hoverboard-firmware-hack-foc-serial-esc/Src/stm32f1xx_it.c

/**
  ******************************************************************************
  * @file    stm32f1xx_it.c
  * @brief   Interrupt Service Routines.
  ******************************************************************************
  *
  * COPYRIGHT(c) 2017 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
#include "stm32f1xx.h"
#include "stm32f1xx_it.h"
#include "defines.h"
#include "config.h"
#include "util.h"

extern DMA_HandleTypeDef hdma_i2c2_rx;
extern DMA_HandleTypeDef hdma_i2c2_tx;
extern I2C_HandleTypeDef hi2c2;

extern DMA_HandleTypeDef hdma_usart2_rx;
extern DMA_HandleTypeDef hdma_usart2_tx;
extern DMA_HandleTypeDef hdma_usart3_rx;
extern DMA_HandleTypeDef hdma_usart3_tx;

/* USER CODE BEGIN 0 */
extern UART_HandleTypeDef huart2;
extern UART_HandleTypeDef huart3;
/* USER CODE END 0 */

/* External variables --------------------------------------------------------*/


/******************************************************************************/
/*            Cortex-M3 Processor Interruption and Exception Handlers         */
/******************************************************************************/

/**
* @brief This function handles Non maskable interrupt.
*/
void NMI_Handler(void) {
  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */

  /* USER CODE END NonMaskableInt_IRQn 0 */
  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */

  /* USER CODE END NonMaskableInt_IRQn 1 */
}

/**
* @brief This function handles Hard fault interrupt.
*/
void HardFault_Handler(void) {
  /* USER CODE BEGIN HardFault_IRQn 0 */

  /* USER CODE END HardFault_IRQn 0 */
  while(1) {
  }
  /* USER CODE BEGIN HardFault_IRQn 1 */

  /* USER CODE END HardFault_IRQn 1 */
}

/**
* @brief This function handles Memory management fault.
*/
void MemManage_Handler(void) {
  /* USER CODE BEGIN MemoryManagement_IRQn 0 */

  /* USER CODE END MemoryManagement_IRQn 0 */
  while(1) {
  }
  /* USER CODE BEGIN MemoryManagement_IRQn 1 */

  /* USER CODE END MemoryManagement_IRQn 1 */
}

/**
* @brief This function handles Prefetch fault, memory access fault.
*/
void BusFault_Handler(void) {
  /* USER CODE BEGIN BusFault_IRQn 0 */

  /* USER CODE END BusFault_IRQn 0 */
  while(1) {
  }
  /* USER CODE BEGIN BusFault_IRQn 1 */

  /* USER CODE END BusFault_IRQn 1 */
}

/**
* @brief This function handles Undefined instruction or illegal state.
*/
void UsageFault_Handler(void) {
  /* USER CODE BEGIN UsageFault_IRQn 0 */

  /* USER CODE END UsageFault_IRQn 0 */
  while(1) {
  }
  /* USER CODE BEGIN UsageFault_IRQn 1 */

  /* USER CODE END UsageFault_IRQn 1 */
}

/**
* @brief This function handles System service call via SWI instruction.
*/
void SVC_Handler(void) {
  /* USER CODE BEGIN SVCall_IRQn 0 */

  /* USER CODE END SVCall_IRQn 0 */
  /* USER CODE BEGIN SVCall_IRQn 1 */

  /* USER CODE END SVCall_IRQn 1 */
}

/**
* @brief This function handles Debug monitor.
*/
void DebugMon_Handler(void) {
  /* USER CODE BEGIN DebugMonitor_IRQn 0 */

  /* USER CODE END DebugMonitor_IRQn 0 */
  /* USER CODE BEGIN DebugMonitor_IRQn 1 */

  /* USER CODE END DebugMonitor_IRQn 1 */
}

/**
* @brief This function handles Pendable request for system service.
*/
void PendSV_Handler(void) {
  /* USER CODE BEGIN PendSV_IRQn 0 */

  /* USER CODE END PendSV_IRQn 0 */
  /* USER CODE BEGIN PendSV_IRQn 1 */

  /* USER CODE END PendSV_IRQn 1 */
}

/**
* @brief This function handles System tick timer.
*/
#if defined(CONTROL_PPM_LEFT) || defined(CONTROL_PPM_RIGHT)
void PPM_SysTick_Callback(void);
#endif

#if defined(CONTROL_PWM_LEFT) || defined(CONTROL_PWM_RIGHT)
void PWM_SysTick_Callback(void);
#endif

void SysTick_Handler(void) {
  /* USER CODE BEGIN SysTick_IRQn 0 */

  /* USER CODE END SysTick_IRQn 0 */
  HAL_IncTick();
  HAL_SYSTICK_IRQHandler();
  /* USER CODE BEGIN SysTick_IRQn 1 */
#if defined(CONTROL_PPM_LEFT) || defined(CONTROL_PPM_RIGHT)
  PPM_SysTick_Callback();
#endif

#if defined(CONTROL_PWM_LEFT) || defined(CONTROL_PWM_RIGHT)
  PWM_SysTick_Callback();
#endif
  /* USER CODE END SysTick_IRQn 1 */
}

#ifdef CONTROL_NUNCHUK
extern I2C_HandleTypeDef hi2c2;
void I2C1_EV_IRQHandler(void)
{
  HAL_I2C_EV_IRQHandler(&hi2c2);
}

void I2C1_ER_IRQHandler(void)
{
  HAL_I2C_ER_IRQHandler(&hi2c2);
}

/**
* @brief This function handles DMA1 channel4 global interrupt.
*/
void DMA1_Channel4_IRQHandler(void)
{
  /* USER CODE BEGIN DMA1_Channel4_IRQn 0 */

  /* USER CODE END DMA1_Channel4_IRQn 0 */
  HAL_DMA_IRQHandler(&hdma_i2c2_tx);
  /* USER CODE BEGIN DMA1_Channel4_IRQn 1 */

  /* USER CODE END DMA1_Channel4_IRQn 1 */
}

/**
* @brief This function handles DMA1 channel5 global interrupt.
*/
void DMA1_Channel5_IRQHandler(void)
{
  /* USER CODE BEGIN DMA1_Channel5_IRQn 0 */

  /* USER CODE END DMA1_Channel5_IRQn 0 */
  HAL_DMA_IRQHandler(&hdma_i2c2_rx);
  /* USER CODE BEGIN DMA1_Channel5_IRQn 1 */

  /* USER CODE END DMA1_Channel5_IRQn 1 */
}
#endif

#ifdef CONTROL_PPM_LEFT
void EXTI3_IRQHandler(void)
{
  __HAL_GPIO_EXTI_CLEAR_IT(PPM_PIN);
  PPM_ISR_Callback();    
}
#endif
#ifdef CONTROL_PPM_RIGHT
void EXTI15_10_IRQHandler(void)
{
  if(__HAL_GPIO_EXTI_GET_IT(PPM_PIN) != RESET) {
    __HAL_GPIO_EXTI_CLEAR_IT(PPM_PIN);
    PPM_ISR_Callback();
  }
}
#endif

#ifdef CONTROL_PWM_LEFT
void EXTI2_IRQHandler(void)
{    
  __HAL_GPIO_EXTI_CLEAR_IT(PWM_PIN_CH1);
  PWM_ISR_CH1_Callback();
}

void EXTI3_IRQHandler(void)
{
  __HAL_GPIO_EXTI_CLEAR_IT(PWM_PIN_CH2);
  PWM_ISR_CH2_Callback();    
}
#endif
#ifdef CONTROL_PWM_RIGHT
void EXTI15_10_IRQHandler(void)
{
  if(__HAL_GPIO_EXTI_GET_IT(PWM_PIN_CH1) != RESET) {
    __HAL_GPIO_EXTI_CLEAR_IT(PWM_PIN_CH1);
    PWM_ISR_CH1_Callback();
  }
  if(__HAL_GPIO_EXTI_GET_IT(PWM_PIN_CH2) != RESET) {
    __HAL_GPIO_EXTI_CLEAR_IT(PWM_PIN_CH2);
    PWM_ISR_CH2_Callback();
  }
}
#endif

#if defined(DEBUG_SERIAL_USART2) || defined(CONTROL_SERIAL_USART2) || defined(FEEDBACK_SERIAL_USART2) || defined(SIDEBOARD_SERIAL_USART2)
void DMA1_Channel6_IRQHandler(void)
{
  /* USER CODE BEGIN DMA1_Channel4_IRQn 0 */

  /* USER CODE END DMA1_Channel4_IRQn 0 */
  HAL_DMA_IRQHandler(&hdma_usart2_rx);
  /* USER CODE BEGIN DMA1_Channel4_IRQn 1 */

  /* USER CODE END DMA1_Channel4_IRQn 1 */
}

/**
* @brief This function handles DMA1 channel5 global interrupt.
*/
void DMA1_Channel7_IRQHandler(void)
{
  /* USER CODE BEGIN DMA1_Channel5_IRQn 0 */

  /* USER CODE END DMA1_Channel5_IRQn 0 */
  HAL_DMA_IRQHandler(&hdma_usart2_tx);
  /* USER CODE BEGIN DMA1_Channel5_IRQn 1 */

  /* USER CODE END DMA1_Channel5_IRQn 1 */
}
#endif

#if defined(DEBUG_SERIAL_USART3) || defined(CONTROL_SERIAL_USART3) || defined(FEEDBACK_SERIAL_USART3) || defined(SIDEBOARD_SERIAL_USART3)
/**
  * @brief This function handles DMA1 channel2 global interrupt.
  */
void DMA1_Channel2_IRQHandler(void)
{
  /* USER CODE BEGIN DMA1_Channel2_IRQn 0 */

  /* USER CODE END DMA1_Channel2_IRQn 0 */
  HAL_DMA_IRQHandler(&hdma_usart3_tx);
  /* USER CODE BEGIN DMA1_Channel2_IRQn 1 */

  /* USER CODE END DMA1_Channel2_IRQn 1 */
}

/**
  * @brief This function handles DMA1 channel3 global interrupt.
  */
void DMA1_Channel3_IRQHandler(void)
{
  /* USER CODE BEGIN DMA1_Channel3_IRQn 0 */

  /* USER CODE END DMA1_Channel3_IRQn 0 */
  HAL_DMA_IRQHandler(&hdma_usart3_rx);
  /* USER CODE BEGIN DMA1_Channel3_IRQn 1 */

  /* USER CODE END DMA1_Channel3_IRQn 1 */
}
#endif

#if defined(DEBUG_SERIAL_USART2) || defined(CONTROL_SERIAL_USART2) || defined(FEEDBACK_SERIAL_USART2) || defined(SIDEBOARD_SERIAL_USART2)
/**
  * @brief This function handles USART2 global interrupt.
  */
void USART2_IRQHandler(void)
{
  /* USER CODE BEGIN USART2_IRQn 0 */

  /* USER CODE END USART2_IRQn 0 */
  HAL_UART_IRQHandler(&huart2);
  /* USER CODE BEGIN USART2_IRQn 1 */
  if(RESET != __HAL_UART_GET_IT_SOURCE(&huart2, UART_IT_IDLE)) {  // Check for IDLE line interrupt
      __HAL_UART_CLEAR_IDLEFLAG(&huart2);                         // Clear IDLE line flag (otherwise it will continue to enter interrupt)
      usart2_rx_check();                                          // Check for data to process
  }
  /* USER CODE END USART2_IRQn 1 */
}
#endif

#if defined(DEBUG_SERIAL_USART3) || defined(CONTROL_SERIAL_USART3) || defined(FEEDBACK_SERIAL_USART3) || defined(SIDEBOARD_SERIAL_USART3)
/**
  * @brief This function handles USART3 global interrupt.
  */
void USART3_IRQHandler(void)
{
  /* USER CODE BEGIN USART2_IRQn 0 */

  /* USER CODE END USART2_IRQn 0 */
  HAL_UART_IRQHandler(&huart3);
  /* USER CODE BEGIN USART2_IRQn 1 */
  if(RESET != __HAL_UART_GET_IT_SOURCE(&huart3, UART_IT_IDLE)) {  // Check for IDLE line interrupt  
      __HAL_UART_CLEAR_IDLEFLAG(&huart3);                         // Clear IDLE line flag (otherwise it will continue to enter interrupt)
      usart3_rx_check();                                          // Check for data to process
  }
  /* USER CODE END USART2_IRQn 1 */
}
#endif

/******************************************************************************/
/* STM32F1xx Peripheral Interrupt Handlers                                    */
/* Add here the Interrupt Handlers for the used peripherals.                  */
/* For the available peripheral interrupt handler names,                      */
/* please refer to the startup file (startup_stm32f1xx.s).                    */
/******************************************************************************/


/* USER CODE BEGIN 1 */

/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/