323 lines
10 KiB
C
Executable File
323 lines
10 KiB
C
Executable File
/*
|
|
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32F4xx/hal_lld.c
|
|
* @brief STM32F4xx/STM32F2xx HAL subsystem low level driver source.
|
|
*
|
|
* @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
#include "hal.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief CMSIS system core clock variable.
|
|
* @note It is declared in system_stm32f4xx.h.
|
|
*/
|
|
uint32_t SystemCoreClock = STM32_HCLK;
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Initializes the backup domain.
|
|
* @note WARNING! Changing clock source impossible without resetting
|
|
* of the whole BKP domain.
|
|
*/
|
|
static void hal_lld_backup_domain_init(void) {
|
|
|
|
/* Backup domain access enabled and left open.*/
|
|
PWR->CR |= PWR_CR_DBP;
|
|
|
|
/* Reset BKP domain if different clock source selected.*/
|
|
if ((RCC->BDCR & STM32_RTCSEL_MASK) != STM32_RTCSEL) {
|
|
/* Backup domain reset.*/
|
|
RCC->BDCR = RCC_BDCR_BDRST;
|
|
RCC->BDCR = 0;
|
|
}
|
|
|
|
#if STM32_LSE_ENABLED
|
|
#if defined(STM32_LSE_BYPASS)
|
|
/* LSE Bypass.*/
|
|
RCC->BDCR |= RCC_BDCR_LSEON | RCC_BDCR_LSEBYP;
|
|
#else
|
|
/* No LSE Bypass.*/
|
|
RCC->BDCR |= RCC_BDCR_LSEON;
|
|
#endif
|
|
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
|
|
; /* Waits until LSE is stable. */
|
|
#endif
|
|
|
|
#if HAL_USE_RTC
|
|
/* If the backup domain hasn't been initialized yet then proceed with
|
|
initialization.*/
|
|
if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
|
|
/* Selects clock source.*/
|
|
RCC->BDCR |= STM32_RTCSEL;
|
|
|
|
/* RTC clock enabled.*/
|
|
RCC->BDCR |= RCC_BDCR_RTCEN;
|
|
}
|
|
#endif /* HAL_USE_RTC */
|
|
|
|
#if STM32_BKPRAM_ENABLE
|
|
rccEnableBKPSRAM(false);
|
|
|
|
PWR->CSR |= PWR_CSR_BRE;
|
|
while ((PWR->CSR & PWR_CSR_BRR) == 0)
|
|
; /* Waits until the regulator is stable */
|
|
#else
|
|
PWR->CSR &= ~PWR_CSR_BRE;
|
|
#endif /* STM32_BKPRAM_ENABLE */
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level HAL driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void hal_lld_init(void) {
|
|
|
|
/* Reset of all peripherals. AHB3 is not reseted because it could have
|
|
been initialized in the board initialization file (board.c) and AHB2 is not
|
|
present in STM32F410. */
|
|
rccResetAHB1(~0);
|
|
#if !defined(STM32F410xx)
|
|
rccResetAHB2(~0);
|
|
#endif
|
|
rccResetAPB1(~RCC_APB1RSTR_PWRRST);
|
|
rccResetAPB2(~0);
|
|
|
|
/* PWR clock enabled.*/
|
|
rccEnablePWRInterface(FALSE);
|
|
|
|
/* Initializes the backup domain.*/
|
|
hal_lld_backup_domain_init();
|
|
|
|
#if defined(STM32_DMA_REQUIRED)
|
|
dmaInit();
|
|
#endif
|
|
|
|
/* Programmable voltage detector enable.*/
|
|
#if STM32_PVD_ENABLE
|
|
PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
|
|
#endif /* STM32_PVD_ENABLE */
|
|
}
|
|
|
|
/**
|
|
* @brief STM32F2xx clocks and PLL initialization.
|
|
* @note All the involved constants come from the file @p board.h.
|
|
* @note This function should be invoked just after the system reset.
|
|
*
|
|
* @special
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
#if !STM32_NO_INIT
|
|
/* PWR clock enable.*/
|
|
#if defined(HAL_USE_RTC) && defined(RCC_APB1ENR_RTCAPBEN)
|
|
RCC->APB1ENR = RCC_APB1ENR_PWREN | RCC_APB1ENR_RTCAPBEN;
|
|
#else
|
|
RCC->APB1ENR = RCC_APB1ENR_PWREN;
|
|
#endif
|
|
|
|
/* PWR initialization.*/
|
|
#if defined(STM32F4XX) || defined(__DOXYGEN__)
|
|
PWR->CR = STM32_VOS;
|
|
#else
|
|
PWR->CR = 0;
|
|
#endif
|
|
|
|
/* HSI setup, it enforces the reset situation in order to handle possible
|
|
problems with JTAG probes and re-initializations.*/
|
|
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
|
|
while (!(RCC->CR & RCC_CR_HSIRDY))
|
|
; /* Wait until HSI is stable. */
|
|
|
|
/* HSI is selected as new source without touching the other fields in
|
|
CFGR. Clearing the register has to be postponed after HSI is the
|
|
new source.*/
|
|
RCC->CFGR &= ~RCC_CFGR_SW; /* Reset SW */
|
|
RCC->CFGR |= RCC_CFGR_SWS_HSI; /* Select HSI as internal*/
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
|
; /* Wait until HSI is selected. */
|
|
|
|
/* Registers finally cleared to reset values.*/
|
|
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
|
|
RCC->CFGR = 0; /* CFGR reset value. */
|
|
|
|
#if STM32_HSE_ENABLED
|
|
/* HSE activation.*/
|
|
#if defined(STM32_HSE_BYPASS)
|
|
/* HSE Bypass.*/
|
|
RCC->CR |= RCC_CR_HSEON | RCC_CR_HSEBYP;
|
|
#else
|
|
/* No HSE Bypass.*/
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
#endif
|
|
while ((RCC->CR & RCC_CR_HSERDY) == 0)
|
|
; /* Waits until HSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_LSI_ENABLED
|
|
/* LSI activation.*/
|
|
RCC->CSR |= RCC_CSR_LSION;
|
|
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
|
|
; /* Waits until LSI is stable. */
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLL
|
|
/* PLL activation.*/
|
|
RCC->PLLCFGR = STM32_PLLQ | STM32_PLLSRC | STM32_PLLP | STM32_PLLN |
|
|
STM32_PLLM;
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
|
|
/* Synchronization with voltage regulator stabilization.*/
|
|
#if defined(STM32F4XX)
|
|
while ((PWR->CSR & PWR_CSR_VOSRDY) == 0)
|
|
; /* Waits until power regulator is stable. */
|
|
|
|
#if STM32_OVERDRIVE_REQUIRED
|
|
/* Overdrive activation performed after activating the PLL in order to save
|
|
time as recommended in RM in "Entering Over-drive mode" paragraph.*/
|
|
PWR->CR |= PWR_CR_ODEN;
|
|
while (!(PWR->CSR & PWR_CSR_ODRDY))
|
|
;
|
|
PWR->CR |= PWR_CR_ODSWEN;
|
|
while (!(PWR->CSR & PWR_CSR_ODSWRDY))
|
|
;
|
|
#endif /* STM32_OVERDRIVE_REQUIRED */
|
|
#endif /* defined(STM32F4XX) */
|
|
|
|
/* Waiting for PLL lock.*/
|
|
while (!(RCC->CR & RCC_CR_PLLRDY))
|
|
;
|
|
#endif /* STM32_ACTIVATE_PLL */
|
|
|
|
#if STM32_ACTIVATE_PLLI2S
|
|
/* PLLI2S activation.*/
|
|
RCC->PLLI2SCFGR = STM32_PLLI2SR | STM32_PLLI2SN | STM32_PLLI2SP |
|
|
STM32_PLLI2SQ | STM32_PLLI2SM;
|
|
RCC->CR |= RCC_CR_PLLI2SON;
|
|
|
|
/* Waiting for PLL lock.*/
|
|
while (!(RCC->CR & RCC_CR_PLLI2SRDY))
|
|
;
|
|
#endif /* STM32_ACTIVATE_PLLI2S */
|
|
|
|
#if STM32_ACTIVATE_PLLSAI
|
|
/* PLLSAI activation.*/
|
|
RCC->PLLSAICFGR = STM32_PLLSAIR | STM32_PLLSAIN | STM32_PLLSAIP |
|
|
STM32_PLLSAIQ | STM32_PLLSAIM;
|
|
RCC->CR |= RCC_CR_PLLSAION;
|
|
|
|
/* Waiting for PLL lock.*/
|
|
while (!(RCC->CR & RCC_CR_PLLSAIRDY))
|
|
;
|
|
#endif /* STM32_ACTIVATE_PLLSAI */
|
|
|
|
/* Other clock-related settings (dividers, MCO etc).*/
|
|
RCC->CFGR = STM32_MCO2PRE | STM32_MCO2SEL | STM32_MCO1PRE | STM32_MCO1SEL |
|
|
STM32_I2SSRC | STM32_RTCPRE | STM32_PPRE2 | STM32_PPRE1 |
|
|
STM32_HPRE;
|
|
|
|
#if defined(STM32F446xx)
|
|
/* DCKCFGR register initialization, note, must take care of the _OFF
|
|
pseudo settings.*/
|
|
{
|
|
uint32_t dckcfgr = 0;
|
|
#if STM32_SAI2SEL != STM32_SAI2SEL_OFF
|
|
dckcfgr |= STM32_SAI2SEL;
|
|
#endif
|
|
#if STM32_SAI1SEL != STM32_SAI1SEL_OFF
|
|
dckcfgr |= STM32_SAI1SEL;
|
|
#endif
|
|
#if STM32_PLLSAIDIVR != STM32_PLLSAIDIVR_OFF
|
|
dckcfgr |= STM32_PLLSAIDIVR;
|
|
#endif
|
|
RCC->DCKCFGR = dckcfgr | STM32_PLLI2SDIVQ | STM32_PLLSAIDIVQ;
|
|
}
|
|
RCC->DCKCFGR2 = STM32_CK48MSEL;
|
|
#elif defined(STM32F469xx) || defined(STM32F479xx)
|
|
/* DCKCFGR register initialization, note, must take care of the _OFF
|
|
pseudo settings.*/
|
|
{
|
|
uint32_t dckcfgr = 0;
|
|
#if STM32_SAI2SEL != STM32_SAI2SEL_OFF
|
|
dckcfgr |= STM32_SAI2SEL;
|
|
#endif
|
|
#if STM32_SAI1SEL != STM32_SAI1SEL_OFF
|
|
dckcfgr |= STM32_SAI1SEL;
|
|
#endif
|
|
#if STM32_PLLSAIDIVR != STM32_PLLSAIDIVR_OFF
|
|
dckcfgr |= STM32_PLLSAIDIVR;
|
|
#endif
|
|
RCC->DCKCFGR = dckcfgr | STM32_PLLI2SDIVQ | STM32_PLLSAIDIVQ |
|
|
STM32_CK48MSEL;
|
|
}
|
|
#endif
|
|
|
|
/* Flash setup.*/
|
|
#if !defined(STM32_REMOVE_REVISION_A_FIX)
|
|
/* Some old revisions of F4x MCUs randomly crashes with compiler
|
|
optimizations enabled AND flash caches enabled. */
|
|
if ((DBGMCU->IDCODE == 0x20006411) && (SCB->CPUID == 0x410FC241))
|
|
FLASH->ACR = FLASH_ACR_PRFTEN | STM32_FLASHBITS;
|
|
else
|
|
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |
|
|
FLASH_ACR_DCEN | STM32_FLASHBITS;
|
|
#else
|
|
FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN |
|
|
FLASH_ACR_DCEN | STM32_FLASHBITS;
|
|
#endif
|
|
|
|
/* Switching to the configured clock source if it is different from HSI.*/
|
|
#if (STM32_SW != STM32_SW_HSI)
|
|
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
;
|
|
#endif
|
|
#endif /* STM32_NO_INIT */
|
|
|
|
/* SYSCFG clock enabled here because it is a multi-functional unit shared
|
|
among multiple drivers.*/
|
|
rccEnableAPB2(RCC_APB2ENR_SYSCFGEN, TRUE);
|
|
}
|
|
|
|
/** @} */
|