interfisch
/
hoverboard-firmware-hack-foc-serial-esc
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
hoverboard-firmware-hack-fo.../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_nor.c

1061 lines
33 KiB
C
Raw Normal View History

Initial commit
2019-10-06 13:09:15 +00:00
/**
******************************************************************************
* @file stm32f1xx_hal_nor.c
* @author MCD Application Team
* @version V1.1.1
* @date 12-May-2017
* @brief NOR HAL module driver.
* This file provides a generic firmware to drive NOR memories mounted
* as external device.
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
This driver is a generic layered driver which contains a set of APIs used to
control NOR flash memories. It uses the FSMC layer functions to interface
with NOR devices. This driver is used as follows:
(+) NOR flash memory configuration sequence using the function HAL_NOR_Init()
with control and timing parameters for both normal and extended mode.
(+) Read NOR flash memory manufacturer code and device IDs using the function
HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef
structure declared by the function caller.
(+) Access NOR flash memory by read/write data unit operations using the functions
HAL_NOR_Read(), HAL_NOR_Program().
(+) Perform NOR flash erase block/chip operations using the functions
HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
(+) Read the NOR flash CFI (common flash interface) IDs using the function
HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
structure declared by the function caller.
(+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation
(+) You can monitor the NOR device HAL state by calling the function
HAL_NOR_GetState()
[..]
(@) This driver is a set of generic APIs which handle standard NOR flash operations.
If a NOR flash device contains different operations and/or implementations,
it should be implemented separately.
*** NOR HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in NOR HAL driver.
(+) NOR_WRITE : NOR memory write data to specified address
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
#ifdef HAL_NOR_MODULE_ENABLED
#if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F100xE)
/** @defgroup NOR NOR
* @brief NOR driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup NOR_Private_Constants NOR Private Constants
* @{
*/
/* Constants to define address to set to write a command */
#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555
#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055
#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA
#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555
#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555
#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA
#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555
/* Constants to define data to program a command */
#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0
#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA
#define NOR_CMD_DATA_SECOND (uint16_t)0x0055
#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090
#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0
#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080
#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA
#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055
#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010
#define NOR_CMD_DATA_CFI (uint16_t)0x0098
#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25
#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29
#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30
/* Mask on NOR STATUS REGISTER */
#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020
#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/** @defgroup NOR_Private_Macros NOR Private Macros
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup NOR_Private_Variables NOR Private Variables
* @{
*/
static uint32_t uwNORMemoryDataWidth = NOR_MEMORY_8B;
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup NOR_Exported_Functions NOR Exported Functions
* @{
*/
/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### NOR Initialization and de_initialization functions #####
==============================================================================
[..]
This section provides functions allowing to initialize/de-initialize
the NOR memory
@endverbatim
* @{
*/
/**
* @brief Perform the NOR memory Initialization sequence
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param Timing: pointer to NOR control timing structure
* @param ExtTiming: pointer to NOR extended mode timing structure
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FSMC_NORSRAM_TimingTypeDef *Timing, FSMC_NORSRAM_TimingTypeDef *ExtTiming)
{
/* Check the NOR handle parameter */
if(hnor == NULL)
{
return HAL_ERROR;
}
if(hnor->State == HAL_NOR_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hnor->Lock = HAL_UNLOCKED;
/* Initialize the low level hardware (MSP) */
HAL_NOR_MspInit(hnor);
}
/* Initialize NOR control Interface */
FSMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
/* Initialize NOR timing Interface */
FSMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
/* Initialize NOR extended mode timing Interface */
FSMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
/* Enable the NORSRAM device */
__FSMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
/* Initialize NOR Memory Data Width*/
if (hnor->Init.MemoryDataWidth == FSMC_NORSRAM_MEM_BUS_WIDTH_8)
{
uwNORMemoryDataWidth = NOR_MEMORY_8B;
}
else
{
uwNORMemoryDataWidth = NOR_MEMORY_16B;
}
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
return HAL_OK;
}
/**
* @brief Perform NOR memory De-Initialization sequence
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)
{
/* De-Initialize the low level hardware (MSP) */
HAL_NOR_MspDeInit(hnor);
/* Configure the NOR registers with their reset values */
FSMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief NOR MSP Init
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval None
*/
__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hnor);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_NOR_MspInit could be implemented in the user file
*/
}
/**
* @brief NOR MSP DeInit
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval None
*/
__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hnor);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_NOR_MspDeInit could be implemented in the user file
*/
}
/**
* @brief NOR MSP Wait fro Ready/Busy signal
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param Timeout: Maximum timeout value
* @retval None
*/
__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hnor);
UNUSED(Timeout);
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_NOR_MspWait could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions
* @brief Input Output and memory control functions
*
@verbatim
==============================================================================
##### NOR Input and Output functions #####
==============================================================================
[..]
This section provides functions allowing to use and control the NOR memory
@endverbatim
* @{
*/
/**
* @brief Read NOR flash IDs
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param pNOR_ID : pointer to NOR ID structure
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send read ID command */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
/* Read the NOR IDs */
pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR);
pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR);
pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR);
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Returns the NOR memory to Read mode.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Read data from NOR memory
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param pAddress: pointer to Device address
* @param pData : pointer to read data
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send read data command */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
NOR_WRITE((uint32_t)pAddress, NOR_CMD_DATA_READ_RESET);
/* Read the data */
*pData = *(__IO uint32_t *)(uint32_t)pAddress;
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Program data to NOR memory
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param pAddress: Device address
* @param pData : pointer to the data to write
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send program data command */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
/* Write the data */
NOR_WRITE(pAddress, *pData);
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Reads a block of data from the FSMC NOR memory.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param uwAddress: NOR memory internal address to read from.
* @param pData: pointer to the buffer that receives the data read from the
* NOR memory.
* @param uwBufferSize : number of Half word to read.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send read data command */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
NOR_WRITE(uwAddress, NOR_CMD_DATA_READ_RESET);
/* Read buffer */
while( uwBufferSize > 0U)
{
*pData++ = *(__IO uint16_t *)uwAddress;
uwAddress += 2U;
uwBufferSize--;
}
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Writes a half-word buffer to the FSMC NOR memory. This function
* must be used only with S29GL128P NOR memory.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param uwAddress: NOR memory internal address from which the data
* @note Some NOR memory need Address aligned to xx bytes (can be aligned to
* 64 bytes boundary for example).
* @param pData: pointer to source data buffer.
* @param uwBufferSize: number of Half words to write.
* @note The maximum buffer size allowed is NOR memory dependent
* (can be 64 Bytes max for example).
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
{
uint16_t * p_currentaddress = (uint16_t *)NULL;
uint16_t * p_endaddress = (uint16_t *)NULL;
uint32_t lastloadedaddress = 0U, deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Initialize variables */
p_currentaddress = (uint16_t*)((uint32_t)(uwAddress));
p_endaddress = p_currentaddress + (uwBufferSize-1U);
lastloadedaddress = (uint32_t)(uwAddress);
/* Issue unlock command sequence */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
/* Write Buffer Load Command */
NOR_WRITE((uint32_t)(p_currentaddress), NOR_CMD_DATA_BUFFER_AND_PROG);
NOR_WRITE((uint32_t)(p_currentaddress), (uwBufferSize-1U));
/* Load Data into NOR Buffer */
while(p_currentaddress <= p_endaddress)
{
/* Store last loaded address & data value (for polling) */
lastloadedaddress = (uint32_t)p_currentaddress;
NOR_WRITE(p_currentaddress, *pData++);
p_currentaddress++;
}
NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Erase the specified block of the NOR memory
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param BlockAddress : Block to erase address
* @param Address: Device address
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send block erase command sequence */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
/* Check the NOR memory status and update the controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Erase the entire NOR chip.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param Address : Device address
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(Address);
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send NOR chip erase command sequence */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
/* Check the NOR memory status and update the controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Read NOR flash CFI IDs
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param pNOR_CFI : pointer to NOR CFI IDs structure
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
{
uint32_t deviceaddress = 0U;
/* Process Locked */
__HAL_LOCK(hnor);
/* Check the NOR controller state */
if(hnor->State == HAL_NOR_STATE_BUSY)
{
return HAL_BUSY;
}
/* Select the NOR device address */
if (hnor->Init.NSBank == FSMC_NORSRAM_BANK1)
{
deviceaddress = NOR_MEMORY_ADRESS1;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK2)
{
deviceaddress = NOR_MEMORY_ADRESS2;
}
else if (hnor->Init.NSBank == FSMC_NORSRAM_BANK3)
{
deviceaddress = NOR_MEMORY_ADRESS3;
}
else /* FSMC_NORSRAM_BANK4 */
{
deviceaddress = NOR_MEMORY_ADRESS4;
}
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Send read CFI query command */
NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
/* read the NOR CFI information */
pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI1_ADDRESS);
pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI2_ADDRESS);
pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI3_ADDRESS);
pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, CFI4_ADDRESS);
/* Check the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @}
*/
/** @defgroup NOR_Exported_Functions_Group3 Control functions
* @brief management functions
*
@verbatim
==============================================================================
##### NOR Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control dynamically
the NOR interface.
@endverbatim
* @{
*/
/**
* @brief Enables dynamically NOR write operation.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
{
/* Process Locked */
__HAL_LOCK(hnor);
/* Enable write operation */
FSMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank);
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @brief Disables dynamically NOR write operation.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
{
/* Process Locked */
__HAL_LOCK(hnor);
/* Update the SRAM controller state */
hnor->State = HAL_NOR_STATE_BUSY;
/* Disable write operation */
FSMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
/* Update the NOR controller state */
hnor->State = HAL_NOR_STATE_PROTECTED;
/* Process unlocked */
__HAL_UNLOCK(hnor);
return HAL_OK;
}
/**
* @}
*/
/** @defgroup NOR_Exported_Functions_Group4 State functions
* @brief Peripheral State functions
*
@verbatim
==============================================================================
##### NOR State functions #####
==============================================================================
[..]
This subsection permits to get in run-time the status of the NOR controller
and the data flow.
@endverbatim
* @{
*/
/**
* @brief return the NOR controller state
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @retval NOR controller state
*/
HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
{
return hnor->State;
}
/**
* @brief Returns the NOR operation status.
* @param hnor: pointer to a NOR_HandleTypeDef structure that contains
* the configuration information for NOR module.
* @param Address: Device address
* @param Timeout: NOR progamming Timeout
* @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
* or HAL_NOR_STATUS_TIMEOUT
*/
HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
{
HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
uint16_t tmp_sr1 = 0, tmp_sr2 = 0;
uint32_t tickstart = 0U;
/* Poll on NOR memory Ready/Busy signal ------------------------------------*/
HAL_NOR_MspWait(hnor, Timeout);
/* Get tick */
tickstart = HAL_GetTick();
while((status != HAL_NOR_STATUS_SUCCESS) && (status != HAL_NOR_STATUS_TIMEOUT))
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
status = HAL_NOR_STATUS_TIMEOUT;
}
}
/* Read NOR status register (DQ6 and DQ5) */
tmp_sr1 = *(__IO uint16_t *)Address;
tmp_sr2 = *(__IO uint16_t *)Address;
/* If DQ6 did not toggle between the two reads then return NOR_Success */
if((tmp_sr1 & NOR_MASK_STATUS_DQ6) == (tmp_sr2 & NOR_MASK_STATUS_DQ6))
{
return HAL_NOR_STATUS_SUCCESS;
}
if((tmp_sr1 & NOR_MASK_STATUS_DQ5) != NOR_MASK_STATUS_DQ5)
{
status = HAL_NOR_STATUS_ONGOING;
}
tmp_sr1 = *(__IO uint16_t *)Address;
tmp_sr2 = *(__IO uint16_t *)Address;
/* If DQ6 did not toggle between the two reads then return NOR_Success */
if((tmp_sr1 & NOR_MASK_STATUS_DQ6) == (tmp_sr2 & NOR_MASK_STATUS_DQ6))
{
return HAL_NOR_STATUS_SUCCESS;
}
else if((tmp_sr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
{
return HAL_NOR_STATUS_ERROR;
}
}
/* Return the operation status */
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
#endif /* HAL_NOR_MODULE_ENABLED */
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/