bobbycar/controller_teensy/include/display.h

525 lines
14 KiB
C
Raw Normal View History

2023-03-02 21:05:48 +00:00
#ifndef _DISPLAY_H_
#define _DISPLAY_H_
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
2023-05-23 21:57:22 +00:00
#include <Fonts/FreeMonoBold18pt7b.h>
#include <Fonts/FreeSansBold9pt7b.h>
2023-03-02 21:05:48 +00:00
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in pixels
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
2024-07-13 18:58:27 +00:00
uint8_t standingDisplayScreen=0;
2024-09-21 20:10:51 +00:00
#define NUM_STANDINGDISPLAYSCREEN 5
2024-06-26 19:42:16 +00:00
2024-07-14 08:54:49 +00:00
#define DISPLAYSTANDSTILLTIME 5000
2024-06-26 19:42:16 +00:00
2024-09-21 20:10:51 +00:00
#include "rc.h"
2023-05-23 19:46:34 +00:00
bool display_init();
void display_update(ESCSerialComm& escFront, ESCSerialComm& escRear);
void display_drivingDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear);
void display_standingDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear);
void display_standingDisarmedDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear);
2023-03-02 21:05:48 +00:00
void display_debugDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear);
2023-05-23 21:57:22 +00:00
2023-05-23 19:46:34 +00:00
bool display_init(){
2023-03-02 21:05:48 +00:00
if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
Serial.println(F("SSD1306 allocation failed"));
2023-05-23 19:46:34 +00:00
return false;
2023-03-02 21:05:48 +00:00
}
display.clearDisplay();
display.setTextSize(1); // Normal 1:1 pixel scale
display.setTextColor(SSD1306_WHITE); // Draw white text
display.setCursor(0,0); // Start at top-left corner
2023-03-02 21:05:48 +00:00
display.display();
2023-05-23 19:46:34 +00:00
return true;
2023-03-02 21:05:48 +00:00
}
void display_update(ESCSerialComm& escFront, ESCSerialComm& escRear){
2023-03-02 21:05:48 +00:00
display.clearDisplay();
2023-05-23 21:57:22 +00:00
/*
2023-03-02 21:05:48 +00:00
display.setTextSize(1); // Normal 1:1 pixel scale
display.setTextColor(SSD1306_WHITE); // Draw white text
display.setCursor(0,0); // Start at top-left corner
display.print(F("Speed : ")); display.println((escFront.getMeanSpeed()+escRear.getMeanSpeed())/2.0);
2023-05-23 21:57:22 +00:00
display.print(F("Thr: ")); display.print(throttle_pos);
display.print(F(" Brk : ")); display.println(brake_pos);
display.print(F("Current : ")); display.println(filtered_currentAll);
display.print(F("Vbat : ")); display.print(escFront.getFeedback_batVoltage());
display.print(F(" / ")); display.println(escRear.getFeedback_batVoltage());
2023-05-23 21:57:22 +00:00
*/
if ( (error_brake_outofrange || error_throttle_outofrange || error_throttle_difftoohigh || error_ads_max_read_interval || error_sdfile_unavailable) && ((loopmillis/2000)%2==0)) {
//Error Messages
display.setFont();
display.setTextSize(1); // Normal 1:1 pixel scale
display.setTextColor(SSD1306_WHITE); // Draw white text
display.setCursor(0,0); // Start at top-left corner
display.print(F("Error!"));
display.println();
String errorstring="";
if (error_brake_outofrange) {
errorstring+="brake_outofrange\n";
}
if (error_throttle_outofrange) {
errorstring+="throttle_outofrange\n";
}
if (error_throttle_difftoohigh) {
errorstring+="throttle_difftoohigh\n";
}
if (error_ads_max_read_interval) {
errorstring+="ads_max_read_interval\n";
2023-07-10 14:25:19 +00:00
}if (error_sdfile_unavailable) {
errorstring+="error_sdfile_unavailable\n";
}
display.print(errorstring);
}else{
2024-07-13 18:58:27 +00:00
//Normal Display Routines here
if (armed) {
2024-07-14 08:54:49 +00:00
if (loopmillis-last_notidle>DISPLAYSTANDSTILLTIME) {
display_standingDisplay(escFront,escRear);
}else{
2024-07-13 18:58:27 +00:00
display_drivingDisplay(escFront,escRear);
//display_debugDisplay(escFront,escRear);
}
}else{
display_standingDisarmedDisplay(escFront,escRear);
}
2023-07-10 14:25:19 +00:00
}
display.display();
}
void display_drivingDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear) {
2024-07-13 18:58:27 +00:00
//Display stuff here for when bobbycar is moving or was moving recently and is armed
//## Km/h Display
2023-05-23 21:57:22 +00:00
display.setFont(&FreeMonoBold18pt7b);
display.setTextSize(1); // Normal 1:1 pixel scale
display.setTextColor(SSD1306_WHITE); // Draw white text
display.setCursor(0,SCREEN_HEIGHT-(SCREEN_HEIGHT-18)/2 - 3); // Start at top-left corner
2023-05-23 21:57:22 +00:00
2024-07-13 18:58:27 +00:00
//float _speeddisplay=(escFront.getMeanSpeed()+escRear.getMeanSpeed())/2.0*3.6;
float _speeddisplay=minSpeedms*3.6;
2023-05-23 21:57:22 +00:00
//_speeddisplay=(millis()/1000)%21; //debugging
char buf[8];
dtostrf(_speeddisplay,1,1,buf);
String strbuf=buf;
2023-05-23 21:57:22 +00:00
if (strbuf.length()<4) { //pad spaces on the left
strbuf=" "+strbuf;
}
display.print(strbuf);
2023-05-23 21:57:22 +00:00
display.setFont();
display.setCursor(SCREEN_WIDTH-25,SCREEN_HEIGHT-16);
2023-05-23 21:57:22 +00:00
display.print("km/h");
//A
display.setCursor(SCREEN_WIDTH-37,1);
static float averaged_filtered_currentAll;
2023-06-03 10:59:26 +00:00
#define CURRENT_FILTER 0.8
averaged_filtered_currentAll=averaged_filtered_currentAll*CURRENT_FILTER+(1-CURRENT_FILTER)*filtered_currentAll; //filter over time
float averaged_filtered_wattAll=averaged_filtered_currentAll*(escFront.getFeedback_batVoltage()+escRear.getFeedback_batVoltage())/2.0;
//dtostrf(averaged_filtered_currentAll,1,2,buf);
dtostrf(averaged_filtered_wattAll,1,0,buf);
strbuf=buf;
if (strbuf.length()<5) { //pad spaces on the left
strbuf=" "+strbuf;
}
display.print(strbuf);
//display.print("A");
display.print("W");
//## Trip / Current Consumed Display
display.setCursor(1,SCREEN_HEIGHT-7);
2024-07-13 18:58:27 +00:00
//## Current
/*
dtostrf(min_filtered_currentAll,1,1,buf);
display.print("min:");
display.print((String)buf);
display.print("A max:");
2024-07-13 18:58:27 +00:00
dtostrf(max_filtered_currentAll,1,1,buf);
display.print((String)buf);
display.print("A");
*/
//## Watt
dtostrf(min_filtered_wattAll,1,0,buf);
display.print((String)buf);
display.print(" / ");
dtostrf(max_filtered_wattAll,1,0,buf);
display.print((String)buf);
display.print("W ");
display.setCursor(SCREEN_WIDTH-6*6,SCREEN_HEIGHT-7);
dtostrf(max_meanSpeed*3.6,1,0,buf);
display.print((String)buf);
display.print("km/h");
}
2024-07-13 18:58:27 +00:00
void display_debugDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear) {
//Debug
display.setTextSize(2); // Normal 1:1 pixel scale
display.setFont();
display.setTextColor(SSD1306_WHITE); // Draw white text
char buf[8];
display.setCursor(1,0);
dtostrf(filtered_currentAll,1,3,buf);
display.print((String)buf);
display.print(" A > ");
display.println();
//all wheel getCMD
display.setTextSize(1);
display.setCursor(25,SCREEN_HEIGHT-8*2);
display.print(escFront.getCmdL());
display.setCursor(SCREEN_WIDTH-4*7-25,SCREEN_HEIGHT-8*2);
display.print(escFront.getCmdR());
display.setCursor(25,SCREEN_HEIGHT-8*1);
display.print(escRear.getCmdL());
display.setCursor(SCREEN_WIDTH-4*7-25,SCREEN_HEIGHT-8*1);
display.print(escRear.getCmdR());
/*
display.setTextSize(1);
display.setCursor(1,SCREEN_HEIGHT-8*2);
display.print("minCMD=");
display.print(min(min(min(escFront.getCmdL(),escFront.getCmdR()),escRear.getCmdL()),escRear.getCmdR()));
display.print(" thrpos=");
display.print(throttle_pos);
*/
}
2024-07-13 18:58:27 +00:00
void display_standingDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear) {
2024-07-13 18:58:27 +00:00
//Display stuff here when ESCs are powered on and bobbycar is armed but was not moving for a while
double _displaytrip=trip;
//double _displaycurrent=currentConsumed;
double _displaywatthours=watthoursConsumed;
2024-07-13 18:58:27 +00:00
bool _displayOverall= ((millis()/2500)%2==0); //switch based on time
char buf[8];
display.setFont();
display.setCursor(0,0);
2024-07-13 18:58:27 +00:00
if (_displayOverall) { //alternate between this trip and overall trip
_displaytrip=overallTrip;
//_displaycurrent=overallCurrentConsumed;
_displaywatthours=overallWatthoursConsumed;
}
2024-07-13 18:58:27 +00:00
//Row 1
2024-07-16 22:02:48 +00:00
if (!_displayOverall) {
display.print(F("Vbat:")); display.print(escFront.getFeedback_batVoltage());
display.print(F("/")); display.print(escRear.getFeedback_batVoltage());
}else{
display.print(F("Vmin:")); display.print(min_voltage);
}
2024-07-13 18:58:27 +00:00
display.print(" V");
display.println();
2024-07-16 22:02:48 +00:00
2024-07-13 18:58:27 +00:00
//Row 2
//display.print(F("Temp:")); display.print(escFront.getFeedback_boardTemp());
//display.print(F("/")); display.print(escRear.getFeedback_boardTemp());
2024-07-14 08:54:49 +00:00
display.print(F("T:")); display.print(temp_Front,0);
display.print(F("/")); display.print(temp_Rear,0);
2024-07-13 18:58:27 +00:00
display.print(F("/")); display.print(temp_Air,0);
display.print(" C");
display.println();
2024-07-13 18:58:27 +00:00
//Row 3
display.print(F("Trip:"));
dtostrf(_displaytrip,1,0,buf);
display.print((String)buf);
display.print("m ");
//dtostrf(_displaycurrent,1,2,buf);
dtostrf(_displaywatthours,1,2,buf);
display.print((String)buf);
//display.print(" Ah");
display.print("Wh");
display.println();
2024-07-13 18:58:27 +00:00
//Row 4
2024-07-13 18:58:27 +00:00
display.print(F(""));
//dtostrf( _displaytrip/1000/_displaycurrent ,1,2,buf);
dtostrf( _displaywatthours/_displaytrip*100,1,2,buf);
display.print((String)buf);
//display.print(" km/Ah");
display.print(" kWh/100km");
2024-07-13 18:58:27 +00:00
if (_displayOverall){
display.print(" sum");
}
2024-07-13 18:58:27 +00:00
display.println();
2023-03-02 21:05:48 +00:00
}
void display_standingDisarmedDisplay(ESCSerialComm& escFront, ESCSerialComm& escRear) {
2024-07-13 18:58:27 +00:00
//Displayed stuff here when escs are powered off / disconnected or bobbycar is not armed
char buf[8];
display.setFont();
display.setCursor(0,0);
2024-07-13 18:58:27 +00:00
switch(standingDisplayScreen)
{
2024-09-21 20:10:51 +00:00
case 0:
2024-07-13 18:58:27 +00:00
//Quick overview of inputs and status
//Row1
if (getDatalogging()) {
display.print(getLogFilename());
}else{
display.print("LOG DISABLED");
}
display.print(F(" ")); display.print(loopmillis/1000);
display.print(F("s"));
display.println();
//Row2
2024-07-16 22:02:48 +00:00
display.print(F("Throttle "));
dtostrf((throttle_posA+throttle_posB)/2.0,4,0,buf);
2024-07-13 18:58:27 +00:00
display.print((String)buf);
display.print(F(" ("));
if (throttle_posA>throttle_posB) { //use values acutally taken for diff check
display.print(F("+")); //add + for better formatting
}
dtostrf((throttle_posA-throttle_posB),1,0,buf);
2024-07-13 18:58:27 +00:00
display.print((String)buf);
display.print(F(")"));
2024-07-13 18:58:27 +00:00
display.println();
//Row3
display.print("Brake ");
dtostrf(brake_linear,4,0,buf); //use only linearized values (not constrained)
2024-07-13 18:58:27 +00:00
display.print((String)buf);
2024-07-16 22:02:48 +00:00
2024-07-22 08:50:00 +00:00
display.setCursor(8*10,2*8);
2024-07-16 22:02:48 +00:00
dtostrf((escFront.getFeedback_batVoltage()+escRear.getFeedback_batVoltage())/2.0,1,1,buf);
display.print((String)buf);
2024-07-19 20:57:12 +00:00
display.print(F("V"));
2024-07-13 18:58:27 +00:00
display.println();
2024-07-13 17:19:10 +00:00
2024-07-13 18:58:27 +00:00
/*display.print(" c=");
dtostrf(ads_control_raw,1,0,buf);
display.print((String)buf); */
2024-07-13 17:19:10 +00:00
2024-07-13 18:58:27 +00:00
break;
2024-07-13 18:58:27 +00:00
case 1:
//Trip Stats (trip / overall)
2024-07-13 18:58:27 +00:00
//Row 1
display.print(F("Trip ")); display.print(trip,0); display.print(F(" / ")); display.print(overallTrip,0); display.print(F("m"));
display.println();
//Row 2
display.print(F("Curr ")); display.print(currentConsumed*1000,0); display.print(F(" / ")); display.print(overallCurrentConsumed*1000,0); display.print(F("mAh"));
display.println();
//Row 3
display.print(F("Pow ")); display.print(watthoursConsumed,0); display.print(F(" / ")); display.print(overallWatthoursConsumed,0); display.print(F("Wh"));
display.println();
2024-07-13 18:58:27 +00:00
break;
2024-07-13 17:19:10 +00:00
2024-07-13 18:58:27 +00:00
case 2:
//Configuration parameters
//Row 1
display.print(F("cmdred min=")); display.print(minimum_constant_cmd_reduce);
display.print(F(" p=")); display.print(brake_cmdreduce_proportional);
display.println();
//Row 2
display.print(F("brkI="));
dtostrf(startbrakecurrent,1,1,buf);
display.print((String)buf);
display.print("A");
display.print(F(" free="));
dtostrf(freewheel_break_factor,1,1,buf);
display.print((String)buf);
display.println();
//Row 3
display.print(F("thrmax=")); display.print(throttle_max);
display.print(F(" rev="));
dtostrf(reverse_speed,1,2,buf);
display.print((String)buf);
display.println();
break;
2024-09-21 20:10:51 +00:00
case 3:
//Raw inputs and Input Debug
//TODO: show deviation (and max deviation), show resulting throttle and brake pos
//Row1
display.print(F("Throttle "));
dtostrf(ads_throttle_A_raw,1,0,buf);
display.print((String)buf);
display.print(F("/"));
dtostrf(ads_throttle_B_raw,1,0,buf);
display.print((String)buf);
display.println();
//Row2
static int16_t _throttle_maxdiff = 0;
if (control_buttonA || control_buttonB) { //any button press
_throttle_maxdiff=0; //reset maxdiff for this display
}
_throttle_maxdiff=max(_throttle_maxdiff,abs(throttle_posA-throttle_posB));
display.print(F("Thr.maxdiff "));
dtostrf(_throttle_maxdiff,1,0,buf);
display.print((String)buf);
display.println();
//Row3
display.print("Brake ");
dtostrf(ads_brake_raw,1,0,buf);
display.print((String)buf);
display.println();
break;
2024-09-21 20:10:51 +00:00
case 4:
//Row 1
display.print(F("RC "));
dtostrf(ppm[0],4,0,buf);
display.print((String)buf);
display.print(F("/"));
dtostrf(ppm[1],4,0,buf);
display.print((String)buf);
display.println();
//Row 2
display.print(F("T"));
dtostrf(getRCThrottle(),3,0,buf);
display.print((String)buf);
display.print(F(" B"));
dtostrf(getRCBrake(),3,0,buf);
display.print((String)buf);
display.print(F(" S"));
dtostrf(getRCSteer(),3,0,buf);
display.print((String)buf);
display.println();
//Row 3
display.print(F("Mode="));
dtostrf(getRCMode(3),1,0,buf);
display.print((String)buf);
display.print(F(" %="));
dtostrf(getPPMSuccessrate(),1,5,buf);
display.print((String)buf);
display.println();
break;
2024-07-13 18:58:27 +00:00
}
//Put User Inputs in last row
//Row 4
display.setCursor(0,24);
if (button_start_state){
display.print("S");
}else{
display.print(" ");
}
if (control_buttonB){
2024-07-13 18:58:27 +00:00
display.print("B");
}else{
display.print(" ");
}
2024-07-13 18:58:27 +00:00
if (control_buttonA){
display.print("A");
}else{
display.print(" ");
2024-07-12 19:44:40 +00:00
}
2024-07-13 18:58:27 +00:00
if (escFront.getControllerConnected()){
display.print("F");
}else{
display.print(" ");
}
if (escRear.getControllerConnected()){
display.print("R");
}else{
display.print(" ");
}
display.setCursor(SCREEN_WIDTH-6*3,24);
display.print(standingDisplayScreen);
display.print("/"); display.print(NUM_STANDINGDISPLAYSCREEN-1);
}
2023-03-02 21:05:48 +00:00
#endif