416 lines
9.9 KiB
C
416 lines
9.9 KiB
C
#include <basic/basic.h>
|
|
#include <nrf24l01p.h>
|
|
#include "core/ssp/ssp.h"
|
|
#include "basic/xxtea.h"
|
|
|
|
#define DEFAULT_SPEED R_RF_SETUP_DR_2M
|
|
|
|
uint8_t _nrfresets=0;
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
/* Transmit a byte via SPI */
|
|
/*-----------------------------------------------------------------------*/
|
|
inline void xmit_spi(uint8_t dat) {
|
|
sspSend(0, (uint8_t*) &dat, 1);
|
|
}
|
|
|
|
inline void rcv_spi(uint8_t *dat) {
|
|
sspReceive(0, dat, 1);
|
|
}
|
|
|
|
#define CS_LOW() gpioSetValue(RB_SPI_NRF_CS, 0)
|
|
#define CS_HIGH() gpioSetValue(RB_SPI_NRF_CS, 1)
|
|
#define CE_LOW() gpioSetValue(RB_NRF_CE, 0)
|
|
#define CE_HIGH() gpioSetValue(RB_NRF_CE, 1)
|
|
|
|
void nrf_cmd(uint8_t cmd){
|
|
CS_LOW();
|
|
xmit_spi(cmd);
|
|
CS_HIGH();
|
|
};
|
|
|
|
uint8_t nrf_cmd_status(uint8_t cmd){
|
|
CS_LOW();
|
|
sspSendReceive(0, &cmd, 1);
|
|
CS_HIGH();
|
|
return cmd;
|
|
};
|
|
|
|
void nrf_cmd_rw_long(uint8_t* data, int len){
|
|
CS_LOW();
|
|
sspSendReceive(0,data,len);
|
|
CS_HIGH();
|
|
};
|
|
|
|
|
|
void nrf_write_reg(const uint8_t reg, const uint8_t val){
|
|
CS_LOW();
|
|
xmit_spi(C_W_REGISTER | reg);
|
|
xmit_spi(val);
|
|
CS_HIGH();
|
|
};
|
|
|
|
uint8_t nrf_read_reg(const uint8_t reg){
|
|
uint8_t val;
|
|
CS_LOW();
|
|
xmit_spi(C_R_REGISTER | reg);
|
|
rcv_spi(&val);
|
|
CS_HIGH();
|
|
return val;
|
|
};
|
|
|
|
void nrf_read_long(const uint8_t cmd, int len, uint8_t* data){
|
|
CS_LOW();
|
|
xmit_spi(cmd);
|
|
for(int i=0;i<len;i++)
|
|
data[i] = 0x00;
|
|
sspSendReceive(0,data,len);
|
|
CS_HIGH();
|
|
};
|
|
|
|
void nrf_read_pkt(int len, uint8_t* data){
|
|
CS_LOW();
|
|
xmit_spi(C_R_RX_PAYLOAD);
|
|
sspReceive(0,data,len);
|
|
CS_HIGH();
|
|
};
|
|
|
|
void nrf_read_pkt_crc(int len, uint8_t* data, uint8_t* crc){
|
|
CS_LOW();
|
|
xmit_spi(C_R_RX_PAYLOAD);
|
|
sspReceive(0,data,len);
|
|
sspReceive(0,crc,2);
|
|
CS_HIGH();
|
|
};
|
|
|
|
void nrf_write_long(const uint8_t cmd, int len, const uint8_t* data){
|
|
CS_LOW();
|
|
xmit_spi(cmd);
|
|
sspSend(0,data,len);
|
|
CS_HIGH();
|
|
};
|
|
|
|
#define nrf_write_reg_long(reg, len, data) \
|
|
nrf_write_long(C_W_REGISTER|(reg), len, data)
|
|
|
|
// High-Level:
|
|
void nrf_rcv_pkt_start(void){
|
|
|
|
nrf_write_reg(R_CONFIG,
|
|
R_CONFIG_PRIM_RX| // Receive mode
|
|
R_CONFIG_PWR_UP| // Power on
|
|
R_CONFIG_EN_CRC // CRC on, single byte
|
|
);
|
|
|
|
nrf_cmd(C_FLUSH_RX);
|
|
nrf_write_reg(R_STATUS,0);
|
|
|
|
CE_HIGH();
|
|
};
|
|
|
|
int nrf_rcv_pkt_poll(int maxsize, uint8_t * pkt){
|
|
uint8_t len;
|
|
uint8_t status=0;
|
|
|
|
for(int i=0;i<maxsize;i++) pkt[i] = 0x00; // Sanity: clear packet buffer
|
|
|
|
status =nrf_cmd_status(C_NOP);
|
|
|
|
if((status & R_STATUS_RX_P_NO) == R_STATUS_RX_FIFO_EMPTY){
|
|
if( (status & R_STATUS_RX_DR) == R_STATUS_RX_DR){
|
|
#ifdef USB_CDC
|
|
puts("FIFO empty, but RX?\r\n");
|
|
#endif
|
|
nrf_write_reg(R_STATUS,R_STATUS_RX_DR);
|
|
};
|
|
return 0;
|
|
};
|
|
|
|
nrf_read_long(C_R_RX_PL_WID,1,&len);
|
|
|
|
nrf_write_reg(R_STATUS,R_STATUS_RX_DR);
|
|
if(len>32 || len==0){
|
|
return -2; // no packet error
|
|
};
|
|
|
|
if(len>maxsize){
|
|
return -1; // packet too large
|
|
};
|
|
|
|
nrf_read_pkt(len,pkt);
|
|
|
|
return len;
|
|
};
|
|
|
|
int nrf_rcv_pkt_poll_dec(int maxsize, uint8_t * pkt, uint32_t const key[4]){
|
|
int len;
|
|
uint16_t cmpcrc;
|
|
|
|
len=nrf_rcv_pkt_poll(maxsize,pkt);
|
|
|
|
if(len <=0)
|
|
return len;
|
|
|
|
if(key==NULL)
|
|
return len;
|
|
|
|
cmpcrc=crc16(pkt,len-2);
|
|
if(key!=NULL)
|
|
xxtea_decode_words((uint32_t*)pkt,len/4,key);
|
|
|
|
cmpcrc=crc16(pkt,len-2);
|
|
if(cmpcrc != (pkt[len-2] <<8 | pkt[len-1])) {
|
|
return -3; // CRC failed
|
|
};
|
|
return len;
|
|
};
|
|
|
|
void nrf_rcv_pkt_end(void){
|
|
CE_LOW();
|
|
nrf_cmd(C_FLUSH_RX);
|
|
nrf_write_reg(R_STATUS,R_STATUS_RX_DR);
|
|
};
|
|
|
|
// High-Level:
|
|
int nrf_rcv_pkt_time_encr(int maxtime, int maxsize, uint8_t * pkt, uint32_t const key[4]){
|
|
uint8_t len;
|
|
uint8_t status=0;
|
|
uint16_t cmpcrc;
|
|
|
|
nrf_write_reg(R_CONFIG,
|
|
R_CONFIG_PRIM_RX| // Receive mode
|
|
R_CONFIG_PWR_UP| // Power on
|
|
R_CONFIG_EN_CRC // CRC on, single byte
|
|
);
|
|
|
|
nrf_cmd(C_FLUSH_RX);
|
|
nrf_write_reg(R_STATUS,0);
|
|
|
|
CE_HIGH();
|
|
|
|
for(int i=0;i<maxsize;i++) pkt[i] = 0x00; // Sanity: clear packet buffer
|
|
|
|
#define LOOPY 10
|
|
for (;maxtime >= LOOPY;maxtime-=LOOPY){
|
|
delayms(LOOPY);
|
|
status =nrf_cmd_status(C_NOP);
|
|
if( (status & R_STATUS_RX_DR) == R_STATUS_RX_DR){
|
|
if( (status & R_STATUS_RX_P_NO) == R_STATUS_RX_FIFO_EMPTY){
|
|
nrf_cmd(C_FLUSH_RX);
|
|
delayms(1);
|
|
nrf_write_reg(R_STATUS,0);
|
|
continue;
|
|
}else{ // Get/Check packet...
|
|
nrf_read_long(C_R_RX_PL_WID,1,&len);
|
|
if(len>32 || len==0){
|
|
continue;
|
|
return -2; // no packet error
|
|
};
|
|
|
|
if(len>maxsize){
|
|
continue;
|
|
return -1; // packet too large
|
|
};
|
|
|
|
nrf_read_pkt(len,pkt);
|
|
if(key != NULL)
|
|
xxtea_decode_words((uint32_t*)pkt,len/4,key);
|
|
|
|
cmpcrc=crc16(pkt,len-2);
|
|
if(cmpcrc != (pkt[len-2] <<8 | pkt[len-1])) {
|
|
continue;
|
|
return -3; // CRC failed
|
|
};
|
|
break;
|
|
};
|
|
};
|
|
};
|
|
|
|
CE_LOW();
|
|
CS_HIGH();
|
|
|
|
if(maxtime<LOOPY)
|
|
return 0; // timeout
|
|
|
|
return len;
|
|
};
|
|
|
|
|
|
char nrf_snd_pkt_crc_encr(int size, uint8_t * pkt, uint32_t const key[4]){
|
|
|
|
if(size > MAX_PKT)
|
|
size=MAX_PKT;
|
|
|
|
nrf_write_reg(R_CONFIG,
|
|
R_CONFIG_PWR_UP| // Power on
|
|
R_CONFIG_EN_CRC // CRC on, single byte
|
|
);
|
|
|
|
// nrf_write_long(C_W_TX_PAYLOAD,size,pkt);
|
|
uint16_t crc=crc16(pkt,size-2);
|
|
pkt[size-2]=(crc >>8) & 0xff;
|
|
pkt[size-1]=crc & 0xff;
|
|
if(key !=NULL)
|
|
xxtea_encode_words((uint32_t*)pkt,size/4,key);
|
|
|
|
CS_LOW();
|
|
xmit_spi(C_W_TX_PAYLOAD);
|
|
sspSend(0,pkt,size);
|
|
CS_HIGH();
|
|
|
|
CE_HIGH();
|
|
delayms(1); // Send it. (only needs >10ys, i think)
|
|
CE_LOW();
|
|
|
|
return nrf_cmd_status(C_NOP);
|
|
};
|
|
|
|
void nrf_set_rx_mac(int pipe, int rxlen, int maclen, const uint8_t * mac){
|
|
#ifdef SAFE
|
|
assert(maclen>=1 || maclen<=5);
|
|
assert(rxlen>=1 || rxlen<=32);
|
|
assert(pipe>=0 || pipe<=5);
|
|
assert(mac!=NULL);
|
|
if(pipe>1)
|
|
assert(maclen==1);
|
|
#endif
|
|
nrf_write_reg(R_RX_PW_P0+pipe,rxlen);
|
|
|
|
nrf_write_reg_long(R_RX_ADDR_P0+pipe,maclen,mac);
|
|
nrf_write_reg(R_EN_RXADDR,
|
|
nrf_read_reg(R_EN_RXADDR) | (1<<pipe)
|
|
);
|
|
};
|
|
|
|
void nrf_set_tx_mac(int maclen, const uint8_t * mac){
|
|
#ifdef SAFE
|
|
assert(maclen>=1 || maclen<=5);
|
|
assert(mac!=NULL);
|
|
#endif
|
|
nrf_write_reg_long(R_TX_ADDR,maclen,mac);
|
|
};
|
|
|
|
void nrf_disable_pipe(int pipe){
|
|
#ifdef SAFE
|
|
assert(pipe>=0 || pipe<=5);
|
|
#endif
|
|
nrf_write_reg(R_EN_RXADDR,
|
|
nrf_read_reg(R_EN_RXADDR) & ~(1<<pipe)
|
|
);
|
|
};
|
|
|
|
void nrf_set_channel(int channel){
|
|
#ifdef SAFE
|
|
assert(channel &~R_RF_CH_BITS ==0);
|
|
#endif
|
|
nrf_write_reg(R_RF_CH, channel);
|
|
};
|
|
|
|
void nrf_config_set(nrfconfig config){
|
|
nrf_write_reg(R_SETUP_AW,R_SETUP_AW_5);
|
|
|
|
nrf_set_channel(config->channel);
|
|
|
|
for(int i=0;i<config->nrmacs;i++){
|
|
nrf_write_reg(R_RX_PW_P0+i,config->maclen[i]);
|
|
if(i==0){
|
|
nrf_write_reg_long(R_RX_ADDR_P0,5,config->mac0);
|
|
}else if(i==1){
|
|
nrf_write_reg_long(R_RX_ADDR_P1,5,config->mac1);
|
|
}else if(i>1){
|
|
nrf_write_reg_long(R_RX_ADDR_P0+i,1,config->mac2345+i-2);
|
|
};
|
|
};
|
|
|
|
nrf_write_reg_long(R_TX_ADDR,5,config->txmac);
|
|
|
|
nrf_write_reg(R_EN_RXADDR,(1<<config->nrmacs)-1);
|
|
};
|
|
|
|
void nrf_config_get(nrfconfig config){
|
|
// nrf_write_reg(R_SETUP_AW,R_SETUP_AW_5);
|
|
|
|
config->channel=nrf_read_reg(R_RF_CH);
|
|
|
|
config->nrmacs=nrf_read_reg(R_EN_RXADDR);
|
|
if(config->nrmacs & R_EN_RXADDR_ERX_P5 )
|
|
config->nrmacs=6;
|
|
else if(config->nrmacs & R_EN_RXADDR_ERX_P4 )
|
|
config->nrmacs=5;
|
|
else if(config->nrmacs & R_EN_RXADDR_ERX_P3 )
|
|
config->nrmacs=4;
|
|
else if(config->nrmacs & R_EN_RXADDR_ERX_P2 )
|
|
config->nrmacs=3;
|
|
else if(config->nrmacs & R_EN_RXADDR_ERX_P1 )
|
|
config->nrmacs=2;
|
|
else
|
|
config->nrmacs=1;
|
|
|
|
// config->nrmacs=6;
|
|
|
|
for(int i=0;i<config->nrmacs;i++){
|
|
config->maclen[i]=nrf_read_reg(R_RX_PW_P0+i);
|
|
if(i==0){
|
|
nrf_read_long(R_RX_ADDR_P0,5,config->mac0);
|
|
}else if(i==1){
|
|
nrf_read_long(R_RX_ADDR_P1,5,config->mac1);
|
|
}else if(i>1){
|
|
nrf_read_long(R_RX_ADDR_P0+i,1,config->mac2345+i-2);
|
|
};
|
|
};
|
|
|
|
nrf_read_long(R_TX_ADDR,5,config->txmac);
|
|
|
|
};
|
|
|
|
void nrf_set_strength(unsigned char strength){
|
|
if(strength>3)
|
|
strength=3;
|
|
nrf_write_reg(R_RF_SETUP,DEFAULT_SPEED|(strength<<1));
|
|
};
|
|
|
|
void nrf_init() {
|
|
// Enable SPI correctly
|
|
sspInit(0, sspClockPolarity_Low, sspClockPhase_RisingEdge);
|
|
|
|
// Enable CS & CE pins
|
|
gpioSetDir(RB_SPI_NRF_CS, gpioDirection_Output);
|
|
gpioSetPullup(&RB_SPI_NRF_CS_IO, gpioPullupMode_Inactive);
|
|
gpioSetDir(RB_NRF_CE, gpioDirection_Output);
|
|
gpioSetPullup(&RB_NRF_CE_IO, gpioPullupMode_PullUp);
|
|
CE_LOW();
|
|
|
|
// Setup for nrf24l01+
|
|
// power up takes 1.5ms - 3.5ms (depending on crystal)
|
|
CS_LOW();
|
|
nrf_write_reg(R_CONFIG,
|
|
R_CONFIG_PRIM_RX| // Receive mode
|
|
R_CONFIG_PWR_UP| // Power on
|
|
R_CONFIG_EN_CRC // CRC on, single byte
|
|
);
|
|
|
|
nrf_write_reg(R_EN_AA, 0); // Disable Enhanced ShockBurst;
|
|
|
|
// Set speed / strength
|
|
nrf_write_reg(R_RF_SETUP,DEFAULT_SPEED|R_RF_SETUP_RF_PWR_3);
|
|
|
|
// Clear MAX_RT, just in case.
|
|
nrf_write_reg(R_STATUS,R_STATUS_MAX_RT);
|
|
};
|
|
|
|
void nrf_off() {
|
|
nrf_write_reg(R_CONFIG,
|
|
R_CONFIG_MASK_RX_DR|
|
|
R_CONFIG_MASK_TX_DS|
|
|
R_CONFIG_MASK_MAX_RT
|
|
); // Most important: no R_CONFIG_PWR_UP
|
|
};
|
|
|
|
|
|
void nrf_check_reset(void){
|
|
if(nrf_cmd_status(C_NOP) & R_STATUS_MAX_RT){
|
|
_nrfresets++;
|
|
nrf_init();
|
|
};
|
|
};
|