ctdo
/
crashtest-r0ket
16
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
crashtest-r0ket/firmware/core/sysinit.c

281 lines
8.3 KiB
C
Raw Blame History

/**************************************************************************/
/*!
@file sysinit.c
@author K. Townsend (microBuilder.eu)
@date 22 March 2010
@version 0.10
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2010, microBuilder SARL
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "sysinit.h"
#include "core/cpu/cpu.h"
#include "core/pmu/pmu.h"
#include "core/adc/adc.h"
#ifdef CFG_PRINTF_UART
#include "core/uart/uart.h"
#endif
#ifdef CFG_INTERFACE
#include "core/cmd/cmd.h"
#endif
#ifdef CFG_CHIBI
#include "drivers/chibi/chb.h"
#endif
#ifdef CFG_USBHID
#include "core/usbhid-rom/usbhid.h"
#endif
#ifdef CFG_USBCDC
volatile unsigned int lastTick;
#include "core/usbcdc/usb.h"
#include "core/usbcdc/usbcore.h"
#include "core/usbcdc/usbhw.h"
#include "core/usbcdc/cdcuser.h"
#include "core/usbcdc/cdc_buf.h"
#endif
#ifdef CFG_ST7565
#include "drivers/lcd/bitmap/st7565/st7565.h"
#include "drivers/lcd/smallfonts.h"
#endif
#ifdef CFG_SSD1306
#include "drivers/lcd/bitmap/ssd1306/ssd1306.h"
#include "drivers/lcd/smallfonts.h"
#endif
#ifdef CFG_TFTLCD
#include "drivers/lcd/tft/lcd.h"
#include "drivers/lcd/tft/touchscreen.h"
#include "drivers/lcd/tft/drawing.h"
#endif
#ifdef CFG_I2CEEPROM
#include "drivers/eeprom/mcp24aa/mcp24aa.h"
#include "drivers/eeprom/eeprom.h"
#endif
#ifdef CFG_PWM
#include "core/pwm/pwm.h"
#endif
#ifdef CFG_SDCARD
#include "core/ssp/ssp.h"
#include "drivers/fatfs/diskio.h"
#include "drivers/fatfs/ff.h"
DWORD get_fattime ()
{
// ToDo!
return 0;
}
#endif
/**************************************************************************/
/*!
Configures the core system clock and sets up any mandatory
peripherals like the systick timer, UART for printf, etc.
This function should set the HW to the default state you wish to be
in coming out of reset/startup, such as disabling or enabling LEDs,
setting specific pin states, etc.
*/
/**************************************************************************/
void systemInit()
{
cpuInit(); // Configure the CPU
systickInit(CFG_SYSTICK_DELAY_IN_MS); // Start systick timer
gpioInit(); // Enable GPIO
pmuInit(); // Configure power management
adcInit(); // Config adc pins to save power
// Set LED pin as output and turn LED off
gpioSetDir(CFG_LED_PORT, CFG_LED_PIN, 1);
gpioSetValue(CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
// Initialise EEPROM
#ifdef CFG_I2CEEPROM
mcp24aaInit();
#endif
// Initialise UART with the default baud rate
#ifdef CFG_PRINTF_UART
uint32_t uart = eepromReadU32(CFG_EEPROM_UART_SPEED);
if ((uart == 0xFFFFFFFF) || (uart > 115200))
{
uartInit(CFG_UART_BAUDRATE); // Use default baud rate
}
else
{
uartInit(uart); // Use baud rate from EEPROM
}
#endif
// Initialise PWM (requires 16-bit Timer 1 and P1.9)
#ifdef CFG_PWM
pwmInit();
#endif
// Initialise USB HID
#ifdef CFG_USBHID
usbHIDInit();
#endif
// Initialise USB CDC
#ifdef CFG_USBCDC
lastTick = systickGetTicks(); // Used to control output/printf timing
CDC_Init(); // Initialise VCOM
USB_Init(); // USB Initialization
USB_Connect(TRUE); // USB Connect
// Wait until USB is configured or timeout occurs
uint32_t usbTimeout = 0;
while ( usbTimeout < CFG_USBCDC_INITTIMEOUT / 10 )
{
if (USB_Configuration) break;
systickDelay(10); // Wait 10ms
usbTimeout++;
}
#endif
// Printf can now be used with UART or USBCDC
// Initialise the ST7565 128x64 pixel display
#ifdef CFG_ST7565
st7565Init();
st7565ClearScreen(); // Clear the screen
st7565Backlight(1); // Enable the backlight
#endif
// Initialise the SSD1306 OLED display
#ifdef CFG_SSD1306
ssd1306Init(SSD1306_SWITCHCAPVCC);
ssd1306ClearScreen(); // Clear the screen
#endif
// Initialise TFT LCD Display
#ifdef CFG_TFTLCD
lcdInit();
#endif
// Initialise Chibi
// Warning: CFG_CHIBI must be disabled if no antenna is connected,
// otherwise the SW will halt during initialisation
#ifdef CFG_CHIBI
// Write addresses to EEPROM for the first time if necessary
// uint16_t addr_short = 0x0025;
// uint64_t addr_ieee = 0x0000000000000025;
// mcp24aaWriteBuffer(CFG_EEPROM_CHIBI_SHORTADDR, (uint8_t *)&addr_short, 2);
// mcp24aaWriteBuffer(CFG_EEPROM_CHIBI_IEEEADDR, (uint8_t *)&addr_ieee, 8);
chb_init();
// chb_pcb_t *pcb = chb_get_pcb();
// printf("%-40s : 0x%04X%s", "Chibi Initialised", pcb->src_addr, CFG_PRINTF_NEWLINE);
#endif
// Start the command line interface
#ifdef CFG_INTERFACE
cmdInit();
#endif
}
/**************************************************************************/
/*!
@brief Sends a single byte to a pre-determined peripheral (UART, etc.).
@param[in] byte
Byte value to send
*/
/**************************************************************************/
void __putchar(const char c)
{
#ifdef CFG_PRINTF_UART
// Send output to UART
uartSendByte(c);
#endif
}
#ifdef CFG_USBCDC
/**************************************************************************/
/*!
@brief Sends a string to a pre-determined end point (UART, etc.).
@param[in] str
Text to send
@note This function is only called when using the GCC-compiler
in Codelite or running the Makefile manually. This function
will not be called when using the C library in Crossworks for
ARM.
*/
/**************************************************************************/
int puts(const char * str)
{
// There must be at least 1ms between USB frames (of up to 64 bytes)
// This buffers all data and writes it out from the buffer one frame
// and one millisecond at a time
#ifdef CFG_PRINTF_USBCDC
if (USB_Configuration)
{
while(*str)
cdcBufferWrite(*str++);
// Check if we can flush the buffer now or if we need to wait
unsigned int currentTick = systickGetTicks();
if (currentTick != lastTick)
{
uint8_t frame[64];
uint32_t bytesRead = 0;
while (cdcBufferDataPending())
{
// Read up to 64 bytes as long as possible
bytesRead = cdcBufferReadLen(frame, 64);
USB_WriteEP (CDC_DEP_IN, frame, bytesRead);
systickDelay(1);
}
lastTick = currentTick;
}
}
#else
// Handle output character by character in __putchar
while(*str) __putchar(*str++);
#endif
return 0;
}
#endif
Reference in New Issue View Git Blame Copy Permalink