crashtest-r0ket/firmware/usbcdc/config.h

41 lines
1.3 KiB
C
Raw Permalink Normal View History

2011-07-10 16:02:07 +00:00
/*****************************************************************************
* config.h: config file for usbcdc example for NXP LPC13xx Family
* Microprocessors
*
* Copyright(C) 2008, NXP Semiconductor
* All rights reserved.
*
* History
* 2008.07.19 ver 1.00 Preliminary version, first Release
*
******************************************************************************/
/*
Overview:
This example shows how to use the USB driver to implement a CDC class USB peripheral.
To run this example, you must attach a USB cable to the board. See
the "Getting Started Guide" appendix for details.
How to use:
Click the debug toolbar button.
Click the go button.
Plug the LPCXpresso's target side into a PC using a USB cable retrofit
or a 3rd party base board.
* You should be able to see a new COM port on your PC.
*/
#include "projectconfig.h"
#define USB_VENDOR_ID CFG_USB_VID // Vendor ID
#define USB_PROD_ID CFG_USB_PID // Product ID
#define USB_DEVICE 0x0100 // Device ID
#define LED_PORT 0 // Port for led
#define LED_BIT 7 // Bit on port for led
/*********************************************************************************
** End Of File
*********************************************************************************/