsg->RTR);
|
|
}
|
|
else
|
|
{
|
|
assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << CAN_TI0R_EXID_Pos) |
|
|
hcan->pTxMsg->IDE |
|
|
hcan->pTxMsg->RTR);
|
|
}
|
|
|
|
/* Set up the DLC */
|
|
hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= 0xFFFFFFF0U;
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
|
|
|
|
/* Set up the data field */
|
|
WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDLR, ((uint32_t)hcan->pTxMsg->Data[3] << CAN_TDL0R_DATA3_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[2] << CAN_TDL0R_DATA2_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[1] << CAN_TDL0R_DATA1_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[0] << CAN_TDL0R_DATA0_Pos));
|
|
WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDHR, ((uint32_t)hcan->pTxMsg->Data[7] << CAN_TDL0R_DATA3_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[6] << CAN_TDL0R_DATA2_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[5] << CAN_TDL0R_DATA1_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[4] << CAN_TDL0R_DATA0_Pos));
|
|
/* Request transmission */
|
|
SET_BIT(hcan->Instance->sTxMailBox[transmitmailbox].TIR, CAN_TI0R_TXRQ);
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Check End of transmission flag */
|
|
while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
|
|
{
|
|
/* Check for the Timeout */
|
|
if(Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
|
|
{
|
|
hcan->State = HAL_CAN_STATE_TIMEOUT;
|
|
|
|
/* Cancel transmission */
|
|
__HAL_CAN_CANCEL_TRANSMIT(hcan, transmitmailbox);
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
/* Change CAN state */
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_BUSY_TX */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
break;
|
|
}
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_ERROR;
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Initiates and transmits a CAN frame message.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
|
|
{
|
|
uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
|
|
assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
|
|
assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
|
|
|
|
if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \
|
|
((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \
|
|
((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2))
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hcan);
|
|
|
|
/* Select one empty transmit mailbox */
|
|
if(HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME0))
|
|
{
|
|
transmitmailbox = CAN_TXMAILBOX_0;
|
|
}
|
|
else if(HAL_IS_BIT_SET(hcan->Instance->TSR, CAN_TSR_TME1))
|
|
{
|
|
transmitmailbox = CAN_TXMAILBOX_1;
|
|
}
|
|
else
|
|
{
|
|
transmitmailbox = CAN_TXMAILBOX_2;
|
|
}
|
|
|
|
/* Set up the Id */
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
|
|
if(hcan->pTxMsg->IDE == CAN_ID_STD)
|
|
{
|
|
assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << CAN_TI0R_STID_Pos) | \
|
|
hcan->pTxMsg->RTR);
|
|
}
|
|
else
|
|
{
|
|
assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << CAN_TI0R_EXID_Pos) | \
|
|
hcan->pTxMsg->IDE |
|
|
hcan->pTxMsg->RTR);
|
|
}
|
|
|
|
/* Set up the DLC */
|
|
hcan->pTxMsg->DLC &= (uint8_t)0x0000000FU;
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= 0xFFFFFFF0U;
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
|
|
|
|
/* Set up the data field */
|
|
WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDLR, ((uint32_t)hcan->pTxMsg->Data[3U] << CAN_TDL0R_DATA3_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[2U] << CAN_TDL0R_DATA2_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[1U] << CAN_TDL0R_DATA1_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[0U] << CAN_TDL0R_DATA0_Pos));
|
|
WRITE_REG(hcan->Instance->sTxMailBox[transmitmailbox].TDHR, ((uint32_t)hcan->pTxMsg->Data[7U] << CAN_TDL0R_DATA3_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[6U] << CAN_TDL0R_DATA2_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[5U] << CAN_TDL0R_DATA1_Pos) |
|
|
((uint32_t)hcan->pTxMsg->Data[4U] << CAN_TDL0R_DATA0_Pos));
|
|
|
|
/* Change CAN state */
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_READY */
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX;
|
|
break;
|
|
}
|
|
|
|
/* Set CAN error code to none */
|
|
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Request transmission */
|
|
hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
|
|
|
|
/* Enable interrupts: */
|
|
/* - Enable Error warning Interrupt */
|
|
/* - Enable Error passive Interrupt */
|
|
/* - Enable Bus-off Interrupt */
|
|
/* - Enable Last error code Interrupt */
|
|
/* - Enable Error Interrupt */
|
|
/* - Enable Transmit mailbox empty Interrupt */
|
|
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
|
|
CAN_IT_EPV |
|
|
CAN_IT_BOF |
|
|
CAN_IT_LEC |
|
|
CAN_IT_ERR |
|
|
CAN_IT_TME );
|
|
}
|
|
else
|
|
{
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_ERROR;
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Receives a correct CAN frame.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @param FIFONumber: FIFO Number value
|
|
* @param Timeout: Specify Timeout value
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart = 0U;
|
|
CanRxMsgTypeDef* pRxMsg = NULL;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_FIFO(FIFONumber));
|
|
|
|
/* Check if CAN state is not busy for RX FIFO0 */
|
|
if ((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Check if CAN state is not busy for RX FIFO1 */
|
|
if ((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hcan);
|
|
|
|
/* Change CAN state */
|
|
if (FIFONumber == CAN_FIFO0)
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_READY */
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0;
|
|
break;
|
|
}
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_READY */
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX1;
|
|
break;
|
|
}
|
|
}
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Check pending message */
|
|
while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0U)
|
|
{
|
|
/* Check for the Timeout */
|
|
if(Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
|
|
{
|
|
hcan->State = HAL_CAN_STATE_TIMEOUT;
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set RxMsg pointer */
|
|
if(FIFONumber == CAN_FIFO0)
|
|
{
|
|
pRxMsg = hcan->pRxMsg;
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
pRxMsg = hcan->pRx1Msg;
|
|
}
|
|
|
|
/* Get the Id */
|
|
pRxMsg->IDE = (uint8_t)CAN_ID_EXT & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
|
|
if (pRxMsg->IDE == CAN_ID_STD)
|
|
{
|
|
pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
|
|
}
|
|
else
|
|
{
|
|
pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
|
|
}
|
|
|
|
pRxMsg->RTR = (uint8_t)CAN_RTR_REMOTE & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
|
|
/* Get the DLC */
|
|
pRxMsg->DLC = (uint8_t)0x0FU & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
|
|
/* Get the FMI */
|
|
pRxMsg->FMI = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
|
|
/* Get the FIFONumber */
|
|
pRxMsg->FIFONumber = FIFONumber;
|
|
/* Get the data field */
|
|
pRxMsg->Data[0] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
|
|
pRxMsg->Data[1] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
|
|
pRxMsg->Data[2] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
|
|
pRxMsg->Data[3] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
|
|
pRxMsg->Data[4] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
|
|
pRxMsg->Data[5] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
|
|
pRxMsg->Data[6] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
|
|
pRxMsg->Data[7] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
|
|
|
|
/* Release the FIFO */
|
|
if(FIFONumber == CAN_FIFO0)
|
|
{
|
|
/* Release FIFO0 */
|
|
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
/* Release FIFO1 */
|
|
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
|
|
}
|
|
|
|
/* Change CAN state */
|
|
if (FIFONumber == CAN_FIFO0)
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_BUSY_RX0 */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
break;
|
|
}
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
|
|
break;
|
|
default: /* HAL_CAN_STATE_BUSY_RX1 */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Receives a correct CAN frame.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @param FIFONumber: Specify the FIFO number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_CAN_FIFO(FIFONumber));
|
|
|
|
/* Check if CAN state is not busy for RX FIFO0 */
|
|
if((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Check if CAN state is not busy for RX FIFO1 */
|
|
if((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \
|
|
(hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1)))
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hcan);
|
|
|
|
/* Change CAN state */
|
|
if(FIFONumber == CAN_FIFO0)
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_READY */
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0;
|
|
break;
|
|
}
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_READY */
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX1;
|
|
break;
|
|
}
|
|
}
|
|
/* Set CAN error code to none */
|
|
hcan->ErrorCode = HAL_CAN_ERROR_NONE;
|
|
|
|
|
|
/* Enable interrupts: */
|
|
/* - Enable Error warning Interrupt */
|
|
/* - Enable Error passive Interrupt */
|
|
/* - Enable Bus-off Interrupt */
|
|
/* - Enable Last error code Interrupt */
|
|
/* - Enable Error Interrupt */
|
|
/* - Enable Transmit mailbox empty Interrupt */
|
|
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG |
|
|
CAN_IT_EPV |
|
|
CAN_IT_BOF |
|
|
CAN_IT_LEC |
|
|
CAN_IT_ERR |
|
|
CAN_IT_TME );
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
if(FIFONumber == CAN_FIFO0)
|
|
{
|
|
/* Enable FIFO 0 overrun and message pending Interrupt */
|
|
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0);
|
|
}
|
|
else
|
|
{
|
|
/* Enable FIFO 1 overrun and message pending Interrupt */
|
|
__HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1);
|
|
}
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Enters the Sleep (low power) mode.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL status.
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
|
|
{
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hcan);
|
|
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_BUSY;
|
|
|
|
/* Request Sleep mode */
|
|
MODIFY_REG(hcan->Instance->MCR,
|
|
CAN_MCR_INRQ ,
|
|
CAN_MCR_SLEEP );
|
|
|
|
/* Sleep mode status */
|
|
if (HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_SLAK) ||
|
|
HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_INAK) )
|
|
{
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait the acknowledge */
|
|
while (HAL_IS_BIT_CLR(hcan->Instance->MSR, CAN_MSR_SLAK) ||
|
|
HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_INAK))
|
|
{
|
|
if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE)
|
|
{
|
|
hcan->State = HAL_CAN_STATE_TIMEOUT;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
|
|
* is in the normal mode.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL status.
|
|
*/
|
|
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
|
|
{
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hcan);
|
|
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_BUSY;
|
|
|
|
/* Wake up request */
|
|
CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_SLEEP);
|
|
|
|
/* Get timeout */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Sleep mode status */
|
|
while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
|
|
{
|
|
if((HAL_GetTick()-tickstart) > CAN_TIMEOUT_VALUE)
|
|
{
|
|
hcan->State= HAL_CAN_STATE_TIMEOUT;
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
if(HAL_IS_BIT_SET(hcan->Instance->MSR, CAN_MSR_SLAK))
|
|
{
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Change CAN state */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Handles CAN interrupt request
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval None
|
|
*/
|
|
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
|
|
{
|
|
uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U;
|
|
uint32_t errorcode = HAL_CAN_ERROR_NONE;
|
|
|
|
/* Check Overrun flag for FIFO0 */
|
|
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV0);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV0);
|
|
if((tmp1 != 0U) && tmp2)
|
|
{
|
|
/* Set CAN error code to FOV0 error */
|
|
errorcode |= HAL_CAN_ERROR_FOV0;
|
|
|
|
/* Clear FIFO0 Overrun Flag */
|
|
__HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV0);
|
|
}
|
|
|
|
/* Check Overrun flag for FIFO1 */
|
|
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV1);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV1);
|
|
if((tmp1 != 0U) && tmp2)
|
|
{
|
|
/* Set CAN error code to FOV1 error */
|
|
errorcode |= HAL_CAN_ERROR_FOV1;
|
|
|
|
/* Clear FIFO1 Overrun Flag */
|
|
__HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV1);
|
|
}
|
|
|
|
/* Check End of transmission flag */
|
|
if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
|
|
{
|
|
/* Check Transmit request completion status */
|
|
tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0);
|
|
tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1);
|
|
tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
|
|
if(tmp1 || tmp2 || tmp3)
|
|
{
|
|
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK0);
|
|
tmp2 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK1);
|
|
tmp3 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK2);
|
|
/* Check Transmit success */
|
|
if((tmp1) || (tmp2) || (tmp3))
|
|
{
|
|
/* Call transmit function */
|
|
CAN_Transmit_IT(hcan);
|
|
}
|
|
else /* Transmit failure */
|
|
{
|
|
/* Set CAN error code to TXFAIL error */
|
|
errorcode |= HAL_CAN_ERROR_TXFAIL;
|
|
}
|
|
|
|
/* Clear transmission status flags (RQCPx and TXOKx) */
|
|
SET_BIT(hcan->Instance->TSR, CAN_TSR_RQCP0 | CAN_TSR_RQCP1 | CAN_TSR_RQCP2 | \
|
|
CAN_FLAG_TXOK0 | CAN_FLAG_TXOK1 | CAN_FLAG_TXOK2);
|
|
}
|
|
}
|
|
|
|
tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
|
|
/* Check End of reception flag for FIFO0 */
|
|
if((tmp1 != 0U) && tmp2)
|
|
{
|
|
/* Call receive function */
|
|
CAN_Receive_IT(hcan, CAN_FIFO0);
|
|
}
|
|
|
|
tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
|
|
/* Check End of reception flag for FIFO1 */
|
|
if((tmp1 != 0U) && tmp2)
|
|
{
|
|
/* Call receive function */
|
|
CAN_Receive_IT(hcan, CAN_FIFO1);
|
|
}
|
|
|
|
/* Set error code in handle */
|
|
hcan->ErrorCode |= errorcode;
|
|
|
|
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
|
|
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
|
|
/* Check Error Warning Flag */
|
|
if(tmp1 && tmp2 && tmp3)
|
|
{
|
|
/* Set CAN error code to EWG error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
|
|
/* No need for clear of Error Warning Flag as read-only */
|
|
}
|
|
|
|
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV);
|
|
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
|
|
/* Check Error Passive Flag */
|
|
if(tmp1 && tmp2 && tmp3)
|
|
{
|
|
/* Set CAN error code to EPV error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
|
|
/* No need for clear of Error Passive Flag as read-only */
|
|
}
|
|
|
|
tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF);
|
|
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
|
|
/* Check Bus-Off Flag */
|
|
if(tmp1 && tmp2 && tmp3)
|
|
{
|
|
/* Set CAN error code to BOF error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
|
|
/* No need for clear of Bus-Off Flag as read-only */
|
|
}
|
|
|
|
tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC);
|
|
tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC);
|
|
tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
|
|
/* Check Last error code Flag */
|
|
if((!tmp1) && tmp2 && tmp3)
|
|
{
|
|
tmp1 = (hcan->Instance->ESR & CAN_ESR_LEC);
|
|
switch(tmp1)
|
|
{
|
|
case(CAN_ESR_LEC_0):
|
|
/* Set CAN error code to STF error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_STF;
|
|
break;
|
|
case(CAN_ESR_LEC_1):
|
|
/* Set CAN error code to FOR error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
|
|
break;
|
|
case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
|
|
/* Set CAN error code to ACK error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
|
|
break;
|
|
case(CAN_ESR_LEC_2):
|
|
/* Set CAN error code to BR error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_BR;
|
|
break;
|
|
case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
|
|
/* Set CAN error code to BD error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_BD;
|
|
break;
|
|
case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
|
|
/* Set CAN error code to CRC error */
|
|
hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Clear Last error code Flag */
|
|
CLEAR_BIT(hcan->Instance->ESR, CAN_ESR_LEC);
|
|
}
|
|
|
|
/* Call the Error call Back in case of Errors */
|
|
if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
|
|
{
|
|
/* Clear ERRI Flag */
|
|
hcan->Instance->MSR = CAN_MSR_ERRI;
|
|
/* Set the CAN state ready to be able to start again the process */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
|
|
/* Disable interrupts: */
|
|
/* - Disable Error warning Interrupt */
|
|
/* - Disable Error passive Interrupt */
|
|
/* - Disable Bus-off Interrupt */
|
|
/* - Disable Last error code Interrupt */
|
|
/* - Disable Error Interrupt */
|
|
/* - Disable FIFO 0 message pending Interrupt */
|
|
/* - Disable FIFO 0 Overrun Interrupt */
|
|
/* - Disable FIFO 1 message pending Interrupt */
|
|
/* - Disable FIFO 1 Overrun Interrupt */
|
|
/* - Disable Transmit mailbox empty Interrupt */
|
|
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
|
|
CAN_IT_EPV |
|
|
CAN_IT_BOF |
|
|
CAN_IT_LEC |
|
|
CAN_IT_ERR |
|
|
CAN_IT_FMP0|
|
|
CAN_IT_FOV0|
|
|
CAN_IT_FMP1|
|
|
CAN_IT_FOV1|
|
|
CAN_IT_TME );
|
|
|
|
/* Call Error callback function */
|
|
HAL_CAN_ErrorCallback(hcan);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Transmission complete callback in non blocking mode
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcan);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_CAN_TxCpltCallback can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Transmission complete callback in non blocking mode
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcan);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_CAN_RxCpltCallback can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Error CAN callback.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hcan);
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_CAN_ErrorCallback can be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
|
|
* @brief CAN Peripheral State functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Peripheral State and Error functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides functions allowing to :
|
|
(+) Check the CAN state.
|
|
(+) Check CAN Errors detected during interrupt process
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief return the CAN state
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL state
|
|
*/
|
|
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Return CAN state */
|
|
return hcan->State;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the CAN error code
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval CAN Error Code
|
|
*/
|
|
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
|
|
{
|
|
return hcan->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup CAN_Private_Functions
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Initiates and transmits a CAN frame message.
|
|
* @param hcan: pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
|
|
{
|
|
/* Disable Transmit mailbox empty Interrupt */
|
|
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
|
|
|
|
if(hcan->State == HAL_CAN_STATE_BUSY_TX)
|
|
{
|
|
/* Disable interrupts: */
|
|
/* - Disable Error warning Interrupt */
|
|
/* - Disable Error passive Interrupt */
|
|
/* - Disable Bus-off Interrupt */
|
|
/* - Disable Last error code Interrupt */
|
|
/* - Disable Error Interrupt */
|
|
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
|
|
CAN_IT_EPV |
|
|
CAN_IT_BOF |
|
|
CAN_IT_LEC |
|
|
CAN_IT_ERR);
|
|
}
|
|
|
|
/* Change CAN state */
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_BUSY_TX */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
break;
|
|
}
|
|
|
|
/* Transmission complete callback */
|
|
HAL_CAN_TxCpltCallback(hcan);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Receives a correct CAN frame.
|
|
* @param hcan: Pointer to a CAN_HandleTypeDef structure that contains
|
|
* the configuration information for the specified CAN.
|
|
* @param FIFONumber: Specify the FIFO number
|
|
* @retval HAL status
|
|
* @retval None
|
|
*/
|
|
static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
|
|
{
|
|
uint32_t tmp1 = 0U;
|
|
CanRxMsgTypeDef* pRxMsg = NULL;
|
|
|
|
/* Set RxMsg pointer */
|
|
if(FIFONumber == CAN_FIFO0)
|
|
{
|
|
pRxMsg = hcan->pRxMsg;
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
pRxMsg = hcan->pRx1Msg;
|
|
}
|
|
|
|
/* Get the Id */
|
|
pRxMsg->IDE = (uint8_t)0x04U & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
|
|
if (pRxMsg->IDE == CAN_ID_STD)
|
|
{
|
|
pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U);
|
|
}
|
|
else
|
|
{
|
|
pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U);
|
|
}
|
|
|
|
pRxMsg->RTR = (uint8_t)0x02U & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
|
|
/* Get the DLC */
|
|
pRxMsg->DLC = (uint8_t)0x0FU & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
|
|
/* Get the FIFONumber */
|
|
pRxMsg->FIFONumber = FIFONumber;
|
|
/* Get the FMI */
|
|
pRxMsg->FMI = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U);
|
|
/* Get the data field */
|
|
pRxMsg->Data[0] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
|
|
pRxMsg->Data[1] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U);
|
|
pRxMsg->Data[2] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U);
|
|
pRxMsg->Data[3] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U);
|
|
pRxMsg->Data[4] = (uint8_t)0xFFU & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
|
|
pRxMsg->Data[5] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U);
|
|
pRxMsg->Data[6] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U);
|
|
pRxMsg->Data[7] = (uint8_t)0xFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U);
|
|
/* Release the FIFO */
|
|
/* Release FIFO0 */
|
|
if (FIFONumber == CAN_FIFO0)
|
|
{
|
|
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
|
|
|
|
/* Disable FIFO 0 overrun and message pending Interrupt */
|
|
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0);
|
|
}
|
|
/* Release FIFO1 */
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
__HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
|
|
|
|
/* Disable FIFO 1 overrun and message pending Interrupt */
|
|
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1);
|
|
}
|
|
|
|
tmp1 = hcan->State;
|
|
if((tmp1 == HAL_CAN_STATE_BUSY_RX0) || (tmp1 == HAL_CAN_STATE_BUSY_RX1))
|
|
{
|
|
/* Disable interrupts: */
|
|
/* - Disable Error warning Interrupt */
|
|
/* - Disable Error passive Interrupt */
|
|
/* - Disable Bus-off Interrupt */
|
|
/* - Disable Last error code Interrupt */
|
|
/* - Disable Error Interrupt */
|
|
__HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG |
|
|
CAN_IT_EPV |
|
|
CAN_IT_BOF |
|
|
CAN_IT_LEC |
|
|
CAN_IT_ERR);
|
|
}
|
|
|
|
/* Change CAN state */
|
|
if (FIFONumber == CAN_FIFO0)
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX1;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX1;
|
|
break;
|
|
default: /* HAL_CAN_STATE_BUSY_RX0 */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
break;
|
|
}
|
|
}
|
|
else /* FIFONumber == CAN_FIFO1 */
|
|
{
|
|
switch(hcan->State)
|
|
{
|
|
case(HAL_CAN_STATE_BUSY_TX_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_RX0;
|
|
break;
|
|
case(HAL_CAN_STATE_BUSY_TX_RX0_RX1):
|
|
hcan->State = HAL_CAN_STATE_BUSY_TX_RX0;
|
|
break;
|
|
default: /* HAL_CAN_STATE_BUSY_RX1 */
|
|
hcan->State = HAL_CAN_STATE_READY;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Receive complete callback */
|
|
HAL_CAN_RxCpltCallback(hcan);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */
|
|
|
|
#endif /* HAL_CAN_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|