interfisch
/
hoverboard-firmware-hack-foc-serial-esc
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

disable field weakening

This commit is contained in:
interfisch 2019-12-03 22:53:37 +01:00
parent 61b40e9526
commit 4c16b2ab8e
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Inc/config.h
View File

@ -145,7 +145,7 @@
#define CTRL_TYP_SEL 1 // [-] Control type selection: 0 = Commutation , 1 = Sinusoidal, 2 = FOC Field Oriented Control (default) #define CTRL_TYP_SEL 1 // [-] Control type selection: 0 = Commutation , 1 = Sinusoidal, 2 = FOC Field Oriented Control (default)
#define CTRL_MOD_REQ 1 // [-] Control mode request: 0 = Open mode, 1 = VOLTAGE mode (default), 2 = SPEED mode, 3 = TORQUE mode. Note: SPEED and TORQUE modes are only available for FOC! #define CTRL_MOD_REQ 1 // [-] Control mode request: 0 = Open mode, 1 = VOLTAGE mode (default), 2 = SPEED mode, 3 = TORQUE mode. Note: SPEED and TORQUE modes are only available for FOC!
#define DIAG_ENA 1 // [-] Motor Diagnostics enable flag: 0 = Disabled, 1 = Enabled (default) #define DIAG_ENA 1 // [-] Motor Diagnostics enable flag: 0 = Disabled, 1 = Enabled (default)
#define FIELD_WEAK_ENA 1 // [-] Field Weakening enable flag: 0 = Disabled (default), 1 = Enabled #define FIELD_WEAK_ENA 0 // [-] Field Weakening enable flag: 0 = Disabled (default), 1 = Enabled
#define I_MOT_MAX (15 * A2BIT_CONV) << 4 // [A] Maximum motor current limit (Change only the first number, the rest is needed for fixed-point conversion, fixdt(1,16,4)) #define I_MOT_MAX (15 * A2BIT_CONV) << 4 // [A] Maximum motor current limit (Change only the first number, the rest is needed for fixed-point conversion, fixdt(1,16,4))
#define I_DC_MAX (17 * A2BIT_CONV) // [A] Maximum DC Link current limit (This is the final current protection. Above this value, current chopping is applied. To avoid this make sure that I_DC_MAX = I_MOT_MAX + 2A ) #define I_DC_MAX (17 * A2BIT_CONV) // [A] Maximum DC Link current limit (This is the final current protection. Above this value, current chopping is applied. To avoid this make sure that I_DC_MAX = I_MOT_MAX + 2A )
#define N_MOT_MAX 800 << 4 // [rpm] Maximum motor speed (change only the first number, the rest is needed for fixed-point conversion, fixdt(1,16,4)) #define N_MOT_MAX 800 << 4 // [rpm] Maximum motor speed (change only the first number, the rest is needed for fixed-point conversion, fixdt(1,16,4))