ctdo
/
dfi-led-matrix
16
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
dfi-led-matrix/eigener_ctrl/stm32f407-olimex/chibios/os/hal/ports/STM32/LLD/TIMv1/hal_pwm_lld.c

859 lines
24 KiB
C
Executable File
Raw Blame History

/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file TIMv1/hal_pwm_lld.c
* @brief STM32 PWM subsystem low level driver header.
*
* @addtogroup PWM
* @{
*/
#include "hal.h"
#if HAL_USE_PWM || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/**
* @brief PWMD1 driver identifier.
* @note The driver PWMD1 allocates the complex timer TIM1 when enabled.
*/
#if STM32_PWM_USE_TIM1 || defined(__DOXYGEN__)
PWMDriver PWMD1;
#endif
/**
* @brief PWMD2 driver identifier.
* @note The driver PWMD2 allocates the timer TIM2 when enabled.
*/
#if STM32_PWM_USE_TIM2 || defined(__DOXYGEN__)
PWMDriver PWMD2;
#endif
/**
* @brief PWMD3 driver identifier.
* @note The driver PWMD3 allocates the timer TIM3 when enabled.
*/
#if STM32_PWM_USE_TIM3 || defined(__DOXYGEN__)
PWMDriver PWMD3;
#endif
/**
* @brief PWMD4 driver identifier.
* @note The driver PWMD4 allocates the timer TIM4 when enabled.
*/
#if STM32_PWM_USE_TIM4 || defined(__DOXYGEN__)
PWMDriver PWMD4;
#endif
/**
* @brief PWMD5 driver identifier.
* @note The driver PWMD5 allocates the timer TIM5 when enabled.
*/
#if STM32_PWM_USE_TIM5 || defined(__DOXYGEN__)
PWMDriver PWMD5;
#endif
/**
* @brief PWMD8 driver identifier.
* @note The driver PWMD8 allocates the timer TIM8 when enabled.
*/
#if STM32_PWM_USE_TIM8 || defined(__DOXYGEN__)
PWMDriver PWMD8;
#endif
/**
* @brief PWMD9 driver identifier.
* @note The driver PWMD9 allocates the timer TIM9 when enabled.
*/
#if STM32_PWM_USE_TIM9 || defined(__DOXYGEN__)
PWMDriver PWMD9;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_PWM_USE_TIM1 || defined(__DOXYGEN__)
#if !defined(STM32_TIM1_SUPPRESS_ISR)
#if !defined(STM32_TIM1_UP_HANDLER)
#error "STM32_TIM1_UP_HANDLER not defined"
#endif
/**
* @brief TIM1 update interrupt handler.
* @note It is assumed that this interrupt is only activated if the callback
* pointer is not equal to @p NULL in order to not perform an extra
* check in a potentially critical interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD1);
OSAL_IRQ_EPILOGUE();
}
#if !defined(STM32_TIM1_CC_HANDLER)
#error "STM32_TIM1_CC_HANDLER not defined"
#endif
/**
* @brief TIM1 compare interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD1);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM1_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM1 */
#if STM32_PWM_USE_TIM2 || defined(__DOXYGEN__)
#if !defined(STM32_TIM2_SUPPRESS_ISR)
#if !defined(STM32_TIM2_HANDLER)
#error "STM32_TIM2_HANDLER not defined"
#endif
/**
* @brief TIM2 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM2_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD2);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM2_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM2 */
#if STM32_PWM_USE_TIM3 || defined(__DOXYGEN__)
#if !defined(STM32_TIM3_SUPPRESS_ISR)
#if !defined(STM32_TIM3_HANDLER)
#error "STM32_TIM3_HANDLER not defined"
#endif
/**
* @brief TIM3 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM3_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD3);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM3_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM3 */
#if STM32_PWM_USE_TIM4 || defined(__DOXYGEN__)
#if !defined(STM32_TIM4_SUPPRESS_ISR)
#if !defined(STM32_TIM4_HANDLER)
#error "STM32_TIM4_HANDLER not defined"
#endif
/**
* @brief TIM4 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM4_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD4);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM4_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM4 */
#if STM32_PWM_USE_TIM5 || defined(__DOXYGEN__)
#if !defined(STM32_TIM5_SUPPRESS_ISR)
#if !defined(STM32_TIM5_HANDLER)
#error "STM32_TIM5_HANDLER not defined"
#endif
/**
* @brief TIM5 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM5_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD5);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM5_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM5 */
#if STM32_PWM_USE_TIM8 || defined(__DOXYGEN__)
#if !defined(STM32_TIM8_SUPPRESS_ISR)
#if !defined(STM32_TIM8_UP_HANDLER)
#error "STM32_TIM8_UP_HANDLER not defined"
#endif
/**
* @brief TIM8 update interrupt handler.
* @note It is assumed that this interrupt is only activated if the callback
* pointer is not equal to @p NULL in order to not perform an extra
* check in a potentially critical interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD8);
OSAL_IRQ_EPILOGUE();
}
#if !defined(STM32_TIM8_CC_HANDLER)
#error "STM32_TIM8_CC_HANDLER not defined"
#endif
/**
* @brief TIM8 compare interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD8);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM8_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM8 */
#if STM32_PWM_USE_TIM9 || defined(__DOXYGEN__)
#if !defined(STM32_TIM9_SUPPRESS_ISR)
#if !defined(STM32_TIM9_HANDLER)
#error "STM32_TIM9_HANDLER not defined"
#endif
/**
* @brief TIM9 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_TIM9_HANDLER) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD9);
OSAL_IRQ_EPILOGUE();
}
#endif /* !defined(STM32_TIM9_SUPPRESS_ISR) */
#endif /* STM32_PWM_USE_TIM9 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level PWM driver initialization.
*
* @notapi
*/
void pwm_lld_init(void) {
#if STM32_PWM_USE_TIM1
/* Driver initialization.*/
pwmObjectInit(&PWMD1);
PWMD1.channels = STM32_TIM1_CHANNELS;
PWMD1.tim = STM32_TIM1;
#endif
#if STM32_PWM_USE_TIM2
/* Driver initialization.*/
pwmObjectInit(&PWMD2);
PWMD2.channels = STM32_TIM2_CHANNELS;
PWMD2.tim = STM32_TIM2;
#endif
#if STM32_PWM_USE_TIM3
/* Driver initialization.*/
pwmObjectInit(&PWMD3);
PWMD3.channels = STM32_TIM3_CHANNELS;
PWMD3.tim = STM32_TIM3;
#endif
#if STM32_PWM_USE_TIM4
/* Driver initialization.*/
pwmObjectInit(&PWMD4);
PWMD4.channels = STM32_TIM4_CHANNELS;
PWMD4.tim = STM32_TIM4;
#endif
#if STM32_PWM_USE_TIM5
/* Driver initialization.*/
pwmObjectInit(&PWMD5);
PWMD5.channels = STM32_TIM5_CHANNELS;
PWMD5.tim = STM32_TIM5;
#endif
#if STM32_PWM_USE_TIM8
/* Driver initialization.*/
pwmObjectInit(&PWMD8);
PWMD8.channels = STM32_TIM8_CHANNELS;
PWMD8.tim = STM32_TIM8;
#endif
#if STM32_PWM_USE_TIM9
/* Driver initialization.*/
pwmObjectInit(&PWMD9);
PWMD9.channels = STM32_TIM9_CHANNELS;
PWMD9.tim = STM32_TIM9;
#endif
}
/**
* @brief Configures and activates the PWM peripheral.
* @note Starting a driver that is already in the @p PWM_READY state
* disables all the active channels.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_start(PWMDriver *pwmp) {
uint32_t psc;
uint32_t ccer;
if (pwmp->state == PWM_STOP) {
/* Clock activation and timer reset.*/
#if STM32_PWM_USE_TIM1
if (&PWMD1 == pwmp) {
rccEnableTIM1(FALSE);
rccResetTIM1();
#if !defined(STM32_TIM1_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM1_UP_NUMBER, STM32_PWM_TIM1_IRQ_PRIORITY);
nvicEnableVector(STM32_TIM1_CC_NUMBER, STM32_PWM_TIM1_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM1CLK)
pwmp->clock = STM32_TIM1CLK;
#else
pwmp->clock = STM32_TIMCLK2;
#endif
}
#endif
#if STM32_PWM_USE_TIM2
if (&PWMD2 == pwmp) {
rccEnableTIM2(FALSE);
rccResetTIM2();
#if !defined(STM32_TIM2_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM2_NUMBER, STM32_PWM_TIM2_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM2CLK)
pwmp->clock = STM32_TIM2CLK;
#else
pwmp->clock = STM32_TIMCLK1;
#endif
}
#endif
#if STM32_PWM_USE_TIM3
if (&PWMD3 == pwmp) {
rccEnableTIM3(FALSE);
rccResetTIM3();
#if !defined(STM32_TIM3_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM3_NUMBER, STM32_PWM_TIM3_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM3CLK)
pwmp->clock = STM32_TIM3CLK;
#else
pwmp->clock = STM32_TIMCLK1;
#endif
}
#endif
#if STM32_PWM_USE_TIM4
if (&PWMD4 == pwmp) {
rccEnableTIM4(FALSE);
rccResetTIM4();
#if !defined(STM32_TIM4_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM4_NUMBER, STM32_PWM_TIM4_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM4CLK)
pwmp->clock = STM32_TIM4CLK;
#else
pwmp->clock = STM32_TIMCLK1;
#endif
}
#endif
#if STM32_PWM_USE_TIM5
if (&PWMD5 == pwmp) {
rccEnableTIM5(FALSE);
rccResetTIM5();
#if !defined(STM32_TIM5_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM5_NUMBER, STM32_PWM_TIM5_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM5CLK)
pwmp->clock = STM32_TIM5CLK;
#else
pwmp->clock = STM32_TIMCLK1;
#endif
}
#endif
#if STM32_PWM_USE_TIM8
if (&PWMD8 == pwmp) {
rccEnableTIM8(FALSE);
rccResetTIM8();
#if !defined(STM32_TIM8_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM8_UP_NUMBER, STM32_PWM_TIM8_IRQ_PRIORITY);
nvicEnableVector(STM32_TIM8_CC_NUMBER, STM32_PWM_TIM8_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM8CLK)
pwmp->clock = STM32_TIM8CLK;
#else
pwmp->clock = STM32_TIMCLK2;
#endif
}
#endif
#if STM32_PWM_USE_TIM9
if (&PWMD9 == pwmp) {
rccEnableTIM9(FALSE);
rccResetTIM9();
#if !defined(STM32_TIM9_SUPPRESS_ISR)
nvicEnableVector(STM32_TIM9_NUMBER, STM32_PWM_TIM9_IRQ_PRIORITY);
#endif
#if defined(STM32_TIM9CLK)
pwmp->clock = STM32_TIM9CLK;
#else
pwmp->clock = STM32_TIMCLK2;
#endif
}
#endif
/* All channels configured in PWM1 mode with preload enabled and will
stay that way until the driver is stopped.*/
pwmp->tim->CCMR1 = STM32_TIM_CCMR1_OC1M(6) | STM32_TIM_CCMR1_OC1PE |
STM32_TIM_CCMR1_OC2M(6) | STM32_TIM_CCMR1_OC2PE;
pwmp->tim->CCMR2 = STM32_TIM_CCMR2_OC3M(6) | STM32_TIM_CCMR2_OC3PE |
STM32_TIM_CCMR2_OC4M(6) | STM32_TIM_CCMR2_OC4PE;
#if STM32_TIM_MAX_CHANNELS > 4
pwmp->tim->CCMR3 = STM32_TIM_CCMR3_OC5M(6) | STM32_TIM_CCMR3_OC5PE |
STM32_TIM_CCMR3_OC6M(6) | STM32_TIM_CCMR3_OC6PE;
#endif
}
else {
/* Driver re-configuration scenario, it must be stopped first.*/
pwmp->tim->CR1 = 0; /* Timer disabled. */
pwmp->tim->CCR[0] = 0; /* Comparator 1 disabled. */
pwmp->tim->CCR[1] = 0; /* Comparator 2 disabled. */
pwmp->tim->CCR[2] = 0; /* Comparator 3 disabled. */
pwmp->tim->CCR[3] = 0; /* Comparator 4 disabled. */
#if STM32_TIM_MAX_CHANNELS > 4
if (pwmp->channels > 4) {
pwmp->tim->CCXR[0] = 0; /* Comparator 5 disabled. */
pwmp->tim->CCXR[1] = 0; /* Comparator 6 disabled. */
}
#endif
pwmp->tim->CNT = 0; /* Counter reset to zero. */
}
/* Timer configuration.*/
psc = (pwmp->clock / pwmp->config->frequency) - 1;
osalDbgAssert((psc <= 0xFFFF) &&
((psc + 1) * pwmp->config->frequency) == pwmp->clock,
"invalid frequency");
pwmp->tim->PSC = psc;
pwmp->tim->ARR = pwmp->period - 1;
pwmp->tim->CR2 = pwmp->config->cr2;
/* Output enables and polarities setup.*/
ccer = 0;
switch (pwmp->config->channels[0].mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC1P;
case PWM_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC1E;
default:
;
}
switch (pwmp->config->channels[1].mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC2P;
case PWM_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC2E;
default:
;
}
switch (pwmp->config->channels[2].mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC3P;
case PWM_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC3E;
default:
;
}
switch (pwmp->config->channels[3].mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC4P;
case PWM_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC4E;
default:
;
}
#if STM32_PWM_USE_ADVANCED
#if STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM8
if (&PWMD1 == pwmp) {
#endif
#if !STM32_PWM_USE_TIM1 && STM32_PWM_USE_TIM8
if (&PWMD8 == pwmp) {
#endif
#if STM32_PWM_USE_TIM1 && STM32_PWM_USE_TIM8
if ((&PWMD1 == pwmp) || (&PWMD8 == pwmp)) {
#endif
switch (pwmp->config->channels[0].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC1NP;
case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC1NE;
default:
;
}
switch (pwmp->config->channels[1].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC2NP;
case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC2NE;
default:
;
}
switch (pwmp->config->channels[2].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
ccer |= STM32_TIM_CCER_CC3NP;
case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
ccer |= STM32_TIM_CCER_CC3NE;
default:
;
}
}
#endif /* STM32_PWM_USE_ADVANCED*/
pwmp->tim->CCER = ccer;
pwmp->tim->EGR = STM32_TIM_EGR_UG; /* Update event. */
pwmp->tim->SR = 0; /* Clear pending IRQs. */
pwmp->tim->DIER = pwmp->config->dier & /* DMA-related DIER settings. */
~STM32_TIM_DIER_IRQ_MASK;
#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
#if STM32_PWM_USE_ADVANCED
pwmp->tim->BDTR = pwmp->config->bdtr | STM32_TIM_BDTR_MOE;
#else
pwmp->tim->BDTR = STM32_TIM_BDTR_MOE;
#endif
#endif
/* Timer configured and started.*/
pwmp->tim->CR1 = STM32_TIM_CR1_ARPE | STM32_TIM_CR1_URS |
STM32_TIM_CR1_CEN;
}
/**
* @brief Deactivates the PWM peripheral.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_stop(PWMDriver *pwmp) {
/* If in ready state then disables the PWM clock.*/
if (pwmp->state == PWM_READY) {
pwmp->tim->CR1 = 0; /* Timer disabled. */
pwmp->tim->DIER = 0; /* All IRQs disabled. */
pwmp->tim->SR = 0; /* Clear eventual pending IRQs. */
#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
pwmp->tim->BDTR = 0;
#endif
#if STM32_PWM_USE_TIM1
if (&PWMD1 == pwmp) {
#if !defined(STM32_TIM1_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM1_UP_NUMBER);
nvicDisableVector(STM32_TIM1_CC_NUMBER);
#endif
rccDisableTIM1(FALSE);
}
#endif
#if STM32_PWM_USE_TIM2
if (&PWMD2 == pwmp) {
#if !defined(STM32_TIM2_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM2_NUMBER);
#endif
rccDisableTIM2(FALSE);
}
#endif
#if STM32_PWM_USE_TIM3
if (&PWMD3 == pwmp) {
#if !defined(STM32_TIM3_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM3_NUMBER);
#endif
rccDisableTIM3(FALSE);
}
#endif
#if STM32_PWM_USE_TIM4
if (&PWMD4 == pwmp) {
#if !defined(STM32_TIM4_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM4_NUMBER);
#endif
rccDisableTIM4(FALSE);
}
#endif
#if STM32_PWM_USE_TIM5
if (&PWMD5 == pwmp) {
#if !defined(STM32_TIM5_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM5_NUMBER);
#endif
rccDisableTIM5(FALSE);
}
#endif
#if STM32_PWM_USE_TIM8
if (&PWMD8 == pwmp) {
#if !defined(STM32_TIM8_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM8_UP_NUMBER);
nvicDisableVector(STM32_TIM8_CC_NUMBER);
#endif
rccDisableTIM8(FALSE);
}
#endif
#if STM32_PWM_USE_TIM9
if (&PWMD9 == pwmp) {
#if !defined(STM32_TIM9_SUPPRESS_ISR)
nvicDisableVector(STM32_TIM9_NUMBER);
#endif
rccDisableTIM9(FALSE);
}
#endif
}
}
/**
* @brief Enables a PWM channel.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is active using the specified configuration.
* @note The function has effect at the next cycle start.
* @note Channel notification is not enabled.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
* @param[in] width PWM pulse width as clock pulses number
*
* @notapi
*/
void pwm_lld_enable_channel(PWMDriver *pwmp,
pwmchannel_t channel,
pwmcnt_t width) {
/* Changing channel duty cycle on the fly.*/
#if STM32_TIM_MAX_CHANNELS <= 4
pwmp->tim->CCR[channel] = width;
#else
if (channel < 4)
pwmp->tim->CCR[channel] = width;
else
pwmp->tim->CCXR[channel - 4] = width;
#endif
}
/**
* @brief Disables a PWM channel and its notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is disabled and its output line returned to the
* idle state.
* @note The function has effect at the next cycle start.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
#if STM32_TIM_MAX_CHANNELS <= 4
pwmp->tim->CCR[channel] = 0;
pwmp->tim->DIER &= ~(2 << channel);
#else
if (channel < 4) {
pwmp->tim->CCR[channel] = 0;
pwmp->tim->DIER &= ~(2 << channel);
}
else
pwmp->tim->CCXR[channel - 4] = 0;
#endif
}
/**
* @brief Enables the periodic activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @note If the notification is already enabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
uint32_t dier = pwmp->tim->DIER;
/* If the IRQ is not already enabled care must be taken to clear it,
it is probably already pending because the timer is running.*/
if ((dier & STM32_TIM_DIER_UIE) == 0) {
pwmp->tim->DIER = dier | STM32_TIM_DIER_UIE;
pwmp->tim->SR &= STM32_TIM_SR_UIF;
}
}
/**
* @brief Disables the periodic activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @note If the notification is already disabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
pwmp->tim->DIER &= ~STM32_TIM_DIER_UIE;
}
/**
* @brief Enables a channel de-activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @pre The channel must have been activated using @p pwmEnableChannel().
* @note If the notification is already enabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
uint32_t dier = pwmp->tim->DIER;
#if STM32_TIM_MAX_CHANNELS > 4
/* Channels 4 and 5 do not support callbacks.*/
osalDbgAssert(channel < 4, "callback not supported");
#endif
/* If the IRQ is not already enabled care must be taken to clear it,
it is probably already pending because the timer is running.*/
if ((dier & (2 << channel)) == 0) {
pwmp->tim->DIER = dier | (2 << channel);
pwmp->tim->SR = ~(2 << channel);
}
}
/**
* @brief Disables a channel de-activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @pre The channel must have been activated using @p pwmEnableChannel().
* @note If the notification is already disabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
pwmp->tim->DIER &= ~(2 << channel);
}
/**
* @brief Common TIM2...TIM5,TIM9 IRQ handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
uint32_t sr;
sr = pwmp->tim->SR;
sr &= pwmp->tim->DIER & STM32_TIM_DIER_IRQ_MASK;
pwmp->tim->SR = ~sr;
if (((sr & STM32_TIM_SR_CC1IF) != 0) &&
(pwmp->config->channels[0].callback != NULL))
pwmp->config->channels[0].callback(pwmp);
if (((sr & STM32_TIM_SR_CC2IF) != 0) &&
(pwmp->config->channels[1].callback != NULL))
pwmp->config->channels[1].callback(pwmp);
if (((sr & STM32_TIM_SR_CC3IF) != 0) &&
(pwmp->config->channels[2].callback != NULL))
pwmp->config->channels[2].callback(pwmp);
if (((sr & STM32_TIM_SR_CC4IF) != 0) &&
(pwmp->config->channels[3].callback != NULL))
pwmp->config->channels[3].callback(pwmp);
if (((sr & STM32_TIM_SR_UIF) != 0) && (pwmp->config->callback != NULL))
pwmp->config->callback(pwmp);
}
#endif /* HAL_USE_PWM */
/** @} */
Reference in New Issue View Git Blame Copy Permalink